Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TA350
- Product Code
- TA350
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
LIQUID PAINT
Manufacturers & Suppliers
WATSON COATINGS, INC.
manufacturer
P. O. BOX 35067, 325 PAUL AVENUE, ST. LOUIS, MO 63135
WATSON COATINGS, INC.
manufacturer
P. O. BOX 35067, 325 PAUL AVENUE, ST. LOUIS, MO 63135
314-521-2000
Emergency Contacts
Emergency Contact
800-424-9300
Emergency Contact
800-424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS07
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-BUTOXYETHANOL | 111-76-2 | 9.6% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Wash with soap and water.
Immediately flush eyes with plenty of water.
If swallowed, keep at rest.
Immediate Medical Attention
Get medical attention if irritation persists (eye/skin). Get immediate medical attention (inhalation). Get prompt medical attention (ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
ALCOHOL FOAM, CO₂, DRY CHEMICAL, WATER FOG
Combustible Liquid. Can form explosive mixtures at temperatures at or above the flashpoint. Containers can build up pressure if exposed to heat (fire).
Containers can build up pressure if exposed to heat (fire).
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand (MSHA/NIOSH approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Absorb spill with inert material (e.g. dry sand or earth), then place in a chemical waste container.
Avoid runoff into storm sewers and ditches which lead to waterways.
Absorb spill with inert material (e.g. dry sand or earth), then place in a chemical waste container.
Materials: inert material (e.g. dry sand or earth)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash thoroughly after handling.
Keep from freezing. Keep container closed when not in use.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Good general ventilation should be sufficient to control airborne levels.
Gloves are required for prolonged or repeated contact. Refer to safety equipment supplier for effective glove recommendations.
Wear safety glasses with side shields (or goggles) and a face shield.
Provide sufficient ventilation to keep vapor concentrations below the given TLV and LEL levels. A NIOSH/MSHA approved air purifying respirator with an organic vapor cartridge or canister is recommended where airborne concentrations are expected to exceed exposure limits.
Use chemical splash goggles and face shield (ANSI Z87.1 or approved equivalent).
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This product is stable under normal storage conditions.
Will not occur under normal conditions.
Avoid opening drums in unventilated areas to avoid concentrated ammonia vapors. Do not store in freezing temperatures.
Do NOT try to reduce with organic solvents, as the material will gell.
This material will not burn until the water has boiled off. At that time, the material will emit carbon monoxide, carbon dioxide and hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TA350?
The signal word is warning.
What is the physical form of TA350?
TA350 is a liquid appearing as clear . It has mild odor.
What is TA350 used for?
LIQUID PAINT
What are the hazard statements for TA350?
This substance has 5 hazard statements:
- H227: Liquid coating and vapors may be combustible at elevated temperatures.
- H302: Harmful if swallowed.
- H317: May cause allergic skin reaction.
- H319: Causes eye irritation.
- H332: Harmful if inhaled.