NextSDS Logo
Safety Data Sheet EN

2,3-Dichlorobutane

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
2,3-Dichlorobutane
Product Code
AC113270000; AC113270250; AC113271000

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Laboratory chemicals.

Uses advised against

Food, drug, pesticide or biocidal product use.

Manufacturers & Suppliers

F

Fisher Scientific Company

manufacturer

One Reagent Lane, Fair Lawn, NJ 07410

(201) 796-7100

A

Acros Organics

manufacturer

One Reagent Lane, Fair Lawn, NJ 07410

Emergency Contacts

Emergency Contact

001-800-227-6701

Emergency Contact

+32 14 57 52 11

Emergency Contact

001-201-796-7100

Emergency Contact

+32 14 57 52 99

CHEMTREC

001-800-424-9300

CHEMTREC

001-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2
Acute Tox. Cat. 4
Skin Sens. Cat. 1

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H225 Highly flammable liquid and vapor
H302 Harmful if swallowed
H317 May cause an allergic skin reaction

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking
P233 Keep container tightly closed
P240 Ground and bond container and receiving equipment
P241 Use explosion-proof electrical/ventilating/lighting equipment
P242 Use non-sparking tools
P243 Take action to prevent static discharges
P261 Avoid breathing dust/fume/gas/mist/vapors/spray
P264 Wash face, hands and any exposed skin thoroughly after handling
P270 Do not eat, drink or smoke when using this product
P272 Contaminated work clothing should not be allowed out of the workplace
P280 Wear protective gloves/protective clothing/eye protection/face protection
P301 + P312 IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower
P330 Rinse mouth
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention
P362 + P364 Take off contaminated clothing and wash before reuse
P370 + P378 In case of fire: Use CO2, dry chemical, or foam to extinguish
P403 + P235 Store in a well-ventilated place. Keep cool
P501 Dispose of contents/container to an approved waste disposal plant

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
2,3-Dichlorobutane 7581-97-7 98% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove from exposure, lie down. Remove to fresh air.

Symptoms: Difficulty in breathing. Inhalation of high vapor concentrations may cause symptoms like headache, dizziness, tiredness, nausea and vomiting.

Skin contact

Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes.

Symptoms: May cause allergic skin reaction. Symptoms of allergic reaction may include rash, itching, swelling, trouble breathing, tingling of the hands and feet, dizziness, lightheadedness, chest pain, muscle pain or flushing.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.

Ingestion

Clean mouth with water.

Symptoms: Nausea and vomiting.

Immediate Medical Attention

Get medical attention.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide (CO₂). Dry chemical. Chemical foam. Water mist may be used to cool closed containers.

Unsuitable media

No information available

Specific hazards

Flammable. Vapors may travel to source of ignition and flash back. Containers may explode when heated. Vapors may form explosive mixtures with air.

Firefighter Protection

As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

See Section 12 for additional Ecological Information.

Cleanup methods

Soak up with inert absorbent material. Keep in suitable, closed containers for disposal. Remove all sources of ignition. Use spark-proof tools and explosion-proof equipment.

Materials: sand, silica gel, acid binder, universal binder, sawdust

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with skin and eyes. Do not breathe mist/vapors/spray. Use spark-proof tools and explosion-proof equipment. Use only non-sparking tools. Keep away from open flames, hot surfaces and sources of ignition. To avoid ignition of vapors by static electricity discharge, all metal parts of the equipment must be grounded. Take precautionary measures against static discharges.

Storage

Keep in a dry, cool and well-ventilated place. Keep container tightly closed. Keep away from heat, sparks and flame. Flammables area.

Fire prevention

Keep away from open flames, hot surfaces and sources of ignition. Use spark-proof tools and explosion-proof equipment. All metal parts of the equipment must be grounded. Take precautionary measures against static discharges.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use explosion-proof electrical/ventilating/lighting equipment. Ensure adequate ventilation, especially in confined areas.

Hands

Wear appropriate protective gloves and clothing to prevent skin exposure.

Eyes

Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.

Respiratory

No protective equipment is needed under normal use conditions.

Skin/Body

Wear appropriate protective gloves and clothing to prevent skin exposure.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Voc Content
---
State Under Standard Conditions
---
Solubility In Fat
No information available
Solidification Point
---
Density
---
Decomposition Temperature
No data available
Ph
No information available
Softening Point
No data available
Form
---
Properties Status
---
Upper Explosive Limit
---
Crystallisation Point
---
Boiling Point
117 - 119 °C / 242.6 - 246.2 °F
Colour Intensity
---
Relative Density
1.100
Odor
No information available
Flash Point
18 °C / 64.4 °F
Evaporation Rate
---
Kinematic Viscosity
---
Appearance
Light yellow
Dynamic Viscosity
---
Colour
Light yellow
Melting Point
-80 °C / -112 °F
Relative Evaporation Rate
---
Metal Corrosion
---
Molecular Weight
127.01
Solubility
No information available
Auto Ignition Temperature
No data available
Solubility In Water
No information available
Bulk Density
Not applicable
Flammability
Highly flammable
Cloud Point
---
Physical State Data
liquid
Odor Threshold
No information available
Vapor Pressure
No information available
Freezing Point
---
Vapor Density
4.4 (Air = 1.0)
Physical State
Liquid
Partition Coefficient
No information available
Explosive Limits
---
Lower Explosive Limit
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

None known, based on information available

Hazardous reactions

None under normal processing. Hazardous polymerization does not occur.

Avoid

Incompatible products. Keep away from open flames, hot surfaces and sources of ignition.

Incompatible

Strong oxidizing agents, Strong bases

Decomposition

Carbon monoxide (CO), Carbon dioxide (CO2), Hydrogen chloride gas

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1993
Shipping Name
FLAMMABLE LIQUID, N.O.S.
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 2,3-Dichlorobutane?

The signal word is danger.

What is the physical form of 2,3-Dichlorobutane?

2,3-Dichlorobutane is a liquid appearing as light yellow with light yellow color. It has no information available odor.

What is the solubility of 2,3-Dichlorobutane?

No information available

What is 2,3-Dichlorobutane used for?

Laboratory chemicals.

What are the hazard statements for 2,3-Dichlorobutane?

This substance has 3 hazard statements:

  • H225: Highly flammable liquid and vapor
  • H302: Harmful if swallowed
  • H317: May cause an allergic skin reaction

What is the melting point of 2,3-Dichlorobutane?

The melting point is -80 °C / -112 °F and the boiling point is 117 - 119 °C / 242.6 - 246.2 °F.