Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Hexyl alcohol
- Product Code
- AC433860000, AC433860010, AC433861000
- Synonyms
- 1-Hexanol
Regulatory Identifiers
- CAS Number
- 111-27-3 Check regulations →
Identified Uses
Laboratory chemicals.
Uses advised against
Food, drug, pesticide or biocidal product use.
Manufacturers & Suppliers
Fisher Scientific Company
manufacturer
One Reagent Lane, Fair Lawn, NJ 07410
(201) 796-7100
Acros Organics
manufacturer
One Reagent Lane, Fair Lawn, NJ 07410
Emergency Contacts
Emergency Contact
001-800-227-6701
Emergency Contact
+32 14 57 52 11
Emergency Contact
001-201-796-7100
Emergency Contact
+32 14 57 52 99
CHEMTREC
001-800-424-9300
CHEMTREC
001-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| n-Hexanol | 111-27-3 | 95% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If breathing is difficult, give oxygen. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Get medical attention.
Wash off immediately with plenty of water for at least 15 minutes. Get medical attention.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Do NOT induce vomiting. Call a physician or poison control center immediately.
Immediate Medical Attention
Get medical attention.
Medical Treatment
Treat symptomatically
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, carbon dioxide (CO2), dry chemical, alcohol-resistant foam. Water mist may be used to cool closed containers.
No information available
Flammable. Risk of ignition. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Containers may explode when heated. Thermal decomposition can lead to release of irritating gases and vapors.
Keep product and empty container away from heat and sources of ignition.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid release to the environment. See Section 12 for additional Ecological Information.
Soak up with inert absorbent material. Keep in suitable, closed containers for disposal. Use spark-proof tools and explosion-proof equipment.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment/face protection. Do not get in eyes, on skin, or on clothing. Do not breathe mist/vapors/spray. Do not ingest. If swallowed then seek immediate medical assistance.
Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from heat, sparks and flame. Flammables area.
Keep away from open flames, hot surfaces and sources of ignition. Use spark-proof tools and explosion-proof equipment. Take precautionary measures against static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas. Use explosion-proof electrical/ventilating/lighting equipment. Ensure that eyewash stations and safety showers are close to the workstation location.
Wear appropriate protective gloves to prevent skin exposure.
Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Tight sealing safety goggles. Face protection shield.
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Recommended Filter type: Organic gases and vapours filter. Type A. Brown. conforming to EN14387.
Wear appropriate protective clothing to prevent skin exposure.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None known, based on information available
None under normal processing.
Incompatible products. Excess heat. Keep away from open flames, hot surfaces and sources of ignition. Protect from direct sunlight.
Strong oxidizing agents, Strong acids
Carbon monoxide (CO), Carbon dioxide (CO₂)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2282
- Shipping Name
- HEXANOLS
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Hexyl alcohol known by?
Hexyl alcohol is also known as: 1-Hexanol
What is the hazard signal word for Hexyl alcohol?
The signal word is warning.
What is the physical form of Hexyl alcohol?
Hexyl alcohol is a liquid appearing as liquid, colorless with colorless color. It has sweet odor.
What is Hexyl alcohol used for?
Laboratory chemicals.
What are the hazard statements for Hexyl alcohol?
This substance has 3 hazard statements:
- H226: Flammable liquid and vapor
- H302 + H312: Harmful if swallowed or in contact with skin
- H319: Causes serious eye irritation
What is the melting point of Hexyl alcohol?
The melting point is -52 °C / -61.6 °F and the boiling point is 156 - 157 °C / 312.8 - 314.6 °F.