Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Methyl 4-amino-2-bromobenzoate
- Product Code
- BD246332
- Chemical Name
- Methyl 4-amino-2-bromobenzoate
Regulatory Identifiers
- CAS Number
- 98545-64-3 Check regulations →
Identified Uses
For laboratory research purposes. Not for drug or household use.
Uses advised against
No Information available
Manufacturers & Suppliers
BLD Pharmatech GmbH
manufacturer
Senefelder-Ring 27, 21465 Reinbek, Germany.
+49 (0)4055 822 764 0
Emergency Contacts
Emergency Contact
1-352-323-3500
Emergency Contact
0800 1812924
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Methyl 4-amino-2-bromobenzoate | 98545-64-3 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. Get medical attention if symptoms occur.
Wash off immediately with plenty of water for at least 15 minutes. If skin irritation persists, call a physician.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Clean mouth with water and drink afterwards plenty of water. Get medical attention if symptoms occur.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
No information available.
Thermal decomposition can lead to release of irritating gases and vapors.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Use personal protective equipment.
Should not be released into the environment.
Sweep up or vacuum up spillage and collect in suitable container for disposal.
Related Products
Similar products with comparable safety profiles
Methyl 4-hydroxybenzoate
CAS: 99-76-3
Ethyl 4-(dimethylamino)benzoate
CAS: 10287-53-3
Methyl benzoate
CAS: 93-58-3
Methyl benzoate
CAS: 93-58-3
4-Chloro-3-methylbenzoic acid
---
2-(Bromomethyl)benzothiazole
CAS: 106086-78-6
4-Bromo-2-methoxyphenol
CAS: 7368-78-7
Benzyl bromide
CAS: 100-39-0
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment. Ensure adequate ventilation. Do not get in eyes, on skin, or on clothing. Avoid ingestion and inhalation. Avoid dust formation.
Keep container tightly closed in a dry and well-ventilated area. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Keep in dark place, sealed in dry, room temperature
Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not eat, drink or smoke when using this product. Remove and wash contaminated clothing before re-use. Wash hands before breaks and at the end of workday.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas. Ensure that eyewash stations and safety showers are close to the workstation location. Wherever possible, engineering control measures such as the isolation or enclosure of the process, the introduction of process or equipment changes to minimise release or contact, and the use of properly designed ventilation systems, should be adopted to control hazardous materials at source.
Protective gloves. Glove material: Nitrile rubber, Neoprene, Natural rubber, PVC. Breakthrough time: See manufacturers recommendations. EU standard: EN 374. (minimum requirement)
Goggles (European standard - EN 166)
No protective equipment is needed under normal use conditions. Large scale/emergency use: Use a NIOSH/MSHA or European Standard EN 136 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Small scale/Laboratory use: Maintain adequate ventilation
Long sleeved clothing
No information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None known, based on information available
None under normal processing. Hazardous Polymerization: No information available.
No data available
Strong oxidizing agents.
Carbon monoxide , carbon dioxide , hydrogen bromide , nitrogen oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Methyl 4-amino-2-bromobenzoate?
The signal word is warning.
What is the physical form of Methyl 4-amino-2-bromobenzoate?
Methyl 4-amino-2-bromobenzoate is a yellow to brown solid appearing as yellow to brown with yellow to brown color. It has no data available odor.
What is Methyl 4-amino-2-bromobenzoate used for?
For laboratory research purposes. Not for drug or household use.
What are the hazard statements for Methyl 4-amino-2-bromobenzoate?
This substance has 1 hazard statement:
- H302: Harmful if swallowed
What is the melting point of Methyl 4-amino-2-bromobenzoate?
The melting point is No data available and the boiling point is No data available.