Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MTSEAL WIT – ZWART – GRIJS
- Product Code
- D100001 – D100002 – D100003
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesives and/or sealants.
Uses advised against
Not to be used in production of toys or childcare articles.
Manufacturers & Suppliers
MULTITASK INDUSTRIES
manufacturer
KARNEMELKSTRAAT 12, 9060 ZELZATE / BELGIË
+32 (0)9 282 43 61
http://www.multitaskindustries.be
Emergency Contacts
Poison control centre (Brussels)
+32 (0)70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Titanium dioxide EC: 236-675-5 | 13463-67-7 | 0.1 - 1% | Yes |
| Trimethoxyvinylsilane EC: 220-449-8 | 2768-02-7 | 1 - 2.5% | Yes |
| N-(3-(trimethoxysilyl)propyl)ethylenediamine EC: 217-164-6 | 1760-24-3 | 0.1 - 1% | Yes |
| Dioctyltinbis (acetylacetonate) EC: 483-270-6 | 54068-28-9 | 0.1 - 1% | Yes |
| N-[3-(Dimethoxymethylsilyl)propyl]ethylenediamine EC: 221-336-6 | 3069-29-2 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If symptoms persist, call a doctor.
Wash skin with soap and water. In the case of skin irritation or allergic reactions see a doctor.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Call a doctor immediately. Do NOT induce vomiting. Rinse mouth thoroughly with water. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Call a doctor immediately.
Medical Treatment
Small amounts of toxic methanol are released by hydrolysis.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, carbon dioxide (CO2), dry chemical, alcohol-resistant foam.
Full water jet.
Thermal decomposition can lead to release of irritating gases and vapours.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment as required. Ensure adequate ventilation. Do not get in eyes, on skin, or on clothing.
Prevent product from entering drains. Do not allow to enter into soil/subsoil. See Section 12 for additional Ecological Information.
Take up mechanically, placing in appropriate containers for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure adequate ventilation.
Protect from moisture. Keep away from food, drink and animal feeding stuffs.
Do not eat, drink or smoke when using this product. Wash hands before breaks and after work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas.
Wear suitable gloves. Recommended Use: Neoprene™. Nitrile rubber. Butyl rubber. Glove thickness > 0.7mm. The breakthrough time for the mentioned glove material is in general greater than 480 min. Ensure that the breakthrough time of the glove material is not exceeded. Refer to glove supplier for information on breakthrough time for specific gloves. Gloves must conform to standard EN 374
Wear safety glasses with side shields (or goggles). Eye protection must conform to standard EN 166.
In case of inadequate ventilation wear respiratory protection. Wear a respirator conforming to EN 140 with Type A/P2 filter or better. Ensure adequate ventilation, especially in confined areas. Recommended filter type: Organic gases and vapours filter conforming to EN 14387. White. Brown.
None under normal conditions of use.
Do not allow uncontrolled discharge of product into the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Product cures with moisture.
None under normal processing.
Product cures with moisture. Protect from moisture. Exposure to air or moisture over prolonged periods. Do not freeze. Keep away from open flames, hot surfaces and sources of ignition.
None known based on information supplied.
None under normal use conditions. Small amounts of methanol (CAS 67-56-1) are formed by hydrolysis and released upon curing.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MTSEAL WIT – ZWART – GRIJS?
The signal word is no signal word.
What is the physical form of MTSEAL WIT – ZWART – GRIJS?
MTSEAL WIT – ZWART – GRIJS is a solid. appearing as paste. with according to product description. color. It has characteristic. odor.
What is MTSEAL WIT – ZWART – GRIJS used for?
Adhesives and/or sealants.
What is the melting point of MTSEAL WIT – ZWART – GRIJS?
The melting point is No data available. and the boiling point is No data available..