Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Raid® Fly & Wasp Killer
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Biocidal products (e.g. Disinfectants, pest control)
Uses advised against
None identified
Manufacturers & Suppliers
SC Johnson Ltd.
manufacturer
Frimley Green Camberley GU16 7AJ
+441276852000
Emergency Contacts
Consumer Care Center
0800 353 353
Consumer Care Center
1800 409 176
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Isobutane EC: 200-857-2 | 75-28-5 | 20 - 30% | Yes |
| Naphtha (petroleum), hydrotreated heavy EC: 918-481-9 | 64742-48-9 | 10 - 20% | Yes |
| Propane EC: 200-827-9 | 74-98-6 | 5 - 10% | Yes |
| 1R-trans phenothrin | 26046-85-5 | 0.1 - 0.5% | Yes |
| Prallethrin EC: 245-387-9 | 23031-36-9 | 0.1 - 0.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is affected, get medical attention.
Symptoms: Intentional misuse by deliberately concentrating and inhaling contents can be harmful or fatal. No adverse effects expected when used as directed. Excessive exposure to spray mist, fog or vapour may cause respiratory irritation.
Rinse with plenty of water. Get medical attention if irritation develops and persists.
Symptoms: No adverse effects expected when used as directed.
Rinse with plenty of water. Get medical attention if irritation develops and persists.
Symptoms: May irritate eyes. No adverse effects expected when used as directed.
If symptoms persist, call a physician.
Symptoms: No adverse effects expected when used as directed.
Immediate Medical Attention
See Description of first aid measures unless otherwise stated.
Medical Treatment
See Description of first aid measures unless otherwise stated.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
High volume water jet
Heating may cause an explosion. In case of fire and/or explosion do not breathe fumes. Exposure to decomposition products may be a hazard to health.
In the event of fire, wear self-contained breathing apparatus. Wear suitable protective clothing and gloves. Refer to current EN or National standard as appropriate.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus. Wear suitable protective clothing and gloves.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas.
Dike large spills.
Prevent product from entering drains. Do not flush into surface water or sanitary sewer system. Use appropriate containment to avoid environmental contamination.
collect with non-combustible absorbent material, Clean residue from spill site
Materials: non-combustible absorbent material (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
Spectracide® Bug Stop® Flying & Crawling Insect Killer₂
---
Ace Ant, Roach & Spider Killer₃
---
ACTARA® INSECTICIDE
---
OFF!® ACTIVE® INSECT REPELLENT I
---
KARATE® INSECTICIDE
---
Phantom Termiticide-Insecticide
---
ORTHO BUG B-GON LAWN & LANDSCAPE INSECT KILLER READY-TO-SPRAY
---
ROUNDUP® READY-TO-USE WEED & GRASS KILLER III
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not breathe vapours or spray mist. Do not puncture.
Store in cool place. Do not freeze. Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50 °C.
No smoking.
Keep away from sources of ignition - No smoking. Do not spray on a naked flame or any incandescent material. Take measures to prevent the build up of electrostatic charge.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear suitable gloves. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Before removing gloves clean them with soap and water.
No special requirements.
No personal respiratory protective equipment normally required.
Wash contaminated clothing before re-use.
Refer to section 6.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No dangerous reaction known under conditions of normal use.
None known.
Heat, flames and sparks.
None known.
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- UN 1950 AEROSOLS, Flammable,2.1
Limited quantities derogation may be applicable to this product, please check transport documents.
Limited quantities derogation may be applicable to this product, please check transport documents.
Limited quantities derogation may be applicable to this product, please check transport documents.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Raid® Fly & Wasp Killer?
The signal word is danger.
What is the physical form of Raid® Fly & Wasp Killer?
Raid® Fly & Wasp Killer is a aerosol appearing as aerosol with colourless color. It has functional odor.
What is the solubility of Raid® Fly & Wasp Killer?
partly miscible
What is Raid® Fly & Wasp Killer used for?
Biocidal products (e.g. Disinfectants, pest control)
What are the hazard statements for Raid® Fly & Wasp Killer?
This substance has 3 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurized container: May burst if heated.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Raid® Fly & Wasp Killer?
The melting point is no data available and the boiling point is no data available.