NextSDS Logo
Safety Data Sheet EN

CLEANLINE ORIGINAL WASHING UP LIQUID 5L

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
CLEANLINE ORIGINAL WASHING UP LIQUID 5L
Product Code
800-146-4001

Regulatory Identifiers

CAS Number
N/A
UFI Code
7UEV-9RU4-CJ7W-QPUH

Identified Uses

Detergent.

Manufacturers & Suppliers

P

PrimeSource

PO BOX 15247, Birmingham, B23 3HN

+44 (0) 8085 749 312

P

PrimeSource

Unit D9, Horizon Logistics Park, Swords, Co.Dublin, K67 N4T2, Ireland

+353 (0)1 630 1800

Emergency Contacts

Prime Source

01865 407333

NHS Direct

0845 46 47

NHS 24

08454 24 24 24

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Not Classified
Eye Irrit. Cat. 2 H319
Aquatic Chronic Cat. 3 H412

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H319 Causes serious eye irritation.
H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P102 Keep out of reach of children.
P264 Wash contaminated skin thoroughly after handling.
P280 Wear protective gloves.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical advice/ attention.
P501 Dispose of contents/ container in accordance with local regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
C12-14-ALKYL ETHER SULFATES EC: 500-234-8 68891-38-3 1 - 5% Yes
AMINES, C12-14 -ALKYLDIMETHYL, N-OXIDES EC: 931-292-6 308062-28-4 1% Yes
BRONOPOL (INN) EC: 200-143-0 52-51-7 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move affected person to fresh air at once. Rinse nose and mouth with water. Get medical attention if any discomfort continues.

Skin contact

Rinse immediately with plenty of water. Remove contaminated clothing. Get medical attention if irritation persists after washing.

Symptoms: Prolonged contact may cause redness, irritation and dry skin.

Eye contact

Rinse immediately with plenty of water. Remove any contact lenses and open eyelids wide apart. Continue to rinse for at least 15 minutes. Get medical attention if symptoms are severe or persist after washing. Show this Safety Data Sheet to the medical personnel.

Symptoms: The product is irritating to eyes and skin. Prolonged or repeated exposure may cause the following adverse effects: Irritation and redness, followed by blurred vision. Corneal damage. Risk of serious damage to eyes.

Ingestion

Never give anything by mouth to an unconscious person. Do not induce vomiting. Rinse mouth thoroughly with water. Get medical attention if any discomfort continues.

Immediate Medical Attention

Get medical attention if any discomfort continues, if irritation persists, or if symptoms are severe.

Medical Treatment

No specific recommendations.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use fire-extinguishing media suitable for the surrounding fire. Foam, carbon dioxide or dry powder.

Specific hazards

Thermal decomposition or combustion products may include the following substances: Oxides of carbon. Toxic gases or vapours.

Instructions

Control run-off water by containing and keeping it out of sewers and watercourses.

Firefighter Protection

Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Treat the spilled material according to the instructions

Environmental

Collect and dispose of spillage as indicated in Section 13. Do not discharge into drains or watercourses or onto the ground.

Cleanup methods

Absorb in vermiculite, dry sand or earth and place into containers. Flush contaminated area with plenty of water.

Materials: vermiculite, dry sand or earth

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Provide adequate ventilation. Avoid spilling. Avoid contact with skin and eyes. Wear protective clothing as described in Section 8 of this safety data sheet. Avoid breathing vapour/spray. Do not mix with other household chemical products. Do not mix with acid.

Storage

Store in tightly-closed, original container in a dry, cool and well-ventilated place. Store at room temperature. Keep out of the reach of children. Keep away from heat, hot surfaces, sparks,

Hygiene

Good personal hygiene procedures should be implemented. Do not eat, drink or smoke when using this product. Wash skin thoroughly after handling. Take off contaminated clothing and wash it before reuse. Use appropriate hand lotion to prevent defatting and cracking of skin.

Fire prevention

Keep away from heat, hot surfaces, sparks,

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide adequate ventilation.

Hands

Chemical-resistant, impervious gloves complying with an approved standard should be worn if a risk assessment indicates skin contact is possible. It is recommended that gloves are made of the following material: Polyvinyl chloride (PVC). Rubber (natural, latex). Neoprene. Nitrile rubber. Polyethylene. To protect hands from chemicals, gloves should comply with European Standard EN374.

Eyes

Eyewear complying with an approved standard should be worn if a risk assessment indicates eye contact is possible. Unless the assessment indicates a higher degree of protection is required, the following protection should be worn: Tight-fitting safety glasses. Personal protective equipment for eye and face protection should comply with European Standard EN166.

Respiratory

Respiratory protection not required.

Skin/Body

Wear appropriate clothing to prevent repeated or prolonged skin contact. Use appropriate hand lotion to prevent defatting and cracking of skin.

Environmental

Avoid releasing into the environment.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Ph
pH (concentrated solution): 7.5
Metal Corrosion
---
Flammability
---
Vapor Pressure
---
Physical State Data
liquid
Crystallisation Point
---
Softening Point
---
Properties Status
---
Solubility In Water
Soluble in water.
Partition Coefficient
---
Bulk Density
---
Kinematic Viscosity
---
Appearance
Liquid.
Vapor Density
---
State Under Standard Conditions
---
Solubility In Fat
---
Colour Intensity
---
Colour
Green.
Odor Threshold
Not applicable.
Physical State
Liquid
Density
---
Upper Explosive Limit
---
Boiling Point
---
Solidification Point
---
Freezing Point
---
Solubility
Soluble in water.
Decomposition Temperature
---
Flash Point
---
Form
---
Voc Content
---
Molecular Weight
---
Evaporation Rate
---
Lower Explosive Limit
---
Relative Density
1.015 @ 20°C
Auto Ignition Temperature
---
Odor
Perfumed.
Dynamic Viscosity
---
Cloud Point
---
Explosive Limits
---
Relative Evaporation Rate
---
Melting Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal ambient temperatures.

Reactivity

There are no known reactivity hazards associated with this product.

Hazardous reactions

Not applicable.

Avoid

Avoid exposure to high temperatures or direct sunlight.

Incompatible

No specific material or group of materials is likely to react with the product to produce a hazardous situation.

Decomposition

No known hazardous decomposition products.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for CLEANLINE ORIGINAL WASHING UP LIQUID 5L?

The signal word is warning.

What is the physical form of CLEANLINE ORIGINAL WASHING UP LIQUID 5L?

CLEANLINE ORIGINAL WASHING UP LIQUID 5L is a liquid appearing as liquid. with green. color. It has perfumed. odor.

What is the solubility of CLEANLINE ORIGINAL WASHING UP LIQUID 5L?

Soluble in water.

What is CLEANLINE ORIGINAL WASHING UP LIQUID 5L used for?

Detergent.

What are the hazard statements for CLEANLINE ORIGINAL WASHING UP LIQUID 5L?

This substance has 2 hazard statements:

  • H319: Causes serious eye irritation.
  • H412: Harmful to aquatic life with long lasting effects.