Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MULTI SPRAY
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Specialised Welding Products Ltd
Unit 1 Farringdon Industrial Centre, Farringdon, Nr. Alton Hampshire, GU34 3DD
(01420) 588180
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Naphtha (petroleum) hydrotreated light EC: 265-151-9 | 64742-49-0 | 20 - 30% | Yes |
| Butane EC: 203-448-7 | 106-97-8 | 10 - 30% | Yes |
| Propane EC: 200-827-9 | 74-98-6 | 10 - 30% | Yes |
| Propan-2-ol EC: 200-661-7 | 67-63-0 | 15 - 20% | Yes |
| White Pigment | --- | 10 - 15% | No |
| Propan-2-one EC: 200-662-2 | 67-64-1 | 5 - 10% | Yes |
| Organic treated silica's EC: 231-545-4 | 7631-86-9 | 5% | No |
The Full Text for all R-Phrases are displayed in Section 16
First Aid Measures
Emergency procedures for chemical exposure incidents
Move the exposed person to fresh air at once. Get medical attention. Provide rest, warmth and fresh air. When breathing is difficult, properly trained personnel may assist affected person by administering oxygen.
Remove affected person from source of contamination. Remove contaminated clothing immediately and wash skin with soap and water. Get medical attention promptly if symptoms occur after washing.
Make sure to remove any contact lenses from the eyes before rinsing. Promptly wash eyes with plenty of water while lifting the eye lids. Continue to rinse for at least 15 minutes and get medical attention.
DO NOT INDUCE VOMITING! NEVER MAKE AN UNCONSCIOUS PERSON VOMIT OR DRINK FLUIDS! If vomiting occurs, keep head low so that stomach content doesn't get into the lungs. Drink plenty of water. Get medical attention immediately. Provide rest and, warmth and fresh air.
Immediate Medical Attention
Get medical attention immediately (ingestion), get medical attention (inhalation, eye contact), get medical attention promptly if symptoms occur after washing (skin).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, Carbon Dioxide (C02), Dry Powder.
Water jet.
Fire may produce dense black smoke containing hazardous combustion products (see Section 10).
Firefighter Protection
Self contained breathing apparatus and full protective clothing must be worn in case of fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid discharge into drains, water courses or onto the ground.
Collect spillage in containers, seal securely and deliver for disposal accordingly to local regulations.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat, sparks and open flame. Do not use sparking tools around aerosols. Avoid spilling, skin and eye contact. Ventilate well, avoid breathing vapours and spray mist, for personal protection, see Section 8. Use approved respirator if air contamination is above accepted level. Never apply pressure to the aerosol as it is a pressurised object and may explode if pressure is applied.
Store between 5-25°C in a dry, well ventilated place away from sources of heat, ignition and direct sunlight.
Keep away from heat, sparks and open flame. No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under the recommended storage and handling conditions in Section 7.
Applying heat or pressure to the aerosol may result in explosion And fire. Naked flames, smoking, wet and damp storage conditions and mishandling may also result in explosion and fire.
oxidising agents, strong alkaline/acidic materials
smoke, carbon monoxide, carbon dioxide and oxides of nitrogen
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- Aerosols
- Transport Class
- 2
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MULTI SPRAY?
The signal word is danger.
What is the physical form of MULTI SPRAY?
MULTI SPRAY is a aerosol with white color. It has naphtha/ alcohol odor.
What are the hazard statements for MULTI SPRAY?
This substance has 4 hazard statements:
- H220: Extremely flammable.
- H315: Irritating to skin.
- H336: Vapours may cause drowsiness or dizziness.
- H400: Toxic to the aquatic environment.