Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 3MTM Air Tool Lubricant
- Product Code
- 28828, 20451, 20466, 20467
- Synonyms
- 3MTM Air Tool and Compressor Lubricant
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricating Oil for Tools
Manufacturers & Suppliers
3M
manufacturer
3M Center, St. Paul, MN 55144-1000, USA
1-888-364-3577
Emergency Contacts
Emergency Contact
1-800-364-3577
24 hours
Emergency Contact
(651) 737-6501
24 hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Oil | --- | 85 - 95% | No |
| Lubricants | --- | 5 - 15% | No |
| Petroleum Distillates | --- | 0.1 - 1% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
No need for first aid is anticipated.
No need for first aid is anticipated.
Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing.
Rinse mouth.
Immediate Medical Attention
If signs/symptoms persist, get medical attention. If you feel unwell, get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use a carbon dioxide or dry chemical extinguisher to extinguish.
None inherent in this product.
Firefighter Protection
No special protective actions for fire-fighters are anticipated.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate area. Ventilate the area with fresh air.
For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice.
Avoid release to the environment.
Mix in sufficient absorbent until it appears dry. Collect as much of the spilled material as possible. Clean up residue with an appropriate solvent selected by a qualified and authorized person.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Avoid contact with oxidizing agents (eg. chlorine, chromic acid etc.)
Store away from heat. Store away from acids. Store away from oxidizing agents.
Do not eat, drink or smoke when using this product. Wash thoroughly after handling.
Store away from heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapors/spray. If ventilation is not adequate, use respiratory protection equipment.
No chemical protective gloves are required.
None required.
None required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable.
This material is considered to be non reactive under normal use conditions.
Hazardous polymerization will not occur.
Sparks and/or flames
Strong oxidizing agents, Reducing agents, Strong acids
None known. Refer to section 5.2 for hazardous decomposition products during combustion.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is 3MTM Air Tool Lubricant known by?
3MTM Air Tool Lubricant is also known as: 3MTM Air Tool and Compressor Lubricant
What is the hazard signal word for 3MTM Air Tool Lubricant?
The signal word is no signal word.
What is the physical form of 3MTM Air Tool Lubricant?
3MTM Air Tool Lubricant is a liquid appearing as mild petroleum odor, clear light amber liquid with clear light amber color. It has mild petroleum odor odor.
What is 3MTM Air Tool Lubricant used for?
Lubricating Oil for Tools
What is the melting point of 3MTM Air Tool Lubricant?
The melting point is Not Applicable and the boiling point is 230 °C.