Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 3M™ Air Tool Lubricant
- Product Code
- 23-4623-7
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Tool Lubricant
Manufacturers & Suppliers
3M
manufacturer
3M Center, St. Paul, MN 55144-1000
Emergency Contacts
Emergency Contact
1-800-364-3577
24 hours
Emergency Contact
(651) 737-6501
24 hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Petroleum Based Oil | --- | 85 - 95% | No |
| Lubricating Oils | --- | 5 - 10% | No |
| Sulphide Additive | --- | 0.5 - 5% | No |
| Wax Additive | --- | 1 - 3% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
No need for first aid is anticipated.
Wash affected area with soap and water.
Flush eyes with large amounts of water.
Do not induce vomiting unless instructed to do so by medical personnel. Give victim two glasses of water. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
If signs/symptoms persist, get medical attention (Eye Contact). If signs/symptoms develop, get medical attention (Skin Contact). Get medical attention (If Swallowed).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire extinguishers with class A extinguishing agents (e.g., water, foam).
Unusual Fire and Explosion Hazards: Not applicable. None inherent in this product.
Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus (SCBA).
Firefighter Protection
Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus (SCBA).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Collect the resulting residue containing solution. Place in a closed container approved for transportation by appropriate authorities.
Collect as much of the spilled material as possible.
Related Products
Similar products with comparable safety profiles
3MTM Air Tool Lubricant
---
Air Tool Lubricant
---
Marvel Air Tool Oil
---
MS Lubricant
---
LUBE-MATIC® Wire Kleener and Lubricant - 3.75 oz
---
690 FG Lubricant (Aerosol)
---
Starrett M-1 All Purpose Lubricant Low VOC AEROSOL
---
CompAir Fluid Force 2000hr Universal Screw Lubricant
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Avoid prolonged or repeated skin contact.
Store in a cool place. Keep container in well-ventilated area.
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.
Store away from heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Gloves not normally required.
Avoid eye contact. To minimize the risk of injury to face and eyes, always wear eye and face protection when working at sanding or grinding operations or when near such operations.
Under normal use conditions, airborne exposures are not expected to be significant enough to require respiratory protection.
Avoid prolonged or repeated skin contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Hazardous polymerization will not occur.
Sparks and/or flames
Strong oxidizing agents, Reducing agents, Strong acids
Carbon monoxide, Carbon dioxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 3M™ Air Tool Lubricant?
The signal word is no signal word.
What is the physical form of 3M™ Air Tool Lubricant?
3M™ Air Tool Lubricant is a liquid appearing as clear light amber liquid with clear light amber color. It has mild petroleum odor odor.
What is 3M™ Air Tool Lubricant used for?
Tool Lubricant
What is the melting point of 3M™ Air Tool Lubricant?
The melting point is Not Applicable and the boiling point is 230 °C.