Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BALTECH P6413 TECHNICAL ETHANOL
- Chemical Name
- ethanol
Regulatory Identifiers
- CAS Number
- 64-17-5 Check regulations →
- EC Number
- 200-578-6 Check regulations →
- REACH No.
- 01-2119457610-43
Identified Uses
Thinner for ethanol-based paints, special solvent, cleaning agent, fuel.
Uses advised against
The product should not be used in ways other then those referred in Section 1.
Manufacturers & Suppliers
BARVY A LAKY TELURIA,s.r.o.
distributor
č.p.1, Skrchov, 679 61 Czech Republic
+420 516 474 211
http://www.bal.cz
Emergency Contacts
Emergency Contact
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Terminate the exposure immediately; move the affected person to fresh air. Protect the person against growing cold. Provide medical treatment if irritation, dyspnoea or other symptoms persist.
Symptoms: Not expected.
Remove contaminated clothes. Wash the affected area with plenty of water, lukewarm if possible. Soap, soap solution or shampoo should be used if there is no skin injury. Provide medical treatment if skin irritation persists. Rinse skin with water or shower.
Symptoms: Not expected.
Rinse eyes immediately with a flow of running water, open the eyelids (also using force if needed); remove contact lenses immediately if worn by the affected person. Rinsing should continue at least for 10 minutes. Provide medical treatment, specialized if possible.
Symptoms: Causes serious eye irritation.
Rinse out the mouth with water and provide 2-5 dL of water. Provide medical treatment if the person has any health problems.
Symptoms: Irritation, nausea.
Immediate Medical Attention
If you see a doctor, take this safety data sheet with you.
Medical Treatment
Symptomatic treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol-resistant foam, carbon dioxide, powder, water spray jet, water mist.
Water - full jet.
In the event of fire, carbon monoxide, carbon dioxide and other toxic gases may arise. Inhalation of hazardous degradation (pyrolysis) products may cause serious health damage.
Closed containers with the product near the fire should be cooled with water.
Firefighter Protection
Self-Contained Breathing Apparatus (SCBA) with a chemical protection suit only where personal (close) contact is likely. Use a self-contained breathing apparatus and full-body protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid inhalation of vapour, prevent skin and eye contact. In closed spaces, ensure fresh air supply. Eliminate all ignition sources. No smoking and no open fire. Keep unnecessary personnel away.
In the event of leakage of the substantial amount of the product, inform fire brigade and other competent bodies.
Prevent contamination of the soil and entering surface or ground water. If possible prevent leakage, close container and place damaged container in protective container.
After removal of the product, wash the contaminated site with plenty of water. Do not use solvents.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use the product after due familiarization with its hazard characteristics and proper training. Do not eat, drink, or smoke on the site. Wash hands and other contaminated parts of the body with soap and water before eating and after the use of the product is finished. Use recommended personal protective equipment listed in 8.2. Keep protective clothing and equipment clean and sound.
Store the product in properly marked, closed containers in well ventilated spaces at 5 – 25 °C.
Do not eat, drink, or smoke on the site. Wash your hands and other contaminated parts of the body with soap and water before eating and after the use of the product is finished. Abide by requirements on personal hygiene when working with hazardous chemical products.
Prevent potential ignition or explosion of the mixture of product vapour and air caused by contact with open flame, sparks, extremely hot surfaces, or electrostatic discharges. Do not smoke on the site, use nonsparking tools.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Overall and local ventilation, effective extraction.
Protective gloves resistant to the product.
Protective goggles or face shield (based on the nature of the work performed).
Halfmask with a filter against organic vapours or a self-contained breathing apparatus as appropriate if exposure limit values of substances are exceeded or in a poorly ventilated environment.
Contaminated skin should be washed thoroughly.
Observe usual measures for protection of the environment, see Section 6.2. Ensure that containers are properly closed during storage, handling and transport. Secure storage areas against possible leakage of product into the environment (sewerage, water, soil - see 6.2). Do not flush product into drains or watercourses.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is volatile and evaporates under standard temperature and pressure. It is stable when stored and handled under standard ambient conditions.
When used in the standard way, there is not any dangerous reaction with other substances.
No known dangerous reactions when used under standard conditions. Flammable liquid. Vapours may form explosive mixture with air. Vapours are heavier than air, accumulate near the ground and below ground, and the fire can spread over long distances.
Protect against flames, sparks, overheating and against frost.
strong acids, bases and oxidizing agents
Not developed under normal uses. Dangerous outcomes such as carbon monoxide and carbon dioxide are formed at high temperature and in fire.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1170
- Shipping Name
- ETHANOL SOLUTION
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BALTECH P6413 TECHNICAL ETHANOL?
The signal word is danger.
What is the physical form of BALTECH P6413 TECHNICAL ETHANOL?
BALTECH P6413 TECHNICAL ETHANOL is a liquid with colourless color. It has containing alcohol odor.
What is BALTECH P6413 TECHNICAL ETHANOL used for?
Thinner for ethanol-based paints, special solvent, cleaning agent, fuel.
What are the hazard statements for BALTECH P6413 TECHNICAL ETHANOL?
This substance has 2 hazard statements:
- H225: Highly flammable liquid and vapour.
- H319: Causes serious eye irritation.
What is the melting point of BALTECH P6413 TECHNICAL ETHANOL?
The melting point is data not available and the boiling point is 78-83 °C.