NextSDS Logo
Safety Data Sheet EN

PRO 1-GL 2PK GLOSS ROYAL BLUE

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
PRO 1-GL 2PK GLOSS ROYAL BLUE
Product Code
7727402

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Topcoat/Alkyd

Manufacturers & Suppliers

R

Rust-Oleum Corporation

manufacturer

11 Hawthorn Parkway, Vernon Hills, IL 60061, USA

R

Rust-Oleum Corporation

national supplier

11 Hawthorn Parkway, Vernon Hills, IL 60061, USA

Emergency Contacts

Emergency Contact

847-367-7700

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Carc. Cat. 1B H350
Flam. Liq. Cat. 3 H226
Muta. Cat. 1B H340
Skin Sens. Cat. 1 H317

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H226 Flammable liquid and vapor.
H317 May cause an allergic skin reaction.
H340 May cause genetic defects.
H350 May cause cancer.

Precautionary Statements

P201 Obtain special instructions before use.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. NO SMOKING.
P233 Keep container tightly closed.
P240 Ground/bond container and receiving equipment.
P241 Use explosion-proof electrical/ventilating/lighting/equipment.
P242 Use only non-sparking tools.
P243 Take precautionary measures against static discharge.
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P308 + P313 IF exposed or concerned: Get medical advice/attention.
P321 For specific treatment see label.
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
P363 Wash contaminated clothing before reuse.
P370 + P378 In case of fire: Use alcohol film forming foam, carbon dioxide, dry chemical, dry sand to extinguish.
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local, regional and national regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Hydrotreated Light Distillate 64742-47-8 25 - 50% Yes
Titanium Dioxide 1317-80-2 1 - 2.5% No
Titanium Dioxide 13463-67-7 1 - 2.5% No
Xylenes (o-, m-, p- Isomers) 1330-20-7 0.1 - 1% Yes
Methyl Ethyl Ketoxime 96-29-7 0.1 - 1% Yes
Ethylbenzene 100-41-4 0.1 - 1% Yes
Naphtha, Hydrotreated Heavy 64742-48-9 0.1 - 1% Yes
Cobalt 2-Ethylhexanoate 136-52-7 0.1 - 1% No
Zirconium Acetate 5153-24-2 0.1% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation. If you experience difficulty in breathing, leave the area to obtain fresh air.

Symptoms: difficulty in breathing

Skin contact

Wash skin with soap and water. Remove contaminated clothing.

Symptoms: irritation

Eye contact

Immediately flush eyes with plenty of water for at least 15 minutes holding eyelids open. Do NOT allow rubbing of eyes or keeping eyes closed.

Ingestion

Do not induce vomiting or give anything by mouth. If swallowed, get medical attention.

Symptoms: Aspiration hazard

Immediate Medical Attention

Get medical attention (Eyes). Get medical attention if irritation develops or persists (Skin). Get immediate medical attention (Inhalation). Get immediate medical attention (Ingestion).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Alcohol Film Forming Foam, Carbon Dioxide, Dry Chemical, Water Fog

Specific hazards

Closed containers may explode when exposed to extreme heat due to buildup of steam. Keep containers tightly closed. Combustible liquid and vapor. No unusual fire or explosion hazards noted.

Instructions

Water may be used to cool closed containers to prevent pressure buildup and possible autoignition or explosion. Evacuate area and fight fire from a safe distance. Use water spray to keep fire-exposed containers cool. Containers may explode when heated.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Contain spilled liquid with sand or earth. DO NOT use combustible materials such as sawdust. Remove all sources of ignition, ventilate area and remove with inert absorbent and nonsparking tools.

Cleanup methods

remove with inert absorbent and nonsparking tools

Materials: inert absorbent

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wash thoroughly after handling. Wash hands before eating. Remove contaminated clothing and launder before reuse. Use only with adequate ventilation. Follow all SDS and label precautions even after container is emptied because it may retain product residues. Avoid breathing fumes, vapors, or mist. Avoid contact with eyes, skin and clothing. Avoid contact with eyes.

Storage

Store in a dry, well ventilated place. Keep container tightly closed when not in use. Avoid excess heat.

Hygiene

Wash thoroughly after handling. Wash hands before eating. Remove contaminated clothing and launder before reuse.

Fire prevention

Isolate from heat, electrical equipment, sparks and open flame. Keep away from heat, sparks, flame and sources of ignition.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Decomposition Temperature
N.D.
Solubility In Water
Negligible
Freezing Point
ND
Crystallisation Point
---
Solubility In Fat
---
Properties Status
---
Vapor Pressure
N.D.
Vapor Density
---
Odor
Solvent Like
Form
---
Melting Point
---
Dynamic Viscosity
N.D.
Voc Content
---
Auto Ignition Temperature
N.D.
Boiling Point
136 - 1,649 °C
Appearance
Liquid
Relative Evaporation Rate
---
Upper Explosive Limit
6.6
Partition Coefficient
ND
Flash Point
41 °C
Colour Intensity
---
Density
---
Odor Threshold
N.E.
Evaporation Rate
Slower than Ether
Kinematic Viscosity
---
Cloud Point
---
Lower Explosive Limit
0.5
Solubility
---
Explosive Limits
---
Colour
---
Softening Point
---
Solidification Point
---
Relative Density
0.934
Physical State Data
liquid
State Under Standard Conditions
---
Bulk Density
---
Flammability
Supports Combustion
Physical State
Liquid
Ph
NE
Metal Corrosion
---
Molecular Weight
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

This product is stable under normal storage conditions.

Hazardous reactions

Will not occur under normal conditions.

Avoid

Avoid all possible sources of ignition.

Incompatible

Incompatible with strong oxidizing agents, strong acids and strong alkalies.

Decomposition

By open flame, carbon monoxide and carbon dioxide. When heated to decomposition, it emits acrid smoke and irritating fumes. Contains solvents which may form carbon monoxide, carbon dioxide, and formaldehyde.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1263
Shipping Name
Paint
Transport Class
3
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for PRO 1-GL 2PK GLOSS ROYAL BLUE?

The signal word is danger.

What is the physical form of PRO 1-GL 2PK GLOSS ROYAL BLUE?

PRO 1-GL 2PK GLOSS ROYAL BLUE is a liquid appearing as liquid . It has solvent like odor.

What is PRO 1-GL 2PK GLOSS ROYAL BLUE used for?

Topcoat/Alkyd

What are the hazard statements for PRO 1-GL 2PK GLOSS ROYAL BLUE?

This substance has 4 hazard statements:

  • H226: Flammable liquid and vapor.
  • H317: May cause an allergic skin reaction.
  • H340: May cause genetic defects.
  • H350: May cause cancer.