Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PRO 1-GL 2PK SAFETY YELLOW
- Product Code
- 7543402
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Topcoat/Alkyd
Manufacturers & Suppliers
Rust-Oleum Corporation
manufacturer
11 Hawthorn Parkway, Vernon Hills, IL 60061, USA
Rust-Oleum Corporation
national supplier
11 Hawthorn Parkway, Vernon Hills, IL 60061, USA
Emergency Contacts
24 Hour Hotline
847-367-7700
24 Hour
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrotreated Light Distillate | 64742-47-8 | 25 - 50% | Yes |
| Titanium Dioxide | 13463-67-7 | 2.5 - 10% | No |
| Pigment Yellow 74 | 6358-31-2 | 2.5 - 10% | No |
| Yellow Iron Oxide | 51274-00-1 | 1 - 2.5% | No |
| Xylenes (o-, m-, p- Isomers) | 1330-20-7 | 0.1 - 1% | Yes |
| Methyl Ethyl Ketoxime | 96-29-7 | 0.1 - 1% | Yes |
| Ethylbenzene | 100-41-4 | 0.1 - 1% | Yes |
| Naphtha, Hydrotreated Heavy | 64742-48-9 | 0.1 - 1% | Yes |
| Cobalt 2-Ethylhexanoate | 136-52-7 | 0.1 - 1% | No |
| Zirconium Acetate | 5153-24-2 | 0.1% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical attention. Do NOT use mouth-to-mouth resuscitation. If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately.
Wash skin with soap and water. Remove contaminated clothing. Get medical attention if irritation develops or persists.
Immediately flush eyes with plenty of water for at least 15 minutes holding eyelids open. Get medical attention. Do NOT allow rubbing of eyes or keeping eyes closed.
If swallowed, get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol Film Forming Foam, Carbon Dioxide, Dry Chemical, Dry Sand, Water Fog
Closed containers may explode when exposed to extreme heat due to buildup of steam. Keep containers tightly closed. Combustible liquid and vapor. No unusual fire or explosion hazards noted.
Evacuate area and fight fire from a safe distance. Use water spray to keep fire-exposed containers cool. Containers may explode when heated.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove all sources of ignition, ventilate area and remove with inert absorbent and non-sparking tools.
remove with inert absorbent and non-sparking tools
Materials: inert absorbent
Related Products
Similar products with comparable safety profiles
ICWB LSPR 12PK HI VISABL YELLOW MARKING
---
KRYLON® OSHA Colors Safety Orange
---
SIGMACOVER 295 BASE YELLOW/GREEN
---
ACE® RUST STOP Protective Enamel Safety Colors Safety Yellow Gloss
---
PROFIN 1-GL 4PK WB POLY 275VOC GLOSS
---
COLORMARK LINEMARKER YELLOW 500 ML
---
DP-LUBRICANT YELLOW
---
MARKER PEN - Yellow
UFI: WAHY-R8SH-U00U-1JFG
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash thoroughly after handling. Wash hands before eating. Remove contaminated clothing and launder before reuse. Use only with adequate ventilation. Follow all SDS and label precautions even after container is emptied because it may retain product residues. Avoid breathing fumes, vapors, or mist. Avoid contact with eyes, skin and clothing.
Store in a dry, well ventilated place. Keep container tightly closed when not in use. Keep containers tightly closed. Isolate from heat, electrical equipment, sparks and open flame. Avoid excess heat.
Wash thoroughly after handling. Wash hands before eating. Remove contaminated clothing and launder before reuse.
Isolate from heat, electrical equipment, sparks and open flame. Avoid excess heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits. Prevent build-up of vapors by opening all doors and windows to achieve cross-ventilation. Engineering Measures for Combustible Dust: No Information
Use gloves to prevent prolonged skin contact. Nitrile or Neoprene gloves may afford adequate skin protection.
Use safety eyewear designed to protect against splash of liquids.
A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2 requirements must be followed whenever workplace conditions warrant a respirator's use.
Use gloves to prevent prolonged skin contact. Nitrile or Neoprene gloves may afford adequate skin protection.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This product is stable under normal storage conditions.
Will not occur under normal conditions.
No Information
Incompatible with strong oxidizing agents, strong acids and strong alkalies.
When heated to decomposition, it emits acrid smoke and irritating fumes. Contains solvents which may form carbon monoxide, carbon dioxide, and formaldehyde.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1263
- Shipping Name
- Paint
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PRO 1-GL 2PK SAFETY YELLOW?
The signal word is danger.
What is the physical form of PRO 1-GL 2PK SAFETY YELLOW?
PRO 1-GL 2PK SAFETY YELLOW is a liquid appearing as liquid . It has solvent like odor.
What is PRO 1-GL 2PK SAFETY YELLOW used for?
Topcoat/Alkyd
What are the hazard statements for PRO 1-GL 2PK SAFETY YELLOW?
This substance has 4 hazard statements:
- H226: Flammable liquid and vapor.
- H317: May cause an allergic skin reaction.
- H340: May cause genetic defects.
- H350: May cause cancer.