Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Dimethylamine (ca. 10% in Tetrahydrofuran, ca. 2mol/L)
- Product Code
- D3948
Regulatory Identifiers
- CAS Number
- N/A
- EC Number
- 204-697-4 Check regulations →
Identified Uses
Use as laboratory reagent
Manufacturers & Suppliers
TCI EUROPE N.V.
manufacturer
Boereveldseweg 6 - Haven 1063, B-2070 Zwijndrecht, Belgium
+32 (0)3 735 07 00
Emergency Contacts
Emergency Contact
+44 844 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER or doctor/ physician.
Take off all contaminated clothing immediately. If on skin, rinse well with water. Call a POISON CENTER or doctor/ physician.
Rinse with plenty of water. If easy to do, remove contact lens, if worn. Immediately call a POISON CENTER or doctor/ physician.
Immediately call a POISON CENTER or doctor/ physician. Rinse mouth. Do NOT induce vomiting.
Immediate Medical Attention
Immediately call a POISON CENTER or doctor/ physician.
Medical Treatment
None known.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry powder, Foam, Water spray, Carbon dioxide (CO2)
No information available.
Immediately evacuate personnel to safe areas. Remove undamaged containers from fire area if it is safe to do so.
Firefighter Protection
Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep people away from and upwind of spill/leak. Entry to non-involved personnel should be controlled around the leakage area by roping off, etc.
Prevent product from entering drains.
Collect as much of the spill as possible with a suitable absorbent material.
Related Products
Similar products with comparable safety profiles
Dimethylamine 40% w/v solution in water
UFI: 3JG5-P289-NX0F-K859
Dimethylamine, 1-1.5M in diethyl ether
CAS: 124-40-3
Trimethylamine, 1M solution in THF
CAS: 75-50-3
Methylamine, 40% w/w aqueous solution
---
Methylamine 40 % in water, for synthesis
UFI: Y751-S01M-9003-Y1JV
2-Methyltetrahydrofuran
CAS: 96-47-9
Ethylamine, 2M in THF
CAS: 75-04-7
2-methyltetrahydrofuran
CAS: 96-47-9
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin, eyes and clothing. Wear personal protective equipment. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not subject to grinding, shock or friction. Wash hands and face thoroughly after handling. Confirm in advance if peroxides exist when operations involving heating such as distillation are carried out. Open drum carefully as content may be under pressure.
Keep container tightly closed. Store in a refrigerator. Keep in a well-ventilated place. Use explosion-proof equipment. Keep under inert gas. Store locked up.
Wash hands and face thoroughly after handling.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Take precautionary measures against static discharge.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Install a closed system or local exhaust. Also install safety shower and eye bath.
Impervious gloves
Safety glasses, Safety goggles, Face-shield
Gas mask, Self-contained breathing apparatus
Impervious protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No data available
Reacts with air to form peroxides.
Heat, Electrical spark, Open flame, Electrostatic discharge, Exposure to air.
Oxidizing agents, Acids
Carbon monoxide, Carbon dioxide (CO2), Nitrogen oxides (NOx)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2924
- Shipping Name
- FLAMMABLE LIQUID, CORROSIVE, N.O.S.
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Dimethylamine (ca. 10% in Tetrahydrofuran, ca. 2mol/L)?
The signal word is danger.
What is the physical form of Dimethylamine (ca. 10% in Tetrahydrofuran, ca. 2mol/L)?
Dimethylamine (ca. 10% in Tetrahydrofuran, ca. 2mol/L) is a liquid with colourless - yellow color. It has no data available odor.
What is Dimethylamine (ca. 10% in Tetrahydrofuran, ca. 2mol/L) used for?
Use as laboratory reagent
What are the hazard statements for Dimethylamine (ca. 10% in Tetrahydrofuran, ca. 2mol/L)?
This substance has 9 hazard statements:
- H225: Highly flammable liquid and vapour.
- H302: Harmful if swallowed.
- H314: Causes severe skin burns and eye damage.
- H317: May cause an allergic skin reaction.
- H335: May cause respiratory irritation.
- H351: Suspected of causing cancer.
- H370: Causes damage to organs (Respiratory system, Central nervous system).
- H371: May cause damage to organs (Nervous system).
- H372: Causes damage to organs (Liver, Respiratory system, Nervous system, Kidney) through prolonged or repeated exposure.
What is the melting point of Dimethylamine (ca. 10% in Tetrahydrofuran, ca. 2mol/L)?
The melting point is No data available and the boiling point is No data available.