Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 2-methyltetrahydrofuran
- Product Form
- Substance
- Chemical Name
- Tetrahydro-2-methylfuran
Regulatory Identifiers
- CAS Number
- 96-47-9 Check regulations →
- EC Number
- 202-507-4 Check regulations →
- REACH No.
- 01-2119968920-28-xxxx
Identified Uses
Solvents Chemicals for synthesis
Manufacturers & Suppliers
NOVASOL S.A.
manufacturer
Mechelse Steenweg 455, 1950 Kraainem - Belgium
+32-2-76970-70
Emergency Contacts
Brandweerinformatiecentrum voor gevaarlijke stoffen (B.I.G.)
+32 14 58 45 45
EN, DE, FR, NL
National Health Service (NHS)
111
National Health Service (NHS)
0845 46 47
National Health Service (NHS)
999
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS05
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mono-constituent
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Tetrahydro-2-methylfuran EC: 202-507-4 | 96-47-9 | --- | No |
Full text of H-statements: see section 16
Notes
Full text of H-statements: see section 16
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms: Call a poison center or a doctor.
Symptoms: Cough. Shortness of breath. Irritating to the respiratory system and mucous membranes.
Take off immediately all contaminated clothing. Wash off immediately with soap and plenty of water. If skin irritation occurs: Get medical advice/attention.
Symptoms: Irritation.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a physician immediately.
Symptoms: Serious damage to eyes.
Rinse mouth. Drink plenty of water. Get immediate medical advice/attention. Do not induce vomiting. Vomiting: prevent asphyxia/aspiration pneumonia. Do not give an unconscious person anything to drink. If unconscious, place in the recovery position and seek medical advice.
Immediate Medical Attention
Get immediate medical advice/attention (for ingestion). Call a physician immediately (for eye contact). Call a poison center or a doctor if experiencing respiratory symptoms.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry powder. Foam. Carbon dioxide.
Water.
Highly flammable liquid and vapour. Vapours are heavier than air.
Protect container with water spray.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate spillage area. No open flames, no sparks, and no smoking. Avoid contact with skin and eyes.
Avoid sub-soil penetration. Prevent entry to sewers and public waters.
Take up mechanically (sweeping, shovelling) and collect in suitable container for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation of the work station. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground/bond container and receiving equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Flammable vapours may accumulate in the container. Use explosion-proof equipment. Wear personal protective equipment. Avoid contact with skin and eyes.
Store in a well-ventilated place. Keep cool. Keep container tightly closed. Protect from light. Keep away from : Oxygen.
Wash contaminated clothing before reuse. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground/bond container and receiving equipment. Use only non-sparking tools. Take precautionary measures against static discharge.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Chemically resistant protective gloves. EN 374. Choosing the proper glove is a decision that depends not only on the type of material, but also on other quality features, which differ for each manufacturer. Please follow the instructions related to the permeability and the penetration time provided by the manufacturer. Gloves must be replaced after each use and whenever signs of wear or perforation appear. Do not use: Fluoroelastomer (FKM), Nitrile rubber, Natural rubber. Type: Chemically resistant protective gloves, Material: Butyl rubber, Permeation: 1 (> 10 minutes), Thickness (mm): 0,7, Standard: EN 374
Wear closed safety glasses. EN 166. Emergency eye wash fountains should be available in the immediate vicinity of any potential exposure
In case of insufficient ventilation, wear suitable respiratory equipment. Breathing apparatus with filter. EN 14387. Filter type: A
Wear suitable protective clothing
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions. May form explosive peroxides.
Highly flammable liquid and vapour.
No dangerous reactions known under normal conditions of use. Peroxides may be formed on prolonged contact with air.
Avoid contact with hot surfaces. Heat. No flames, no sparks. Eliminate all sources of ignition.
Oxidizing agent. Strong acids. Strong bases. air or oxygen.
Under normal conditions of storage and use, hazardous decomposition products should not be produced. May form explosive peroxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
Not classified for acute or chronic aquatic toxicity.
12.1. Toxicity
12.2. Persistence and degradability
12.2. Persistence and degradability
Product is practically not biodegradable.
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
Based on the n-octanol/water partition coefficient accumulation in organisms is not expected.
12.5. Results of PBT and vPvB assessment
The substance does not meet the PBT or vPvB criteria of REACH regulation, annex XIII.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal must be done according to official regulations.
Do not dispose of with domestic waste.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2536
- Shipping Name
- METHYL TETRAHYDROF URAN
- Transport Class
- 3
- Packing Group
- II
No supplementary information available
PCA Excepted quantities (IATA) : E2 PCA Limited quantities (IATA) : Y341 PCA packing instructions (IATA) : 353
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Take note of Directive 94/33/EC on the protection of young people at work.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 2-methyltetrahydrofuran?
The signal word is danger.
What is the physical form of 2-methyltetrahydrofuran?
2-methyltetrahydrofuran is a liquid appearing as clear. with colourless. color. It has no data available odor.
What is the solubility of 2-methyltetrahydrofuran?
Water: ≈ 140 g/l
What is 2-methyltetrahydrofuran used for?
Solvents Chemicals for synthesis
What are the hazard statements for 2-methyltetrahydrofuran?
This substance has 4 hazard statements:
- H225: Highly flammable liquid and vapour.
- H302: Harmful if swallowed.
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
What is the melting point of 2-methyltetrahydrofuran?
The melting point is Not applicable and the boiling point is 78 °C (1013 hPa).