BrettPhos

If fumes, aerosols or combustion products are inhaled remove from contaminated area. Other measures are usually unnecessary.

If skin or hair contact occurs: Flush skin and hair with running water (and soap if available). Seek medical attention in event of irritation.

Wash out immediately with fresh running water. Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by occasionally lifting the upper and lower lids. Seek medical attention without delay; if pain persists or recurs seek medical attention. Removal of contact lenses after an eye injury should only be undertaken by skilled personnel.

Immediately give a glass of water. First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor.

Use extinguishing media suitable for surrounding area.

There is no restriction on the type of extinguisher which may be used.

Not considered a significant fire risk, however containers may burn. May emit corrosive fumes.

Alert Fire Brigade and tell them location and nature of hazard. Prevent, by any means available, spillage from entering drains or water courses. Use fire fighting procedures suitable for surrounding area. DO NOT approach containers suspected to be hot. Cool fire exposed containers with water spray from a protected location. If safe to do so, remove containers from path of fire.

Minor Spills: Clean up all spills immediately. Avoid breathing dust and contact with skin and eyes. Wear protective clothing, gloves, safety glasses and dust respirator. Use dry clean up procedures and avoid generating dust. Sweep up, shovel up or Vacuum up (consider explosion-proof machines designed to be grounded during storage and use). Place spilled material in clean, dry, sealable, labelled container. Major Spills: Moderate hazard. CAUTION: Advise personnel in area. Alert Emergency Services and tell them location and nature of hazard. Control personal contact by wearing protective clothing. Prevent, by any means available, spillage from entering drains or water courses. Recover product wherever possible. IF DRY: Use dry clean up procedures and avoid generating dust. Collect residues and place in sealed plastic bags or other containers for disposal. IF WET: Vacuum/shovel up and place in labelled containers for disposal.

Clean up all spills immediately. Avoid breathing dust and contact with skin and eyes. Wear protective clothing, gloves, safety glasses and dust respirator. Use dry clean up procedures and avoid generating dust. Sweep up, shovel up or Vacuum up (consider explosion-proof machines designed to be grounded during storage and use). Place spilled material in clean, dry, sealable, labelled container.

Moderate hazard. CAUTION: Advise personnel in area. Alert Emergency Services and tell them location and nature of hazard. Control personal contact by wearing protective clothing. Prevent, by any means available, spillage from entering drains or water courses. Recover product wherever possible. IF DRY: Use dry clean up procedures and avoid generating dust. Collect residues and place in sealed plastic bags or other containers for disposal. IF WET: Vacuum/shovel up and place in labelled containers for disposal.

Prevent, by any means available, spillage from entering drains or water courses. If contamination of drains or waterways occurs, advise Emergency Services.

Sweep up, shovel up or Vacuum up. Wash area down with large amounts of water.

Materials: clean, dry, sealable, labelled container, sealed plastic bags

Avoid all personal contact, including inhalation. Wear protective clothing when risk of exposure occurs. Use in a well-ventilated area. Prevent concentration in hollows and sumps. DO NOT enter confined spaces until atmosphere has been checked. DO NOT allow material to contact humans, exposed food or food utensils. Avoid contact with incompatible materials. When handling, DO NOT eat, drink or smoke. Keep containers securely sealed when not in use. Avoid physical damage to containers. Always wash hands with soap and water after handling. Work clothes should be laundered separately. Launder contaminated clothing before re-use. Use good occupational work practice. Observe manufacturer's storage and handling recommendations contained within this SDS. Atmosphere should be regularly checked against established exposure standards to ensure safe working conditions are maintained.

Store in original containers. Keep containers securely sealed. Store in a cool, dry area protected from environmental extremes. Store away from incompatible materials and foodstuff containers. Protect containers against physical damage and check regularly for leaks.

When handling, DO NOT eat, drink or smoke. Always wash hands with soap and water after handling. Work clothes should be laundered separately. Launder contaminated clothing before re-use.

Engineering controls are used to remove a hazard or place a barrier between the worker and the hazard. Process controls which involve changing the way a job activity or process is done to reduce the risk. Enclosure and/or isolation of emission source. Local exhaust ventilation is required where solids are handled as powders or crystals.

Select gloves tested to a relevant standard (e.g. Europe EN 374, US F739, AS/NZS 2161.1 or national equivalent). For prolonged or frequently repeated contact, a glove with a protection class of 5 or higher (breakthrough time > 240 minutes) is recommended. For brief contact, a glove with a protection class of 3 or higher (breakthrough time > 60 minutes) is recommended. For general applications, gloves with a thickness typically greater than 0.35 mm are recommended. Suitable polymers: polychloroprene, nitrile rubber, butyl rubber, fluorocaoutchouc, polyvinyl chloride.

Safety glasses with side shields. Chemical goggles. [AS/NZS 1337.1, EN166 or national equivalent].

Type -P Filter of sufficient capacity. (AS/NZS 1716 & 1715, EN 143:2000 & 149:2001, ANSI Z88 or national equivalent). Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN143) dust masks. Use approved positive flow mask if significant quantities of dust becomes airborne.

Overalls. P.V.C apron.

Product is considered stable and hazardous polymerisation will not occur.

See section 7

See section 7

See section 7

See section 7

See section 5