Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Alfa Phos
- Product Code
- 3180126125, 3180126171, 3180126192
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial cleaner
Manufacturers & Suppliers
Alfa Laval Technologies AB
manufacturer
SE-221 00 Lund, Sweden
+46 46 36 65 00
http://www.alfalaval.com
Emergency Contacts
Emergency Contact
999
NHS direct
111
24h
Emergency Contact
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| phosphoric acid EC: 231-633-2 | 7664-38-2 | 60 - 75% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor if symptoms persist.
Immediately rinse with water. If skin irritation continues, consult a doctor.
Symptoms: severe skin burns
Rinse cautiously with water for 20 minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Symptoms: eye damage
Rinse out mouth and then drink plenty of water. Do not induce vomiting; call for medical help immediately.
Immediate Medical Attention
Call a doctor immediately.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire extinguishing methods suitable to surrounding conditions.
Not applicable.
Formation of toxic gases is possible during heating or in case of fire.
Firefighter Protection
Wear self-contained respiratory protective device. Wear fully protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Wear protective equipment. Keep unprotected persons away. Do not breathe vapour. Do not get in eyes, on skin, or on clothing.
Do not allow to enter sewers/ surface or ground water. Send for recovery or disposal in suitable receptacles.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
When diluting always pour product into water and not vice versa. Prevent formation of aerosols. Do not breathe vapour. Avoid contact with skin and eyes.
Protect from frost. Keep container tightly sealed.
When using do not eat, drink or smoke. Ensure that washing facilities are available at the work place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use only in well-ventilated areas.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Natural rubber, NR, Chloroprene rubber (CR). The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
In case of insufficient ventilation, wear suitable respiratory equipment. Filter P2. In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Wear protective clothing.
Do not allow to enter sewers/ surface or ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at environment temperature.
Reacts with alkali (lyes).
Reacts with alkali (lyes).
Do not store together with alkalis (caustic solutions).
Reacts with alkali (lyes).
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
The contained surfactants are biodegradable.
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The product is not, nor contains, a substance that is, vPvB.
12.6 Endocrine disrupting properties
The product does not contain substances with endocrine disrupting properties.
12.7 Other adverse effects
Rinse off of large amounts can lower pH and harm aquatic organisms, but diluted use-level waste is considered low water-dangerous.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Must not be disposed together with household garbage.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1805
- Shipping Name
- PHOSPHORIC ACID, SOLUTION
- Transport Class
- 8
- Packing Group
- III
Warning: Corrosive substances.
Warning: Corrosive substances.
Warning: Corrosive substances.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Alfa Phos?
The signal word is danger.
What is the physical form of Alfa Phos?
Alfa Phos is a fluid with yellow-brown color. It has not determined. odor.
What is Alfa Phos used for?
Industrial cleaner
What are the hazard statements for Alfa Phos?
This substance has 2 hazard statements:
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
What is the melting point of Alfa Phos?
The melting point is Undetermined. and the boiling point is >100 °C.