NextSDS Logo
Safety Data Sheet EN

Ammonium chloride GPR RECTAPUR®

CAS 12125-02-9

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Ammonium chloride GPR RECTAPUR®
Product Code
21235
Chemical Name
Ammonium chloride

Regulatory Identifiers

CAS Number
12125-02-9 Check regulations →
REACH No.
01-2119487950-27-XXXX

Identified Uses

General chemical reagent

Manufacturers & Suppliers

V

VWR International Ltd.

distributor

Hunter Boulevard, Magna Park, Lutterworth, LE17 4XN

0800 22 33 44

Emergency Contacts

CareChem24

+44 (0) 1270 502894

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4 H302
Eye Irrit. Cat. 2 H319

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H302 Harmful if swallowed.
H319 Causes serious eye irritation.

Precautionary Statements

P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301 + P312 IF SWALLOWED: Call a POISON CENTER/doctor/.../if you feel unwell.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Ammonium chloride 12125-02-9 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Call a POISON CENTRE/doctor. Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration.

Skin contact

After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated clothing immediately. In case of skin reactions, consult a physician.

Eye contact

In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye. Remove contact lenses, if present and easy to do. Continue rinsing.

Ingestion

If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention. Do NOT induce vomiting. Give nothing to eat or drink.

Immediate Medical Attention

Obtain immediate medical attention if swallowed. Consult a physician in case of skin reactions. Consult an ophthalmologist for eye contact.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

The product itself does not burn. Co-ordinate fire-fighting measures to the fire surroundings.

Unsuitable media

no restriction

Specific hazards

In case of fire may be liberated: Hydrogen chloride (HCl), Nitrogen oxides (NOx)

Instructions

In case of fire: Evacuate area.

Firefighter Protection

Do not inhale explosion and combustion gases.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Do not allow to enter into surface water or drains.

Cleanup methods

Clean contaminated articles and floor according to the environmental legislation.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid inhalation. Avoid contact with eyes and skin.

Storage

Protect from moisture.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.

Hands

When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms EN ISO 374 In the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,12 mm, Breakthrough time: > 480 min, Recommended glove articles: VWR 112-0998. By long-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,38 mm, Breakthrough time: > 480 min, Recommended glove articles: VWR 112-3717 / 112-1381.

Eyes

Eye glasses with side protection DIN-/EN-Norms: DIN EN 166. Recommendation: VWR 111-0432

Respiratory

Respiratory protection necessary at: aerosol or mist formation. Suitable respiratory protection apparatus: Full-/half-/quarter-face masks (DIN EN 136/140). Recommendation: VWR 111-0206. Suitable material: ABEK2P3. Recommendation: VWR 111-0059

Skin/Body

Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.

Environmental

no data available

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Softening Point
---
Lower Explosive Limit
no data available
Physical State
solid
Solubility In Water
372 g/l (20 °C)
Vapor Density
no data available
Solidification Point
---
Upper Explosive Limit
no data available
Auto Ignition Temperature
> 400 °C
Boiling Point
no data available
Solubility In Fat
---
Properties Status
---
Form
---
Cloud Point
---
Molecular Weight
---
Odor Threshold
no data available
Ph
5 (50 g/l; H2O; 20 °C)
Explosive Limits
---
Colour Intensity
---
Bulk Density
no data available
Colour
white
Dynamic Viscosity
no data available
Relative Density
1.5256 g/cm³ (20 °C)
Flash Point
no data available
Partition Coefficient
-4.37 (20 °C; calculated)
Voc Content
---
Decomposition Temperature
no data available
State Under Standard Conditions
---
Relative Evaporation Rate
---
Solubility
---
Vapor Pressure
1 mmHg (160 °C)
Crystallisation Point
---
Odor
no data available
Flammability
not applicable
Freezing Point
---
Melting Point
335 °C
Density
---
Physical State Data
solid
Kinematic Viscosity
no data available
Metal Corrosion
---
Evaporation Rate
no data available
Appearance
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is chemically stable under standard ambient conditions (room temperature).

Reactivity

no data available

Hazardous reactions

no data available

Avoid

no data available

Incompatible

no data available

Decomposition

no data available

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Ammonium chloride GPR RECTAPUR®?

The signal word is warning.

What is the physical form of Ammonium chloride GPR RECTAPUR®?

Ammonium chloride GPR RECTAPUR® is a solid with white color. It has no data available odor.

What is Ammonium chloride GPR RECTAPUR® used for?

General chemical reagent

What are the hazard statements for Ammonium chloride GPR RECTAPUR®?

This substance has 2 hazard statements:

  • H302: Harmful if swallowed.
  • H319: Causes serious eye irritation.

What is the melting point of Ammonium chloride GPR RECTAPUR®?

The melting point is 335 °C and the boiling point is no data available.