Ammonium chloride GPR RECTAPUR®

Call a POISON CENTRE/doctor. Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration.

After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated clothing immediately. In case of skin reactions, consult a physician.

In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye. Remove contact lenses, if present and easy to do. Continue rinsing.

If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention. Do NOT induce vomiting. Give nothing to eat or drink.

Water. Foam. Dry extinguishing powder ABC-powder Alcohol resistant foam.

Full water jet

In case of fire may be liberated: Hydrogen chloride (HCl) Nitrogen oxides (NOx)

DO NOT fight fire when fire reaches explosives. Use water spray jet to protect personnel and to cool endangered containers.

Avoid dust formation. Do not breathe dust. Avoid contact with skin, eyes and clothes.

Do not allow to enter into surface water or drains.

Clean contaminated articles and floor according to the environmental legislation.

Avoid: Dust formation Inhalation. Avoid contact with eyes and skin. Wash hands before breaks and after work. When using do not eat, drink or smoke.

Protect from moisture.

Wash hands before breaks and after work. Avoid contact with eyes and skin. When using do not eat, drink or smoke. Provide eye shower and label its location conspicuously.

Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.

When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms EN ISO 374 In the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact: Suitable material: NBR (Nitrile rubber) Thickness of the glove material: 0,12 mm Breakthrough time: > 480 min Recommended glove articles: VWR 112-0998. By long-term hand contact: Suitable material: NBR (Nitrile rubber) Thickness of the glove material: 0,38 mm Breakthrough time: > 480 min Recommended glove articles : VWR 112-3717 / 112-1381

Eye glasses with side protection DIN-/EN-Norms EN 166 Recommendation: VWR 111-0432

Respiratory protection necessary at: aerosol or mist formation. Suitable respiratory protection apparatus: Full-/half-/quarter-face masks (EN 136/140) Recommendation: VWR 111-0206 Suitable material: ABEK2P3 Recommendation: VWR 111-0059

Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.

no data available

The product is chemically stable under standard ambient conditions (room temperature).

Thermal decomposition: Temperature control required.

Violent reaction with: Nitrates Acids. Alkali hydroxide

To avoid thermal decomposition, do not overheat.

Aluminium Lead Copper. Iron. Nitrates Chlorates Chlorine Alkali hydroxide Acids. Nitrites

Decomposition products in case of fire: see section 5.