Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DL-Dithiothreitol
- Product Code
- D1071
Regulatory Identifiers
- CAS Number
- N/A
- EC Number
- 222-468-7 Check regulations →
Identified Uses
Use as laboratory reagent
Manufacturers & Suppliers
TCI EUROPE N.V.
manufacturer
Boereveldseweg 6 - Haven 1063, B-2070 Zwijndrecht, Belgium
+32 (0)3 735 07 00
Emergency Contacts
Emergency Contact
+44 844 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| DL-Dithiothreitol EC: 222-468-7 | 3483-12-3 | 90 - 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. Get medical advice/ attention if you feel unwell.
Take off all contaminated clothing immediately. Wash off with plenty of water. If skin irritation occurs: Get medical advice/ attention.
Rinse with plenty of water. If easy to do, remove contact lens, if worn. If eye irritation persists: Get medical advice/ attention.
Call a POISON CENTER or doctor/ physician if you feel unwell. Rinse mouth.
Immediate Medical Attention
None known.
Medical Treatment
None known.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry powder, Foam, Water spray, Carbon dioxide (CO2)
No information available.
Immediately evacuate personnel to safe areas. Remove undamaged containers from fire area if it is safe to do so.
Firefighter Protection
Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear suitable protective equipment. Keep people away from and upwind of spill/leak. Entry to non-involved personnel should be controlled around the leakage area by roping off, etc.
Prevent product from entering drains.
Pick up and arrange disposal without creating dust.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin, eyes and clothing. Wear personal protective equipment. Wash hands and face thoroughly after handling.
Keep container tightly closed. Store in a refrigerator. Protect from moisture. Keep under inert gas.
Wash hands and face thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Install a closed system or local exhaust. Also install safety shower and eye bath.
Protective gloves
Safety glasses, Face-shield
Dust mask
Protective suit
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No data available
None under normal processing.
Heat, Exposure to air., Exposure to moisture
Oxidizing agents, Strong bases
Carbon monoxide, Carbon dioxide (CO2), Sulphur oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DL-Dithiothreitol?
The signal word is warning.
What is the physical form of DL-Dithiothreitol?
DL-Dithiothreitol is a solid form with white color. It has no data available odor.
What is DL-Dithiothreitol used for?
Use as laboratory reagent
What are the hazard statements for DL-Dithiothreitol?
This substance has 3 hazard statements:
- H302: Harmful if swallowed.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
What is the melting point of DL-Dithiothreitol?
The melting point is 43 °C and the boiling point is 130 °C (2 mmHg).