Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- WD-40 Multi-Use Product Aerosol
- Product Form
- Aerosol
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant, Penetrant, Drives Out Moisture, Removes and Protects Surfaces From Corrosion
Uses advised against
None identified
Manufacturers & Suppliers
WD-40 Company
manufacturer
9715 Businesspark Avenue, San Diego, California, USA, 92131
Emergency Contacts
Emergency Contact
1-888-324-7596
Chemtrec
1-800-424-9300
Emergency Contact
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS04
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| LVP Aliphatic Hydrocarbon | 64742-47-8 | 45 - 50% | Yes |
| Petroleum Base Oil | 64742-56-9 | 35% | No |
| Aliphatic Hydrocarbon | 64742-47-8 | 25% | Yes |
| Carbon Dioxide | 124-38-9 | 2 - 3% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If irritation is experienced, move to fresh air. Get medical attention if irritation or other symptoms develop and persist.
Symptoms: May cause respiratory irritation. Inhalation of mists or vapors may cause drowsiness, dizziness and other nervous system effects.
Wash with soap and water. If irritation develops and persists, get medical attention.
Symptoms: Skin contact may cause drying of the skin.
Flush thoroughly with water. Remove contact lenses if present after the first 5 minutes and continue flushing for several more minutes. Get medical attention if irritation persists.
Symptoms: May cause eye irritation.
Aspiration Hazard. DO NOT induce vomiting. Call physician, poison control center or the WD-40 Safety Hotline at 1-888-324-7596 immediately.
Symptoms: Harmful or fatal if swallowed. Aspiration of liquid into the lungs during swallowing or vomiting may cause lung damage.
Immediate Medical Attention
Immediate medical attention is needed for ingestion.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water fog, dry chemical, carbon dioxide or foam.
Do not use water jet or flooding amounts of water. Burning product will float on the surface and spread fire.
Extremely flammable aerosol. Contents under pressure. Keep away from ignition sources and open flames. Exposure of containers to extreme heat and flames can cause them to rupture often with violent force. Vapors are heavier than air and may travel along surfaces to remote ignition sources and flash back.
Cool fire-exposed containers with water. Use shielding to protect against bursting containers.
Firefighter Protection
Firefighters should always wear positive pressure self-contained breathing apparatus and full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Contain and collect liquid with an inert absorbent and place in a container for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes. Avoid prolonged contact with skin. Avoid breathing vapors or aerosols. Use only with adequate ventilation. Keep away from heat, sparks, pilot lights, hot surfaces and open flames. Unplug electrical tools, motors and appliances before spraying or bringing the can near any source of electricity. Electricity can burn a hole in the can and cause contents to burst into flames. To avoid serious burn injury, do not let the can touch battery terminals, electrical connections on motors or appliances or any other source of electricity. Wash thoroughly with soap and water after handling. Keep containers closed when not in use. Keep out of the reach of children. Do not puncture, crush or incinerate containers, even when empty.
Store in a cool, well-ventilated area, away from incompatible materials. Do not store above 120°F or in direct sunlight. U.F.C (NFPA 30B) Level 3 Aerosol. Store away from oxidizers.
Wash thoroughly with soap and water after handling.
Keep away from heat, sparks, pilot lights, hot surfaces and open flames. Unplug electrical tools, motors and appliances before spraying or bringing the can near any source of electricity.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
Not reactive under normal conditions
May react with strong oxidizers generating heat.
Avoid heat, sparks, flames and other sources of ignition. Do not puncture or incinerate containers.
Strong oxidizing agents.
Carbon monoxide and carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- Aerosols
- Transport Class
- 2.1
LTD QTY
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for WD-40 Multi-Use Product Aerosol?
The signal word is danger.
What is the physical form of WD-40 Multi-Use Product Aerosol?
WD-40 Multi-Use Product Aerosol is a aerosol appearing as light amber liquid . It has mildpetroleum odor odor.
What is WD-40 Multi-Use Product Aerosol used for?
Lubricant, Penetrant, Drives Out Moisture, Removes and Protects Surfaces From Corrosion
What are the hazard statements for WD-40 Multi-Use Product Aerosol?
This substance has 4 hazard statements:
- H222: Extremely Flammable Aerosol.
- H280: Contains gas under pressure; may explode if heated.
- H304: May be fatal if swallowed and enters airways.
- H336: May cause drowsiness or dizziness.
What is the melting point of WD-40 Multi-Use Product Aerosol?
The melting point is Not established and the boiling point is 361 - 369F (183 - 187°C).