Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- WD-40 Aerosol
- Chemical Name
- Organic Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaner Lubricant
Manufacturers & Suppliers
WD-40 Company
manufacturer
1061 Cudahy Place (92110) P.O. Box 80607 San Diego, California, USA 92138 -0607
1-888-324-7596
Emergency Contacts
PROSAR
1-888-324-7596
Chemtrec
1-800-424-9300
Chemtrec
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS02
GHS04
GHS07
GHS08
Hazard Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Aliphatic Hydrocarbon | 64742-48-9 | 45 - 50% | Yes |
| Aliphatic Hydrocarbon | 64742-88-7 | 45 - 50% | Yes |
| Petroleum Base Oil | 64742-65-0 | 15 - 25% | Yes |
| LVP Aliphatic Hydrocarbon | 64742-47-8 | 12 - 18% | Yes |
| Carbon Dioxide | 124-38-9 | 2 - 3% | Yes |
| Non-Hazardous Ingredients | --- | 10% | No |
| Aliphatic Hydrocarbon | 64742-47-8 | 45 - 50% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If irritation is experienced, move to fresh air.
Symptoms: irritation or other symptoms
Wash with soap and water.
Symptoms: irritation
Flush thoroughly with water. Remove contact lenses if present after the first 5 minutes and continue flushing for several more minutes.
Symptoms: irritation
DO NOT induce vomiting. Call physician, poison control center or the WD-40 Safety Hotline at 1-888-324-7596 immediately.
Symptoms: Aspiration Hazard.
Immediate Medical Attention
Get medical attention if irritation or other symptoms develop and persist.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water fog, dry chemical, carbon dioxide or foam.
Do not use water jet or flooding amounts of water.
Contents under pressure. Exposure of containers to extreme heat and flames can cause them to rupture often with violent force. Vapors are heavier than air and may travel along surfaces to remote ignition sources and flash back.
Cool fire-exposed containers with water. Use shielding to protect against bursting containers.
Firefighter Protection
Firefighters should always wear positive pressure self-contained breathing apparatus and full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Leaking cans should be placed in a plastic bag or open pail until the pressure has dissipated. Contain and collect liquid with an inert absorbent and place in a container for disposal. Clean spill area thoroughly.
Clean spill area thoroughly.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes. Avoid prolonged contact with skin. Avoid breathing vapors or aerosols. Use only with adequate ventilation. Keep away from heat, sparks, pilot lights, hot surfaces and open flames. Unplug electrical tools, motors and appliances before spraying or bringing the can near any source of electricity. Do not let the can touch battery terminals, electrical connections on motors or appliances or any other source of electricity. Wash thoroughly with soap and water after handling. Keep containers closed when not in use. Keep out of the reach of children. Do not puncture, crush or incinerate containers, even when empty.
Store in a cool, well-ventilated area, away from incompatible materials. Do not store above 120°F or in direct sunlight.
Wash thoroughly with soap and water after handling.
Keep away from heat, sparks, pilot lights, hot surfaces and open flames. Unplug electrical tools, motors and appliances before spraying or bringing the can near any source of electricity.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
Will not occur.
Avoid heat, sparks, flames and other sources of ignition. Do not puncture or incinerate containers.
Strong oxidizing agents.
Carbon monoxide and carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose in accordance with federal, state, and local regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- Aerosols
- Transport Class
- 2.1
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This MSDS has been prepared according to the criteria of the Controlled Products Regulation (CPR) and the MSDS contains all of the information required by the CPR.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for WD-40 Aerosol?
The signal word is danger.
What is the physical form of WD-40 Aerosol?
WD-40 Aerosol is a liquid appearing as light amber liquid/mild odor . It has mild odor odor.
What is WD-40 Aerosol used for?
Cleaner Lubricant
What are the hazard statements for WD-40 Aerosol?
This substance has 7 hazard statements:
- H223: Flammable aerosol.
- H226: Keep away from heat, sparks and all other sources of ignition.
- H280: Contents under pressure.
- H302: Harmful of fatal if swallowed.
- H304: If swallowed, may be aspirated and cause lung damage.
- Avoid eye contact.
- Use with adequate ventilation.