NextSDS Logo
Safety Data Sheet EN

Masson trichrome Reagent E

CAS 61429-74-4
EC 234-713-5

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Masson trichrome Reagent E
Product Code
04-010802.E

Regulatory Identifiers

CAS Number
61429-74-4 Check regulations →
EC Number
234-713-5 Check regulations →

Identified Uses

In vitro medical-diagnostic disposable. Reagent for microscopy.

Manufacturers & Suppliers

B

BIO-OPTICA MILANO SPA

manufacturer

via San Faustino, 58, 20134 Milano Italia

0039 02 2127131

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Eye Irrit. Cat. 2 H319
Skin Irrit. Cat. 2 H315

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation.
H319 Causes serious eye irritation.

Precautionary Statements

P264 Wash hands thoroughly after handling.
P280 Wear protective gloves / eye protection / face protection.
P302 + P352 IF ON SKIN: wash with plenty of water / . . .
P332 + P313 If skin irritation occurs: Get medical advice / attention.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Acido fosfomolibdico EC: 234-713-5 51429-74-4 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to open air. In the event of breathing difficulties, get medical advice/attention immediately.

Skin contact

Remove contaminated clothing. Wash immediately with plenty of water. If irritation persists, get medical advice/attention. Wash contaminated clothing before using it again.

Eye contact

Remove contact lenses, if present. Wash immediately with plenty of water for at least 15 minutes, opening the eyelids fully. If problem persists, seek medical advice.

Ingestion

Get medical advice/attention. Induce vomiting only if indicated by the doctor. Never give anything by mouth to an unconscious person, unless authorised by a doctor.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

carbon dioxide, foam, powder and water spray.

Unsuitable media

None in particular.

Specific hazards

Do not breathe combustion products.

Instructions

Use jets of water to cool the containers to prevent product decomposition and the development of substances potentially hazardous for health.

Firefighter Protection

Always wear full fire prevention gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use breathing equipment if fumes or powders are released into the air.

Environmental

The product must not penetrate into the sewer system or come into contact with surface water or ground water.

Cleanup methods

Collect as much material as possible and eliminate the rest using jets of water.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep away from heat, sparks and naked flames; do not smoke or use matches or lighters. Avoid bunching of electrostatic charges.

Storage

Store only in the original container. Store in a well ventilated place.

Hygiene

Do not eat, drink or smoke during use. Remove any contaminated clothes and personal protective equipment before entering places in which people eat.

Fire prevention

Keep away from heat, sparks and naked flames; do not smoke or use matches or lighters.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

As the use of adequate technical equipment must always take priority over personal protective equipment, make sure that the workplace is well aired through effective local aspiration.

Hands

Protect hands with category III work gloves (see standard EN 374). The following should be considered when choosing work glove material: compatibility, degradation, failure time and permeability. The work gloves' resistance to chemical agents should be checked before use, as it can be unpredictable. The gloves' wear time depends on the duration and type of use.

Eyes

Wear airtight protective goggles (see standard EN 166).

Respiratory

If the threshold value (e.g. TLV-TWA) is exceeded for the substance or one of the substances present in the product, use a mask with a type B filter whose class (1, 2 or 3) must be chosen according to the limit of use concentration. (see standard EN 14387). In the presence of gases or vapours of various kinds and/or gases or vapours containing particulate (aerosol sprays, fumes, mists, etc.) combined filters are required. Respiratory protection devices must be used if the technical measures adopted are not suitable for restricting the worker's exposure to the threshold values considered. The protection provided by masks is in any case limited. If the substance considered is odourless or its olfactory threshold is higher than the corresponding TLV-TWA and in the case of an emergency, wear open-circuit compressed air breathing apparatus (in compliance with standard EN 137) or external air-intake breathing apparatus (in compliance with standard EN 138). For a correct choice of respiratory protection device, see standard EN 529.

Skin/Body

Wear category II professional long-sleeved overalls and safety footwear (see Directive 89/686/EEC and standard EN ISO 20344). Wash body with soap and water after removing protective clothing.

Environmental

The emissions generated by manufacturing processes, including those generated by ventilation equipment, should be checked to ensure compliance with environmental standards.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

State Under Standard Conditions
---
Density
---
Boiling Point
Not available.
Physical State
liquid
Explosive Limits
---
Form
---
Lower Explosive Limit
Not available.
Odor
odourless
Dynamic Viscosity
Not available.
Melting Point
Not available.
Solubility In Water
---
Relative Density
Not available.
Partition Coefficient
Not available.
Physical State Data
liquid
Odor Threshold
Not available.
Evaporation Rate
Not available.
Metal Corrosion
---
Upper Explosive Limit
Not available.
Colour
colourless
Vapor Density
Not available.
Solubility
soluble
Properties Status
---
Voc Content
0 (Directive 2010/75/EC)
Vapor Pressure
Not available.
Molecular Weight
---
Auto Ignition Temperature
Not available.
Relative Evaporation Rate
---
Colour Intensity
---
Cloud Point
---
Decomposition Temperature
Not available.
Freezing Point
---
Bulk Density
---
Flash Point
Not available.
Kinematic Viscosity
Not available.
Ph
Not available.
Softening Point
---
Crystallisation Point
---
Appearance
liquid
Flammability
---
Solidification Point
---
Solubility In Fat
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable in normal conditions of use and storage.

Reactivity

There are no particular risks of reaction with other substances in normal conditions of use.

Hazardous reactions

No hazardous reactions are foreseeable in normal conditions of use and storage.

Avoid

None in particular. However the usual precautions used for chemical products should be respected.

Incompatible

Information not available.

Decomposition

Information not available.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Masson trichrome Reagent E?

The signal word is warning.

What is the physical form of Masson trichrome Reagent E?

Masson trichrome Reagent E is a liquid appearing as liquid with colourless color. It has odourless odor.

What is the solubility of Masson trichrome Reagent E?

soluble

What is Masson trichrome Reagent E used for?

In vitro medical-diagnostic disposable. Reagent for microscopy.

What are the hazard statements for Masson trichrome Reagent E?

This substance has 2 hazard statements:

  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.

What is the melting point of Masson trichrome Reagent E?

The melting point is Not available. and the boiling point is Not available..