Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CEALEY
- Product Code
- SCS103 v1
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Aluminium Anti-Seize Compound 500g Tin 0.5 litre
Manufacturers & Suppliers
Sealey Group
manufacturer
Kempson Way, Bury St. Edmunds, Suffolk. IP32 7AR
Emergency Contacts
Emergency Contact
44 (0) 1284 757 500
Office Hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Aluminium Paste | --- | 1 - 10% | No |
| Sodium Nitrite | 7632-00-0 | 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Remove and wash contaminated clothing and shoes. Wash exposed portions of the skin with soap and water.
Flush eyes with large amounts of water for 15 minutes while holding eyelids open.
Do not induce vomiting.
Immediate Medical Attention
Seek medical attention (for eye contact and ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry powder, carbon dioxide.
Do not use water jet.
The product can form flammable mixtures or can burn only on heating above the flash point.
Only use water only to cool fire exposed containers.
Firefighter Protection
Do not enter confined fire space without protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
If handling hydraulic oil: Ensure there is adequate ventilation. Use Personal Protective Equipment, see Section 8.
Do not empty into drains.
Take up with absorbent material, e.g. sawdust, sand or vermiculite. Place materials taken up into disposable container.
Materials: absorbent material, e.g. sawdust, sand or vermiculite
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes and skin. Ensure good ventilation in working area. Keep away from heat and direct sunlight. Keep receptacles tightly closed.
Keep receptacles tightly closed. Keep away from heat and direct sunlight.
Keep away from heat and direct sunlight.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use chemical-resistant gloves, if needed.
Wear chemical goggles to prevent eye contact.
Not required under normal usage. If product is handled in such a way as to create a vapour or mist, an approved respirator should be used to prevent overexposure.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended transport or storage conditions. Stable under normal conditions.
Hazardous reactions will not occur under normal transport or storage conditions.
Hazardous reactions will not occur under normal transport or storage conditions.
Heat.
Strong oxidizing agents. Strong acids.
In combustion emits toxic fumes.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for CEALEY?
The signal word is no signal word.
What is the physical form of CEALEY?
CEALEY is a solid appearing as silver. . It has odourless. odor.
What is CEALEY used for?
Aluminium Anti-Seize Compound 500g Tin 0.5 litre
What is the melting point of CEALEY?
The melting point is > 200°C and the boiling point is Not relevant..