Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LITHIUM EP2
- Product Code
- 6095
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- Mixture
Identified Uses
LUBRICATING GREASE
Manufacturers & Suppliers
Smith & Allan
manufacturer
Valley Street North, Darlington, County Durham, DL1 1QE
01325 462228
Emergency Contacts
Emergency Contact
01325 462228
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
A blend of highly refined mineral oils and multifunctional additives with thickener system.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Zinc alkyl dithiophosphate | --- | 2.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
Rinse opened eye for several minutes under running water. Then consult a doctor. Check for and remove any contact lenses.
Do not induce vomiting; call for medical help immediately.
Immediate Medical Attention
Call for medical help immediately. Consult doctor in case of complaints or if irritation continues.
Medical Treatment
High pressure injection injuries through the skin require prompt surgical intervention and possibly steroid therapy, to minimise tissue damage and loss of function. Surgical exploration to determine the extent of involvement may be necessary. Prompt surgical decompression, debridement and evacuation of foreign material should be performed under general anaesthetics, and wide exploration is essential.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Water with full jet
No further relevant information available.
Firefighter Protection
Wear self-contained respiratory protective device. Wear fully protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Particular danger of slipping on leaked/spilled product.
Do not allow to penetrate the ground/soil. Do not allow to enter sewers/ surface or ground water.
Pick up mechanically.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent formation of aerosols. Ensure good ventilation/exhaustion at the workplace.
Store in cool, dry conditions in well sealed receptacles. Store in a bunded area.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses
Not required.
Oil resistant protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used and stored according to specifications.
No dangerous reactions known.
No further relevant information available.
Strong oxidising agents.
Carbon monoxide and carbon dioxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LITHIUM EP2?
The signal word is no signal word.
What is the physical form of LITHIUM EP2?
LITHIUM EP2 is a pasty appearing as pasty with brown color. It has mineral-oil-like odor.
What is LITHIUM EP2 used for?
LUBRICATING GREASE
What is the melting point of LITHIUM EP2?
The melting point is Undetermined. and the boiling point is Undetermined..