Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Battery Electrolyte
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
EnerSys
manufacturer
P.O. Box 14145, 2366 Bernville Road, Reading, PA 19612-4145
610-208-1996
EnerSys Canada Corporate Office
manufacturer
3-61 Parr Boulevard, Bolton, Ontario, L7E 4E3
Emergency Contacts
EnerSys' Environmental, Health & Safety Dept.
610-208-1996
CHEMTREC
800-424-9300
CHEMTREC
703-527-3877
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Inorganic Lead Compound: Sulfuric Acid | 7664-93-9 | 30 - 40% | No |
| Water (H2O) | --- | 60 - 70% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air immediately. If breathing is difficult, give oxygen.
Flush with large amounts of water for at least 15 minutes; remove contaminated clothing completely, including shoes. Wash contaminated clothing before reuse. Discard contaminated shoes.
Flush immediately with large amounts of water for at least 15 minutes.
Give large quantities of water; do not induce vomiting.
Symptoms: Aspiration into the lungs may occur and can cause permanent injury or death.
Immediate Medical Attention
Consult a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2; foam; dry chemical; water; water fog.
Reacts violently with metals, nitrates, chlorates, carbides and other organic materials. Reacts with most metals to yield explosive and flammable hydrogen gas.
Water applied to sulfuric acid generates heat and causes acid to splatter.
Firefighter Protection
Wear full-cover sulfuric acid resistant clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop flow of material, contain/absorb small spills with dry sand, earth or vermiculite. Do not use combustible materials. If possible, carefully neutralize spilled electrolyte with soda ash, sodium bicarbonate, lime, etc.
contain/absorb small spills with dry sand, earth or vermiculite
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle cautiously; avoid contact with skin and eyes.
Store in cool, dry, well-ventilated areas with impervious surfaces and adequate containment in the event of spills.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This product is stable under normal conditions at ambient temperature.
Contact with combustibles and organic materials may cause fire and explosion. Also reacts violently with strong reducing agents, metals, sulfur trioxide gas, strong oxidizers and water.
Contact with organic materials, combustibles, strong reducing agents, metals, strong oxidizers, water.
combustibles, organic materials, strong reducing agents, metals, sulfur trioxide gas, strong oxidizers, water.
Sulfur trioxide, carbon monoxide, sulfuric acid mist, sulfur dioxide, and hydrogen sulfide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2796
- Shipping Name
- Battery Fluid, Acid
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Battery Electrolyte?
The signal word is danger.
What is the physical form of Battery Electrolyte?
Battery Electrolyte is a liquid appearing as electrolyte is a clear liquid with a sharp, penetrating, pungent odor. . It has sharp, penetrating, pungent odor odor.
What are the hazard statements for Battery Electrolyte?
This substance has 2 hazard statements:
- H314: Causes severe skin burns and eye damage.
- H350: May cause cancer from inhalation of mists.