Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- tetra-Sodium diphosphate decahydrate
- Product Code
- T883
- Chemical Name
- tetra-Sodium diphosphate decahydrate
Regulatory Identifiers
- CAS Number
- 13472-36-1 Check regulations →
- EC Number
- 231-767-1 Check regulations →
- REACH No.
- 01-2119489794-17
Identified Uses
Laboratory chemical Laboratory and analytical use
Uses advised against
Do not use for private purposes (household). Food, drink and animal feedingstuffs.
Manufacturers & Suppliers
Carl Roth GmbH + Co. KG
manufacturer
Schoemperlenstr. 3-5, D-76185 Karlsruhe, Germany
+49 (0) 721 - 56 06 0
http://www.carlroth.de
Emergency Contacts
National Poisons Information Centre Beaumont Hospital
+353 1 809 2166
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| tetra-Sodium diphosphate decahydrate EC: 231-767-1 | 13472-36-1 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air.
Rinse skin with water/shower.
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart.
Symptoms: Risk of blindness, Risk of serious damage to eyes
Rinse mouth with water (only if the person is conscious).
Symptoms: Vomiting
Immediate Medical Attention
In all cases of doubt, or when symptoms persist, seek medical advice. Consult an ophthalmologist. Call a doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
co-ordinate firefighting measures to the fire surroundings! water, foam, alcohol resistant foam, dry extinguishing powder, ABC-powder
water jet
Non-combustible.
Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
For non-emergency personnel: Use personal protective equipment as required. Avoid contact with skin, eyes and clothes. Do not breathe dust.
Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.
Take up mechanically.
Related Products
Similar products with comparable safety profiles
Sodium phosphate tribasic dodecahydrate
CAS: 10101-89-0
di-Sodium tetraborate decahydrate
CAS: 1303-96-4
Sodium phosphate dibasic dodecahydrate
CAS: 10039-32-4
Ethylenediaminetetraacetic acid disodium salt dihydrate
CAS: 6381-92-6
Ethylenediaminetetraacetic acid disodium salt dihydrate
CAS: 6381-92-6
Ethylenediaminetetraacetic acid disodium salt dihydrate
CAS: 6381-92-6
di-Sodium hydrogen phosphate dihydrate
CAS: 10028-24-7
Sodium tetraborate decahydrate
CAS: 1303-96-4
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid dust formation.
Store in a dry place. Keep container tightly closed.
Wash hands before breaks and after work. Keep away from food, drink and animal feedingstuffs.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. The times are approximate values from measurements at 22 °C and permanent contact. Increased temperatures due to heated substances, body heat etc. and a reduction of the effective layer thickness by stretching can lead to a considerable reduction of the breakthrough time. If in doubt, contact manufacturer. At an approx. 1.5 times larger / smaller layer thickness, the respective breakthrough time is doubled / halved. The data apply only to the pure substance. When transferred to substance mixtures, they may only be considered as a guide. - type of material: NBR (Nitrile rubber) - material thickness: >0,11 mm - breakthrough times of the glove material: >480 minutes (permeation: level 6)
Use safety goggle with side protection.
Respiratory protection necessary at: Dust formation. Particulate filter device (EN 143). P2 (filters at least 94 % of airborne particles, colour code: White).
Take recovery periods for skin regeneration. Preventive skin protection (barrier creams/ointments) is recommended.
Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.
This material is not reactive under normal ambient conditions.
Violent reaction with: strong oxidiser
Keep away from heat.
There is no additional information.
Hazardous combustion products: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for tetra-Sodium diphosphate decahydrate?
The signal word is danger.
What is the physical form of tetra-Sodium diphosphate decahydrate?
tetra-Sodium diphosphate decahydrate is a solid with colourless color. It has odourless odor.
What is tetra-Sodium diphosphate decahydrate used for?
Laboratory chemical Laboratory and analytical use
What are the hazard statements for tetra-Sodium diphosphate decahydrate?
This substance has 2 hazard statements:
- H302: Harmful if swallowed
- H318: Causes serious eye damage
What is the melting point of tetra-Sodium diphosphate decahydrate?
The melting point is 93,8 °C (Release of crystal water) and the boiling point is not determined.