Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sodium pyrophosphate decahydrate
- Product Code
- SC-203404
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For research use only. Not intended for diagnostic or therapeutic use.
Manufacturers & Suppliers
Santa Cruz Biotechnology, Inc.
manufacturer
10410 Finnell Street, Dallas, TX 75220
831.457.3800
Emergency Contacts
Chemtrec
1.800.424.9300
Chemtrec
+1.703.527.3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium pyrophosphate decahydrate | 13472-36-1 | 98% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. Call a physician or poison control center immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Immediate medical attention is required. Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes.
Immediate medical attention is required. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing. Do not rub affected area.
Immediate medical attention is required. Do NOT induce vomiting. Drink plenty of water. Never give anything by mouth to an unconscious person. Remove from exposure, lie down. Clean mouth with water and drink afterwards plenty of water. Call a physician or poison control center immediately.
Immediate Medical Attention
Immediate medical attention is required. Call a physician or poison control center immediately.
Medical Treatment
Product is a corrosive material. Use of gastric lavage or emesis is contraindicated. Possible perforation of stomach or esophagus should be investigated. Do not give chemical antidotes. Asphyxia from glottal edema may occur. Marked decrease in blood pressure may occur with moist rales, frothy sputum, and high pulse pressure. Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
No information available.
The product causes burns of eyes, skin and mucous membranes. Thermal decomposition can lead to release of irritating and toxic gases and vapors. In the event of fire and/or explosion do not breathe fumes.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas. Keep people away from and upwind of spill/leak.
Do not allow into any sewer, on the ground or into any body of water. Should not be released into the environment. Prevent further leakage or spillage if safe to do so. Prevent product from entering drains.
Take up mechanically, placing in appropriate containers for disposal. Clean contaminated surface thoroughly. After cleaning, flush away traces with water.
Materials: appropriate containers
Related Products
Similar products with comparable safety profiles
Sodium pyrophosphate
CAS: 7722-88-5
Sodium pyrophosphate
CAS: 7722-88-5
Sodium pyrophosphate
CAS: 7722-88-5
Sodium Acid Pyrophosphate
---
Sodium phosphate dibasic dodecahydrate
CAS: 10039-32-4
Sodium phosphate tribasic dodecahydrate
CAS: 10101-89-0
tetra-Sodium diphosphate decahydrate
CAS: 13472-36-1
Sodium phosphate, tribasic dodecahydrate
CAS: 10101-89-0
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use personal protective equipment as required. Avoid contact with skin, eyes or clothing.
Keep container tightly closed in a dry and well-ventilated place. Keep out of the reach of children. Keep containers tightly closed in a dry, cool and well-ventilated place. Keep in properly labeled containers. Store at room temperature.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Showers, Eyewash stations, Ventilation systems
Wear protective gloves
Tight sealing safety goggles. Face protection shield.
If exposure limits are exceeded or irritation is experienced, NIOSH/MSHA approved respiratory protection should be worn. Positive-pressure supplied air respirators may be required for high airborne contaminant concentrations. Respiratory protection must be provided in accordance with current local regulations.
Wear protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Not applicable
None under normal processing. Hazardous polymerization: No information available.
Exposure to air or moisture over prolonged periods.
Incompatible with strong acids and bases. Incompatible with oxidizing agents.
Thermal decomposition can lead to release of irritating and toxic gases and vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
May cause long lasting harmful effects to aquatic life.
12.2 Persistence and degradability
No information available.
12.3 Bioaccumulative potential
No information available.
12.4 Mobility in soil
No information available.
12.5 Results of PBT and vPvB assessment
No information available.
12.6 Endocrine disrupting properties
No information available.
12.7 Other adverse effects
No information available.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal should be in accordance with applicable regional, national and local laws and regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sodium pyrophosphate decahydrate?
The signal word is warning.
What is the physical form of Sodium pyrophosphate decahydrate?
Sodium pyrophosphate decahydrate is a solid appearing as crystalline . It has odorless odor.
What is Sodium pyrophosphate decahydrate used for?
For research use only. Not intended for diagnostic or therapeutic use.
What are the hazard statements for Sodium pyrophosphate decahydrate?
This substance has 4 hazard statements:
- H302: Harmful if swallowed
- H315: Causes skin irritation
- H319: Causes serious eye irritation
- H335: May cause respiratory irritation
What is the melting point of Sodium pyrophosphate decahydrate?
The melting point is 79.5 °C and the boiling point is 93.8 °C.