Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Shell Gadus S2 V220AC 2
- Product Code
- 001D8456
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Automotive and industrial grease.
Uses advised against
This product must not be used in applications other than those listed in Section 1 without first seeking the advice of the supplier.
Manufacturers & Suppliers
Viva Energy Australia Pty Ltd
manufacturer
720 Bourke Street, Docklands, Victoria 3008, Australia
+61 (0)3 8823 4444
Emergency Contacts
Emergency Contact
1800 651 818
POISONS INFORMATION CENTRE
13 11 26
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Hazard Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
A lubricating grease containing highly-refined mineral oils and additives. The highly refined mineral oil contains <3% (w/w) DMSO-extract, according to IP346. Classification based on DMSO extract content < 3% (Regulation (EC) 1272/2008, Annex VI, Part 3, Note L). * contains one or more of the following CAS-numbers: 64742-53-6, 64742-54-7, 64742-55-8, 64742-56-9, 64742-65-0, 68037-01-4, 72623-86-0, 72623-87-1, 8042-47-5, 848301-69-9, 68649-12-7, 151006-60-9, 163149-28-8, 64741-88-4, 64741-89-5.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Interchangeable low viscosity base oil (<20.5 cSt @40°C) * | --- | 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
No treatment necessary under normal conditions of use. If symptoms persist, obtain medical advice.
Remove contaminated clothing. Flush exposed area with water and follow by washing with soap if available. If persistent irritation occurs, obtain medical attention. When using high pressure equipment, injection of product under the skin can occur. If high pressure injuries occur, the casualty should be sent immediately to a hospital. Do not wait for symptoms to develop. Obtain medical attention even in the absence of apparent wounds.
Symptoms: Oil acne/folliculitis signs and symptoms may include formation of black pustules and spots on the skin of exposed areas. Local necrosis is evidenced by delayed onset of pain and tissue damage a few hours following injection.
Flush eye with copious quantities of water. Remove contact lenses, if present and easy to do. Continue rinsing. If persistent irritation occurs, obtain medical attention.
In general no treatment is necessary unless large quantities are swallowed, however, get medical advice.
Symptoms: Ingestion may result in nausea, vomiting and/or diarrhea.
Immediate Medical Attention
If high pressure injuries occur, the casualty should be sent immediately to a hospital. Do not wait for symptoms to develop. Obtain medical attention even in the absence of apparent wounds.
Medical Treatment
Treat symptomatically. High pressure injection injuries require prompt surgical intervention and possibly steroid therapy, to minimise tissue damage and loss of function. Because entry wounds are small and do not reflect the seriousness of the underlying damage, surgical exploration to determine the extent of involvement may be necessary. Prompt surgical decompression, debridement and evacuation of foreign material should be performed under general anaesthetics, and wide exploration is essential.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, water spray or fog. Dry chemical powder, carbon dioxide, sand or earth may be used for small fires only.
Do not use water in a jet.
Hazardous combustion products may include: A complex mixture of airborne solid and liquid particulates and gases (smoke). Carbon monoxide may be evolved if incomplete combustion occurs. Unidentified organic and inorganic compounds.
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Firefighter Protection
Proper protective equipment including chemical resistant gloves are to be worn; chemical resistant suit is indicated if large contact with spilled product is expected. Self-Contained Breathing Apparatus must be worn when approaching a fire in a confined space. Select fire fighter's clothing approved to relevant Standards (e.g. Europe: EN469).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with skin and eyes.
Use appropriate containment to prevent uncontrolled release. Prevent from spreading or entering drains, ditches or rivers by using sand, earth, or other appropriate barriers.
Prevent from spreading or entering into drains, ditches or rivers by using sand, earth, or other appropriate barriers.
Materials: sand, earth, or other appropriate barriers
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid prolonged or repeated contact with skin. Avoid inhaling vapour and/or mists. When handling product in drums, safety footwear should be worn and proper handling equipment should be used. Properly dispose of any contaminated rags or cleaning materials in order to prevent fires.
Keep container tightly closed and in a cool, well-ventilated place. Use properly labeled and closable containers. Store at ambient temperature.
Avoid prolonged or repeated contact with skin.
Properly dispose of any contaminated rags or cleaning materials in order to prevent fires.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable.
The product does not pose any further reactivity hazards in addition to those listed in the following sub-paragraph.
Reacts with strong oxidising agents.
Extremes of temperature and direct sunlight.
Strong oxidising agents.
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Shell Gadus S2 V220AC 2?
The signal word is no signal word.
What is the physical form of Shell Gadus S2 V220AC 2?
Shell Gadus S2 V220AC 2 is a semi-solid appearing as semi-solid at ambient temperature. with red color. It has slight hydrocarbon odor.
What is Shell Gadus S2 V220AC 2 used for?
Automotive and industrial grease.
What are the hazard statements for Shell Gadus S2 V220AC 2?
This substance has 3 hazard statements:
- PHYSICAL HAZARDS: Not classified as a physical hazard under GHS criteria.
- HEALTH HAZARDS: Not classified as a health hazard under GHS criteria.
- ENVIRONMENTAL HAZARDS: Not classified as an environmental hazard under GHS criteria.
What is the melting point of Shell Gadus S2 V220AC 2?
The melting point is 175 °C / 347 °F Method: IP 396 and the boiling point is Data not available.