Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Taxine (mixture of Taxine B and iso-Taxine B) (~80%)
- Product Code
- TRC-T100085-1MG
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- HJ69-K0FF-V00T-XY4M
Identified Uses
Laboratory use
Uses advised against
No information available
Manufacturers & Suppliers
LGC Limited
manufacturer
Queens Road, Teddington, Middlesex TW11 0LY, UNITED KINGDOM
+44 (0) 20 8943 7000
http://www.lgcstandards.com
Emergency Contacts
CHEMTREC
1-800-424-9300
CHEMTREC
+1 703-741-5970
Emergency Contact
112
Emergency Contact
(+352) 8002 5500
24/7
FR, NL, EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS06
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of organic compounds.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Taxine B | 1361-51-9 | 40 - 60% | Yes |
| Isotaxine B | 172617-92-4 | 40 - 60% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. IF exposed or concerned: Get medical advice/attention. Get medical attention immediately if symptoms occur. If breathing has stopped, give artificial respiration. Get medical attention immediately. Do not breathe dust. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. If breathing is difficult, (trained personnel should) give oxygen.
Symptoms: Coughing and/ or wheezing. Difficulty in breathing.
Get immediate medical advice/attention. Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes.
Get immediate medical advice/attention. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing. Remove contact lenses, if present and easy to do. Continue rinsing. Do not rub affected area.
Symptoms: Redness and tearing of the eyes.
Do NOT induce vomiting. Rinse mouth. Never give anything by mouth to an unconscious person. Get immediate medical advice/attention.
Immediate Medical Attention
Immediate medical attention is required.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Do not scatter spilled material with high pressure water streams.
No information available.
CAUTION: Use of water spray when fighting fire may be inefficient.
Firefighter Protection
Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep people away from and upwind of spill/leak.
Prevent further leakage or spillage if safe to do so.
Take up mechanically, placing in appropriate containers for disposal.
Related Products
Similar products with comparable safety profiles
Toxaphene 1000 µg/mL in Isooctane
---
Thiophenes, benzothiophenes and dibenzothiophenes, Individual Compounds (< 0.2 %), in Isooctane I
---
C0-C1 Dibenzothiophenes, Individual Compounds (< 0.2 %), in Isooctane
---
Tissue-Tek® Xylene (mixed isomers)
---
Thiophenes, Benzothiophenes and Dibenzothiophenes, Individual Compounds (<0.2%), in Isooctane I
---
Thiophenes, Benzothiophenes and Dibenzothiophenes, Individual Compounds (<0.2%), in Isooctane I
---
Toluene/Xylene Mixture
---
2-Imidazolidinethione, 98%
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes or clothing. Take off contaminated clothing and wash it before reuse. Do not eat, drink or smoke when using this product. Do not breathe dust. Avoid generation of dust. In case of insufficient ventilation, wear suitable respiratory equipment. Handle product only in closed system or provide appropriate exhaust ventilation.
Please refer to the manufacturer's certificate for specific storage and transport temperature conditions. Store only in the original receptacle unless other advice is given on the CoA. Keep containers tightly closed in a dry, cool and well-ventilated place. Keep out of the reach of children. Store locked up.
Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product. Wash hands before breaks and after work. Wear suitable gloves and eye/face protection. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Regular cleaning of equipment, work area and clothing is recommended. Wash hands before breaks and immediately after handling the product. Do not breathe dust. Take off contaminated clothing and wash it before reuse. Contaminated work clothing should not be allowed out of the workplace.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear suitable gloves. Impervious gloves. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374. Wear protective nitrile rubber gloves.
Avoid contact with eyes. Wear safety glasses with side shields (or goggles).
No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required.
Wear suitable protective clothing. Long sleeved clothing. Chemical resistant apron.
Do not allow into any sewer, on the ground or into any body of water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No information available.
None under normal processing.
Excessive heat.
Strong acids. Strong bases. Strong oxidising agents.
None known based on information supplied.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1544
- Shipping Name
- Alkaloids, solid, n.o.s. (poisonous) (Isotaxine B, Taxine B)
- Transport Class
- 6.1
- Packing Group
- III
43, 223, 274
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Taxine (mixture of Taxine B and iso-Taxine B) (~80%)?
The signal word is danger.
What is the physical form of Taxine (mixture of Taxine B and iso-Taxine B) (~80%)?
Taxine (mixture of Taxine B and iso-Taxine B) (~80%) is a solid appearing as solid with off-white color. It has no information available. odor.
What is the solubility of Taxine (mixture of Taxine B and iso-Taxine B) (~80%)?
No data available
What is Taxine (mixture of Taxine B and iso-Taxine B) (~80%) used for?
Laboratory use
What are the hazard statements for Taxine (mixture of Taxine B and iso-Taxine B) (~80%)?
This substance has 6 hazard statements:
- H301: Toxic if swallowed
- H311: Toxic in contact with skin
- H315: Causes skin irritation
- H319: Causes serious eye irritation
- H331: Toxic if inhaled
- H370: Causes damage to organs
What is the melting point of Taxine (mixture of Taxine B and iso-Taxine B) (~80%)?
The melting point is No data available and the boiling point is No data available.