Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sodium hydroxide 1 mol/l (1 N) in aqueous solution AVS TITRINORM® Reagent Ph.Eur. chapter 4.2.2, USP, NF
- Product Code
- 31627
Regulatory Identifiers
- CAS Number
- 1310-73-2 Check regulations →
Identified Uses
General chemical reagent
Manufacturers & Suppliers
VWR International Ltd.
distributor
Hunter Boulevard, Magna Park, Lutterworth, LE17 4XN
0800 22 33 44
Emergency Contacts
CareChem24
+44 (0) 1270 502894
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium hydroxide EC: 215-185-5 | 1310-73-2 | 2 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Immediately call a POISON CENTRE/doctor. Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration.
After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated clothing immediately.
Symptoms: corrosive injuries
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye. Remove contact lenses, if present and easy to do. Continue rinsing.
Immediately call a POISON CENTRE/doctor. Do NOT induce vomiting. Rinse mouth thoroughly with water. Give nothing to eat or drink.
Immediate Medical Attention
Immediate medical treatment required because corrosive injuries that are not treated are hard to cure. Immediately call a POISON CENTRE/doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The product itself does not burn. Co-ordinate fire-fighting measures to the fire surroundings.
no restriction
In case of fire may be liberated: Pyrolysis products, toxic
DO NOT fight fire when fire reaches explosives. Use water spray jet to protect personnel and to cool endangered containers.
Firefighter Protection
Wear a self-contained breathing apparatus and chemical protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
In case of major fire and large quantities: Remove persons to safety.
In case of major fire and large quantities: Remove persons to safety. Wear a self-contained breathing apparatus and chemical protective clothing.
Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains.
Soak up inert absorbent
Materials: inert absorbent
Related Products
Similar products with comparable safety profiles
Sodium hydroxide 0,5 mol/l 0,5 N AVS TITRINORM® Reagent Ph.Eur. chapter 4.2.2
CAS: 1310-73-2
Sodium hydroxide 0,5 mol/l 0,5 N AVS TITRINORM® Reagent Ph.Eur. chapter 4.2.2
CAS: 1310-73-2
VWR Int Sodium Hydroxide 0.1 mol/l (0.1N) AVS TITRINORM
---
Hydrochloric acid 1 mol/l (1 N) AVS TITRINORM® Reagent Ph.Eur. chapter 4.2.2, USP, NF
CAS: 7647-01-0
Sodium hydroxide solution c(NaOH) = 1 mol/l (1 N) Titripur® Reag. Ph Eur,Reag. USP
UFI: 6QQX-855Q-X99P-WAHM
Sodium hydroxide solution c(NaOH) = 1 mol/l (1 N) Titripur® Reag. Ph Eur,Reag. USP
---
Sodium hydroxide solution c(NaOH) = 1 mol/l (1 N) Titripur® Reag. Ph Eur,Reag. USP
UFI: 6QQX-855Q-X99P-WAHM
Sodium hydroxide, 1.0N Standardized Solution
UFI: 69KJ-0TRD-6W0E-QYPU
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid: Inhalation, Avoid contact with eyes and skin.
Keep container tightly closed and in a well-ventilated place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.
When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms: EN ISO 374 in the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,12 mm, Breakthrough time (maximum wearing time): > 480 min, Recommended glove articles: VWR 112-0998. By long-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,38 mm, Breakthrough time (maximum wearing time): > 480 min, Recommended glove articles: VWR 112-3717 / 112-1381.
Eye glasses with side protection DIN-/EN-Norms: DIN EN 166. Recommendation: VWR 111-0432
Respiratory protection necessary at: aerosol or mist formation. Suitable respiratory protection apparatus: Full-/half-/quarter-face masks (DIN EN 136/140). Recommendation: VWR 111-0206. Suitable material: ABEK2P3. Recommendation: VWR 111-0059.
Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.
no data available
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
no data available
Formation of explosive mixtures with: Metal, base, light metals. Formation of: Hydrogen. Violent reaction with: Acid, Oxidising agent, strong.
no data available
Substance, organic, Metal
no data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1824
- Shipping Name
- SODIUM HYDROXIDE SOLUTION
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sodium hydroxide 1 mol/l (1 N) in aqueous solution AVS TITRINORM® Reagent Ph.Eur. chapter 4.2.2, USP, NF?
The signal word is danger.
What is the physical form of Sodium hydroxide 1 mol/l (1 N) in aqueous solution AVS TITRINORM® Reagent Ph.Eur. chapter 4.2.2, USP, NF?
Sodium hydroxide 1 mol/l (1 N) in aqueous solution AVS TITRINORM® Reagent Ph.Eur. chapter 4.2.2, USP, NF is a liquid with colourless color. It has no data available odor.
What is Sodium hydroxide 1 mol/l (1 N) in aqueous solution AVS TITRINORM® Reagent Ph.Eur. chapter 4.2.2, USP, NF used for?
General chemical reagent
What are the hazard statements for Sodium hydroxide 1 mol/l (1 N) in aqueous solution AVS TITRINORM® Reagent Ph.Eur. chapter 4.2.2, USP, NF?
This substance has 2 hazard statements:
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
What is the melting point of Sodium hydroxide 1 mol/l (1 N) in aqueous solution AVS TITRINORM® Reagent Ph.Eur. chapter 4.2.2, USP, NF?
The melting point is no data available and the boiling point is no data available.