Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- URANIA ECOSYNTH
- Product Code
- 71654
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Engine oil.
Uses advised against
This product should not be used for other purposes than those specified without the advice of an expert.
Manufacturers & Suppliers
PETRONAS LUBRICANTS ITALY S.P.A.
manufacturer
Via Santena 1, 10029 Villastellone (Torino)
+39.01196131
Emergency Contacts
Emergency Contact
+44 1235 239670
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Severely refined paraffinic mineral and synthetic oils, viscosity 40°C <=20.5 cSt (**) | --- | 30 - 40% | Yes |
| Bis(nonylphenyl)amine EC: 253-249-4 | 36878-20-3 | 2.5 - 3% | Yes |
| Distillates, petroleum, hydrotreated heavy paraffinic EC: 265-157-1 | 64742-54-7 | 1 - 1.5% | Yes |
| Distillates (petroleum), solvent-dewaxed light paraffinic EC: 265-159-2 | 64742-56-9 | 1 - 1.5% | Yes |
| Distillates (petroleum), solvent-dewaxed heavy paraffinic EC: 265-169-7 | 64742-65-0 | 1 - 1.5% | Yes |
| reaction mass of isomers of C7-9-alkyl 3-(3,5-di-trans-butyl-4-hydroxyphenyl)propioate EC: 406-040-9 | 125643-61-0 | 1 - 1.5% | Yes |
| Paraffin oils, petroleum, catalytic dewaxed heavy EC: 265-174-4 | 64742-70-7 | 1 - 1.5% | Yes |
| C14-16-18 Alkyl phenol EC: 931-468-2 | 1190625-94-5 | 0.5 - 0.95% | Yes |
| Molibdenum polysulphide long chain alkyl dithiocarbamate complex | --- | 0.1 - 0.25% | Yes |
| Not classified oils | --- | 20 - 30% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Expose affected person to fresh air and obtain medical attention if necessary.
Remove contaminated clothes and shoes and rinse thoroughly with plenty of water and soap.
Rinse thoroughly with plenty of water for at least 10 minutes keeping eyelids open. Remove contact lenses if this can be done easily. In case of contact with hot product, rinse thoroughly with plenty of water to dissipate heat.
Wash out thoroughly the mouth with water. Do NOT induce vomiting to avoid aspiration into the respiratory tracts.
Immediate Medical Attention
Obtain medical attention in case of development and persistence of pain and redness (eyes). Obtain immediate medical attention to assess eye conditions and the correct treatment to be practiced (eyes). Obtain immediate medical attention (ingestion). Obtain medical attention if necessary (inhalation).
Medical Treatment
Refer to section 4.1.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water, Carbon dioxide (CO2), foam, dry chemical powder, and water mist.
None in particular. Avoid high pressure water jet.
Containers may explode if involved in fire.
Cool down with water the containers don't get involved in fire to avoid their possible explosion. Use water jet only to cool down surfaces exposed to fire.
Firefighter Protection
Use suitable breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid ingestion of product. Avoid contact with skin and eyes by wearing appropriate protective clothing. Avoid to breathe fumes and aerosols. Surfaces on which the product has been spilled may become slippery. Wear personal protection equipment. See protective measures under point 7 and 8.
Contain small spills with absorbent material.
dike, absorb and shovel up into suitable containers for disposal
Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains. Retain contaminated washing water and dispose it.
shovel up into suitable containers for disposal
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid ingestion. Avoid frequent and prolonged skin contact and contact with eyes. Don't work near open container to avoid high concentration of vapours.
Store under cover in the original container securely closed away from heat and sources of ignition. Do not store in the open air.
Don't eat or drink during use.
Don't smoke or use spare flames; avoid contact with spark or other sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Avoid production and diffusion of mist and aerosol with utilization of localized ventilation/aspiration or other required precautions.
Wear suitable gloves (i.e. neoprene, nitrile). Gloves should be changed when they show wear. The kind of gloves and the term of use must be decided from employer with regard to processing and to allow for DPI legislation and glove producer's indications. Wear gloves only with clean hands.
Chemical goggles and face shield in case of oil splashes.
None required under normal conditions of use. Use approved full face respirator with organic vapour filter cartridge if the recommended exposure limits are exceeded.
Wear suitable protective clothing (for further information, refer to CEN-EN 14605); change it immediately in case of large contamination and wash it before subsequent use.
Refer to technical precautions and also to sections 6.2, 6.3, 7.2, 12 and 13. Adopt all required precaution to avoid product immission in environment (e.g., blasting systems, catch basins, ...).
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under normal conditions of use.
Read carefully all information provided in other sections of heading 10.
Not expected under normal conditions of use.
This product must be kept far from heat sources. In any case, avoid exposing product to temperatures above the flash point.
Strong oxidizing agents, hard acids and bases.
Oxides of carbon, compounds of sulphur, phosphorus, nitrogen and hydrogen sulfide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. TOXICITY
The product is not classified as dangerous for the environment.
12.1. TOXICITY
12.1. TOXICITY
12.2. PERSISTENCE AND DEGRADABILITY
12.3. BIOACCUMULATIVE POTENTIAL
12.4. MOBILITY IN SOIL
The substance may contaminate soil, subsoil, surface water, and groundwater if released into the environment.
12.5. RESULTS OF PBT AND VPVB ASSESSMENT
12.6. ENDOCRINE DISRUPTING PROPERTIES
No endocrine disrupting properties are known.
12.7 OTHER ADVERSE EFFECTS
No effect known.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose in accordance with local or national regulations via authorised person/licensed waste disposal contractor.
Recover if possible. In so doing, comply with the local and national regulations currently in force.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Regulation (EC) No 1272/2008, with all National and European related legislations - on classification, labelling and packaging of substances and mixtures - and following adjustments to technical and scientific progress. Regulation (EC) No 1907/2006, with all National and European related legislations - concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH).
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for URANIA ECOSYNTH?
The signal word is no signal word.
What is the physical form of URANIA ECOSYNTH?
URANIA ECOSYNTH is a liquid appearing as viscous amber . It has not relevant odor.
What is URANIA ECOSYNTH used for?
Engine oil.
What is the melting point of URANIA ECOSYNTH?
The melting point is N.A. and the boiling point is 300 °C (572 °F) (ASTM D2887).