NextSDS Logo
Safety Data Sheet EN

Neste MY Renewable Jet Fuel™

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Neste MY Renewable Jet Fuel™
Product Code
ID 14714
Chemical Name
Renewable hydrocarbons (kerosine type fraction)

Regulatory Identifiers

CAS Number
N/A
REACH No.
01-2119850115-46-0000

Identified Uses

Distribution of substance (ES2) Formulation & (re)packing of substances and mixtures (ES3) Use as a fuel (ES4)

Manufacturers & Suppliers

N

Neste Oyj

manufacturer

Keilaranta 21, Espoo, P.O.B. 95, FIN-00095 NESTE, FINLAND

+358 10 45811

Emergency Contacts

Poison Information Centre

+358-9-471 977

Poison Information Centre

+358-9-4711

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 3 H226
Asp. Tox. Cat. 1 H304

GHS Pictograms

GHS02 - Flammable

GHS02

GHS08 - Serious health hazard

GHS08

Hazard Statements

H226 Flammable liquid and vapour.
H304 May be fatal if swallowed and enters airways.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
P331 Do NOT induce vomiting.
P501 Dispose of contents/ container in accordance with national regulations.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Renewable hydrocarbons (kerosine type fraction) --- 100% Yes

Total aromatics at maximum: 1,0%, Identity outside the EU (CAS number and name of the substance): Alkanes, C8-18-branched and linear (CAS 2252265-89-5)

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air and keep comfortable for breathing.

Symptoms: Vapours may irritate throat/respiratory system.

Skin contact

Remove contaminated clothing immediately and wash skin with soap and water.

Symptoms: Repeated exposure may cause skin dryness or cracking.

Eye contact

Rinse immediately with plenty of water. Remove contact lenses, if present and easy to do. Continue rinsing.

Ingestion

Do not induce vomiting.

Symptoms: Entry into the lungs following ingestion or vomiting may cause chemical pneumonitis.

Immediate Medical Attention

Get medical attention if symptoms are severe or persist (inhalation). Get medical attention immediately (ingestion). Get medical attention if irritation persists after washing (skin/eye).

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray, foam, dry powder or carbon dioxide.

Unsuitable media

Do not use water jet as an extinguisher, as this will spread the fire.

Specific hazards

Flammable liquid and vapour. Containers can burst violently or explode when heated, due to excessive pressure build-up.

Instructions

Cool containers exposed to heat with water spray and remove them from the fire area if it can be done without risk.

Firefighter Protection

Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Prevent unauthorized access. Eliminate all ignition sources if safe to do so. Take precautionary measures against static discharge.

Environmental

Avoid release to the environment.

Cleanup methods

Immediately start clean-up of the liquid and contaminated soil.

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid heat, flames and other sources of ignition. Take precautionary measures against static discharges. All handling should only take place in well-ventilated areas. Try to avoid product volatilization during handling and transferring. Avoid inhalation of vapours and contact with skin and eyes. Use personal protective equipment and/or local ventilation when needed. During tank operations follow special instructions (risk of oxygen displacement and hydrocarbons).

Storage

Flammable liquid storage. Store in accordance with local regulations. Store in a demarcated bunded area to prevent release to drains and/or watercourses. Take precautions against leakage by constructing collecting pools and sewerage systems as well as by surfacing the loading and unloading stations. Only store in correctly labelled containers.

Hygiene

Do not eat, drink or smoke when using this product. Wash hands and any other contaminated areas of the body with soap and water before leaving the work site.

Fire prevention

Avoid heat, flames and other sources of ignition. Take precautionary measures against static discharges.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

All handling should only take place in well-ventilated areas. Handle product within a predominantly closed system provided with extract ventilation. Use personal protective equipment and/or local ventilation when needed.

Hands

Chemical-resistant, impervious gloves complying with an approved standard should be worn if a risk assessment indicates skin contact is possible. It is recommended that gloves are made of the following material: Nitrile rubber. Neoprene. Polyvinyl chloride (PVC). The selected gloves should have a breakthrough time of at least 4 h hours. Protection class 5. Protective gloves according to standards EN 420 and EN 374. Change protective gloves regularly.

Eyes

Tight-fitting safety glasses.

Respiratory

Filter device/half mask Gas filter, type A2. Filter device could be used maximum 2 hours at a time. Filter devices must not be used in conditions where the oxygen level is low (< 19 vol.-%). At high concentrations a breathing apparatus must be used (self-contained or fresh air hose breathing apparatus). Filter must be changed often enough. Respirator according to standard EN 140. (APF 10, NIOSH approved)

Skin/Body

Protective clothing when needed. Wear anti-static protective clothing if there is a risk of ignition from static electricity.

Environmental

Take precautions against leakage by constructing collecting pools and sewerage systems as well as by surfacing the loading and unloading stations.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Mobile liquid.
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Mobile liquid.
Colour
Clear.
Colour Intensity
---
Form
---
Odor
Mild.
Odor Threshold
---
Ph
---
Melting Point
(Melting/pour point) < -40°C (IP529)
Boiling Point
>205-300°C (D86)
Flash Point
> 38°C (IP170)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
< 100 Pa @ 25°C (EC A4)
Vapor Density
---
Relative Density
0,73-0,77 @ 15°C (D4052)
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
Upper flammable/explosive limit vaporization unachievable up to 180°C (ASTM E681)
Lower Explosive Limit
Lower flammable/explosive limit @ 120°C = 0,6% v/v (ASTM E681)
Explosive Limits
---
Auto Ignition Temperature
~ 200°C (EC A15)
Decomposition Temperature
---
Solubility
---
Partition Coefficient
log Kow: > 6,2 (OECD 117)
Solubility In Water
< 1 mg/l @ 25°C (calculated)
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
2,51 mPa s @ 20°C (calculated)
Kinematic Viscosity
2,3 mm2/s @ 40°C 3,3 mm2/s @ 20°C (OECD 114)
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal ambient temperatures and when used as recommended.

Reactivity

There are no known reactivity hazards associated with this product.

Hazardous reactions

No potentially hazardous reactions known.

Avoid

Keep away from heat, sparks and open flame. Take precautionary measures against static discharges.

Incompatible

Oxidising agents.

Decomposition

None known.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1. Toxicity

Toxicity Based on available data the classification criteria are not met. No information on the product itself is available. Information given in the document is based on data from similar products.

12.1. Toxicity

Renewable hydrocarbons (kerosine type fraction) Acute aquatic toxicity Acute toxicity - fish LL₅₀, 96 hours: > 1000 mg/l, WAF (OECD 203) Acute toxicity - aquatic EL50, 48 hours: > 100 mg/l, invertebrates WAF (OECD 202) Acute toxicity - aquatic EL50, 72 hours: > 100 mg/l, plants WAF (OECD 201) Acute toxicity - EC₅₀, 3 hours: > 1000 mg/l, Micro-organisms (wastewater sludge) microorganisms (OECD 209) Chronic aquatic toxicity Chronic toxicity - aquatic NOEC, 21 days: 1 mg/l, invertebrates LOEC, 21 days: 3,2 mg/l, Daphnia magna WAF (OECD 211) NOEC, 10 days: 373 mg/kg, LC₅₀, 10 days: 1200 mg/kg, Sediment organisms (OSPAR Protocols, Part A: Sediment Bioassay, 2005)

12.2. Persistence and degradability

Stability (hydrolysis) No significant reaction in water. Ecological information on ingredients. ## Renewable hydrocarbons (kerosine type fraction)

12.2. Persistence and degradability

Biodegradation Rapidly degradable (OECD 301B)

12.3. Bioaccumulative potential

Bioaccumulative potential Possibly bioaccumulative. Partition coefficient log Kow: > 6,2 (OECD 117)

12.4. Mobility in soil

Evaporates slowly. The product has poor water-solubility. The product contains substances which are bound to particulate matter and are retained in soil. Adsorption/desorption log Koc > 5,6 (OECD 121) coefficient

12.5. Results of PBT and vPvB assessment

This product does not contain any substances classified as PBT or vPvB.

12.6. Other adverse effects

Other adverse effects Not known.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste Disposal Authority.

Disposal

Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste Disposal Authority.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1863
Shipping Name
FUEL, AVIATION, TURBINE ENGINE
Transport Class
3
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

EU legislation Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) (as amended). Commission Regulation (EU) No 2015/830 of 28 May 2015. Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures (as amended).

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Neste MY Renewable Jet Fuel™?

The signal word is danger.

What is the physical form of Neste MY Renewable Jet Fuel™?

Neste MY Renewable Jet Fuel™ is a mobile liquid. appearing as mobile liquid. with clear. color. It has mild. odor.

What is Neste MY Renewable Jet Fuel™ used for?

Distribution of substance (ES2) Formulation & (re)packing of substances and mixtures (ES3) Use as a fuel (ES4)

What are the hazard statements for Neste MY Renewable Jet Fuel™?

This substance has 2 hazard statements:

  • H226: Flammable liquid and vapour.
  • H304: May be fatal if swallowed and enters airways.

What is the melting point of Neste MY Renewable Jet Fuel™?

The melting point is (Melting/pour point) < -40°C (IP529) and the boiling point is >205-300°C (D86).