NextSDS Logo
Safety Data Sheet EN

Neste Renewable Diesel

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Neste Renewable Diesel
Product Code
ID 15783
Chemical Name
Renewable hydrocarbons (diesel type fraction)
Synonyms
Neste Renewable Diesel 100 %; Neste MY Renewable Diesel

Regulatory Identifiers

CAS Number
N/A
REACH No.
01-2119450077-42-0001

Identified Uses

Formulation & (re)packing of substances and mixtures, (ES 02) Distribution of substance, (ES 04) Use as an intermediate, (ES 05) Use as a fuel, (ES 06, 14, 23)

Manufacturers & Suppliers

N

Neste Singapore Pte Ltd

manufacturer

1 Tuas South Lane, Singapore 637301, SINGAPORE

+65 6223 1222

Emergency Contacts

Poison Information Centre

+358-9-471 977

Poison Information Centre

+358-9-4711

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Asp. Tox. Cat. 1 H304

GHS Pictograms

GHS08 - Serious health hazard

GHS08

Hazard Statements

H304 May be fatal if swallowed and enters airways.

Precautionary Statements

P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
P331 Do NOT induce vomiting.
P501 Dispose of contents/ container in accordance with national regulations.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Renewable hydrocarbons (diesel type fraction) 928771-01-1 100% Yes

Renewable hydrocarbons (diesel type fraction); Identity outside the EU (CAS number and name of the substance); Alkanes, C10-20-branched and linear, CAS 928771-01-1.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air and keep comfortable for breathing. Get medical attention if symptoms are severe or persist.

Symptoms: Spray/mists may cause respiratory tract irritation.

Skin contact

Remove contaminated clothing immediately and wash skin with soap and water. Get medical attention if irritation persists after washing.

Symptoms: Repeated exposure may cause skin dryness or cracking.

Eye contact

Rinse immediately with plenty of water. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if irritation persists after washing.

Ingestion

Do not induce vomiting. Get medical attention immediately.

Symptoms: Entry into the lungs following ingestion or vomiting may cause chemical pneumonitis.

Immediate Medical Attention

Get medical attention immediately (ingestion). Get medical attention if symptoms are severe or persist (inhalation). Get medical attention if irritation persists after washing (skin/eye).

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray, foam, dry powder or carbon dioxide.

Unsuitable media

Do not use water jet as an extinguisher, as this will spread the fire.

Specific hazards

Combustible liquid. Containers can burst violently or explode when heated, due to excessive pressure build-up.

Instructions

Cool containers exposed to heat with water spray and remove them from the fire area if it can be done without risk.

Firefighter Protection

Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Wear adequate protective equipment at all operations. Prevent unauthorized access. Eliminate all ignition sources if safe to do so. Take precautionary measures against static discharge.

Environmental

Avoid release to the environment. Stop leak if safe to do so. Avoid the spillage or runoff entering drains, sewers or watercourses.

Cleanup methods

Immediately start clean-up of the liquid and contaminated soil.

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid heat, flames and other sources of ignition. Take precautionary measures against static discharges. All handling should only take place in well-ventilated areas. Avoid inhalation of vapours and contact with skin and eyes. Use personal protective equipment and/or local ventilation when needed. During tank operations follow special instructions (risk of oxygen displacement and hydrocarbons).

Storage

Flammable liquid storage. Store in accordance with local regulations. Store in a demarcated bunded area to prevent release to drains and/or watercourses. Take precautions against leakage by constructing collecting pools and sewerage systems as well as by surfacing the loading and unloading stations. Only store in correctly labelled containers.

Hygiene

Do not eat, drink or smoke when using this product. Wash hands and any other contaminated areas of the body with soap and water before leaving the work site.

Fire prevention

Avoid heat, flames and other sources of ignition. Take precautionary measures against static discharges.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

All handling should only take place in well-ventilated areas. Use personal protective equipment and/or local ventilation when needed. During tank operations follow special instructions (risk of oxygen displacement and hydrocarbons).

Hands

Wear protective gloves. It is recommended that gloves are made of the following material: Nitrile rubber. Neoprene. Polyvinyl chloride (PVC). The selected gloves should have a breakthrough time of at least 4 hours. Protection class 5. Protective gloves according to standards EN 420 and EN 374. Change protective gloves regularly.

Eyes

Tight-fitting safety glasses.

Respiratory

Filter device/half mask Combination filter, type A2/P2. Filter device could be used maximum 2 hours at a time. Filter devices must not be used in conditions where the oxygen level is low (< 19 vol.-%). At high concentrations a breathing apparatus must be used (self-contained or fresh air hose breathing apparatus). Filter must be changed often enough. Respirator according to standard EN 140.

Skin/Body

Wear suitable protective clothing as protection against splashing or contamination. Wear anti-static protective clothing if there is a risk of ignition from static electricity.

Environmental

Take precautions against leakage by constructing collecting pools and sewerage systems as well as by surfacing the loading and unloading stations.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Liquid.
Colour
Clear.
Colour Intensity
---
Form
---
Odor
Mild.
Odor Threshold
---
Ph
---
Melting Point
Pour point < -20°C @ 1013 hPa (BS4633, EC A1)
Boiling Point
180-320°C (EN ISO 3405)
Flash Point
> 61°C (EN ISO 2719, EC A9)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
0,087 kPa @ 25°C (EC A4)
Vapor Density
---
Relative Density
0,77 - 0,79 @ 15/4°C (EN ISO 12185, EC A3)
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
204°C (EC A15)
Decomposition Temperature
---
Solubility
Insoluble in water. ~ 0,075 mg/l water @ 25°C (calculated) Soluble in the following materials: Methanol. Hydrocarbons.
Partition Coefficient
> 6,5 (EC A8)
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
≤ 5 mPa s @ 20°C
Kinematic Viscosity
4.0 mm2/s @ 20°C 2.6 mm2/s @ 40°C (OECD 114)
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal ambient temperatures and when used as recommended.

Reactivity

There are no known reactivity hazards associated with this product.

Hazardous reactions

No potentially hazardous reactions known.

Avoid

Keep away from heat, sparks and open flame.

Incompatible

Oxidising agents.

Decomposition

Does not decompose when used and stored as recommended.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1. Toxicity

Toxicity Based on available data the classification criteria are not met.

Based on available data the classification criteria are not met.

12.1. Toxicity

Acute aquatic toxicity Acute toxicity - fish LL₅₀, 96 hours: > 1000 mg/l, WAF (OECD 203) Acute toxicity - aquatic invertebrates EL50, 48 hours: > 100 mg/l, WAF (OECD 202) Acute toxicity - aquatic plants EL50, 72 hours: > 100 mg/l, Algae WAF (OECD 201) Acute toxicity - microorganisms EC₅₀, 30-180 minutes: > 1000 mg/l, Micro-organisms (wastewater sludge) (OECD 209) Chronic aquatic toxicity Chronic toxicity - aquatic invertebrates NOEC, 21 days: 1 mg/l, LOEC, 21 days: 3,2 mg/l, WAF (OECD 211) Sediment organisms NOEC, 10 days: 373 mg/kg, LOEC, 10 days: 1165 mg/kg, LC₅₀, 10 days: 1200 mg/kg, (OSPAR Protocols, Part A: Sediment Bioassay, 2005)

12.2. Persistence and degradability

Stability (hydrolysis) No significant reaction in water. Biodegradation Rapidly degradable (OECD 301B). Ecological information on ingredients. Renewable hydrocarbons (diesel type fraction) Biodegradation Rapidly degradable (OECD 301B)

Bioaccumulative potential

Possibly bioaccumulative. Partition coefficient log Kow: > 6,5 (EC A8)

12.4. Mobility in soil

Mobility Evaporates slowly. The product has poor water-solubility. The product contains substances which are bound to particulate matter and are retained in soil. Log Koc > 5.6 (EC C19).

Results of PBT and vPvB assessment

This product does not contain any substances classified as PBT or vPvB.

Other adverse effects

Not known.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste Disposal Authority.

Disposal

Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste Disposal Authority.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1202
Shipping Name
DIESEL FUEL
Transport Class
3
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Regulation (EC) No 1907/2006 (REACH), Commission Regulation (EU) No 2015/830, and Regulation (EC) No 1272/2008 (CLP) apply.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Neste Renewable Diesel known by?

Neste Renewable Diesel is also known as: Neste Renewable Diesel 100 %; Neste MY Renewable Diesel

What is the hazard signal word for Neste Renewable Diesel?

The signal word is danger.

What is the physical form of Neste Renewable Diesel?

Neste Renewable Diesel is a liquid appearing as liquid. with clear. color. It has mild. odor.

What is the solubility of Neste Renewable Diesel?

Insoluble in water. ~ 0,075 mg/l water @ 25°C (calculated) Soluble in the following materials: Methanol. Hydrocarbons.

What is Neste Renewable Diesel used for?

Formulation & (re)packing of substances and mixtures, (ES 02) Distribution of substance, (ES 04) Use as an intermediate, (ES 05) Use as a fuel, (ES 06, 14, 23)

What are the hazard statements for Neste Renewable Diesel?

This substance has 1 hazard statement:

  • H304: May be fatal if swallowed and enters airways.

What is the melting point of Neste Renewable Diesel?

The melting point is Pour point < -20°C @ 1013 hPa (BS4633, EC A1) and the boiling point is 180-320°C (EN ISO 3405).