Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Soapstock acid oil contaminated with Sulphur
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Caely Renewables BV
manufacturer
+31 020 730 3800
Emergency Contacts
National Poisons Information Center
+31 88 75 585 61
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Oils, vegetable, acidulated
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Oils, vegetable, acidulated | --- | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Take affected person into fresh air.
Remove contaminated clothing and wash exposed area with plenty of water. Then wash again with soap and water
Any material that contacts the eye should be washed out immediately with water.
Drink plenty of water.
Immediate Medical Attention
In all of the above cases, get a doctor to check the affected person.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use carbon dioxide, dry chemical or foam.
Flammable and combustible in directly contact with heat or fire Over >300C
Use water to keep fire-exposed container cool.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove sources of ignition, ventilate area, sweep up the liquid in dry sand and shovel into a closed container. Collect spillages into sumps / traps to minimize contamination of drains, surface and ground water.
Collect spillages into sumps / traps to minimize contamination of drains, surface and ground water.
sweep up the liquid in dry sand and shovel into a closed container
Materials: dry sand
Related Products
Similar products with comparable safety profiles
SULPHURIC ACID
UFI: HETT-WRC2-H50P-0U3W
SULPHURIC ACID 15 - 50%
CAS: 7664-93-9
SULPHURIC ACID DILUTED (From 52 to 94%)
UFI: 9P9X-4RQN-R50R-59X8 (Sulfuric acid 52-54.9%), 8G9X-4RAV-450R-UMS4 (Sulfuric acid 55-59.9%), 5W8X-KRH3-0509-67PP (Sulfuric acid 70-74.9%), 4D60-ASU6-8507-MTHD (Sulfuric acid 75-79.9%), QJ8X-JRRG-S509-JVCE (Sulfuric acid 80-84.9%), 018X-HRM3-X50A-KTV1 (Sulfuric acid 90-94.9%)
Mixed Acid Oils (Oleins)
---
Sulfur Oil Standard in Base Oil 20
---
Sulfur Oil Standard in Base Oil 20
---
Sulfur Oil Standard in Base Oil 20
---
Sulphuric acid 95-97% pro analyse
UFI: J5U6-JJK5-SX3D-GJ1X
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use full protective gear. Protect containers against physical damage / direct sunlight / water.
Use leak-proof and compatible drums. Store in dry and well-ventilated locations at ambient temperature, away from direct sunlight.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use adequate ventilation to keep airborne concentrations low. Avoid inhalation of heated vapors.
Rubber gloves
Protective goggles
Air respirator
Lab coat, Safety shoes
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under the prescribed storage conditions.
Will not occur.
Acrid smoke and irritating fumes when heated above its boiling point.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
The product should not be released into water without treatment.
12.2 Persistence and degradability
The material is easily biodegradable.
12.4 Mobility in soil
The product is insoluble in water and requires separation.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Stored waste / recovered material used for recycling along with crude oils.
Stored waste / recovered material used for recycling along with crude oils.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
According to the data available the product is not a regulated product.
However one should observe the prescribed federal, state &local measures for dealing with chemicals.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Soapstock acid oil contaminated with Sulphur?
The signal word is no signal word.
What is the physical form of Soapstock acid oil contaminated with Sulphur?
Soapstock acid oil contaminated with Sulphur is a liquid above 10 °c appearing as brown . It has characteristic odour odor.
What is the melting point of Soapstock acid oil contaminated with Sulphur?
The melting point is 10 °C and the boiling point is Not available.