Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Lubricating Oil
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
This material is a severely refined naphthenic refrigeration system lubricant.
Manufacturers & Suppliers
Sonneborn, LLC
manufacturer
600 Parsippany Road, Suite 100, Parsippany, NJ 07054 USA
Emergency Contacts
Chemtrec
800-424-9300
24hrs
Sonneborn
724-756-2210
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (Petroleum) hydrotreated heavy naphthenic EC: 265-155-0 | 64742-52-5 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Obtain medical attention. Oxygen may be given by qualified personnel if breathing is difficult or cyanosis is noted. Give artificial respiration if not breathing. Remove to fresh air if aerosol spray is inhaled.
Symptoms: Difficulty breathing, cyanosis (blue discoloration of skin). Aspiration may cause pulmonary edema or aspiration pneumonia.
Wash skin with soap and water.
Flush eyes thoroughly with water for several minutes.
Symptoms: Discomfort.
Do not induce vomiting.
Immediate Medical Attention
Obtain medical attention immediately (swallowing). Obtain medical attention if discomfort persists (eyes). Obtain medical attention (inhalation).
Medical Treatment
Oxygen may be given by qualified personnel if breathing is difficult or cyanosis is noted. Give artificial respiration if not breathing.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
dry chemical, carbon dioxide (in case of small fires), water fog, foam, sand or earth
Do not use water jet. Oil will float on water and can spread any fire.
This product will float upon water, so water spray is not a suitable extinguishing agent as it may cause any fire to spread.
Do not direct a solid stream of water or foam into burning material; this may cause spattering and spread the fire. If a rail or tank truck is involved in a fire, ISOLATE for 800 meters (0.5 mile) in all directions. Shut off fuel to fire if it is possible to do so without hazard. If this is impossible, withdraw from the area and let the fire burn out under controlled conditions. Withdraw immediately in case of rising sound from venting safety device or any discoloration of tank due to fire.
Firefighter Protection
Self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop the leak if it can be done without risk.
Avoid runoff to sewers or waterways. Dike area of spill to prevent spreading and pump liquid to salvage tank. Waste: avoid washing into watercourses. Use methods consistent with local regulations or incinerate.
Absorb on inert material such as sand, earth, vermiculite.
Materials: sand, earth, vermiculite
Related Products
Similar products with comparable safety profiles
Lubricant
---
Bearing Lubricant
---
MS Lubricant
---
Used Lubricating Oil (for laboratory testing purposes)
---
Maintenance Oil
UFI: SX20-M0QM-A00Q-AMRT WY60-E058-Q00Y-EP4U C270-W0UP-100G-20QW N470-E0J2-A00Y-RC9Y EA70-E0WU-X00Y-21G3
Penetrating Lubricant
---
LVLO Low Viscosity Lubricant Oil
---
Air Tool Lubricant
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not handle at temperatures >+40°C, unless wearing appropriate protective equipment.
Keep away from heat, sparks and flame. Do not store at temperatures: >+40°C without proper safety review of storage equipment. Store protected from light.
Keep away from heat, sparks and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear oil resistant gloves.
Face shield or chemical splash goggles in case of splashing.
None expected to be needed. If used in a way that generates a vapor/mist, wear an organic vapor respirator.
Wear protective clothing, such as long sleeves to minimize skin contact.
Store in a second containment to catch leakages
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
Will not occur.
Extreme temperature and direct sunlight/ultraviolet light
strong oxidizing agents
Oxides of carbon and Soot
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.1 Toxicity
12.2 Persistence and degradability
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with appropriate Federal, State and local regulations or incinerate.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
According to EC/GHS regulations this product is not classified or labeled
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Lubricating Oil?
The signal word is no signal word.
What is the physical form of Lubricating Oil?
Lubricating Oil is a liquid with amber color. It has mild petroleum odor.
What is Lubricating Oil used for?
This material is a severely refined naphthenic refrigeration system lubricant.