Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Frigutec® OAT100
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Heat transfer fluid
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
HVL GmbH
manufacturer
79410 Badenweiler Germany
+49-7632-823480
Emergency Contacts
Vergiftungs-Informations-Zentrale Freiburg
+49 (0) 761 19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air or oxygen; call for doctor. In case of unconsciousness place patient stably in side position for transportation.
Immediately rinse with water. Call a doctor immediately.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a doctor immediately.
Rinse out mouth and then drink plenty of water. Do NOT induce vomiting. Call for a doctor immediately.
Immediate Medical Attention
Call a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. Use fire extinguishing methods suitable to surrounding conditions.
Water with full jet
Formation of toxic gases is possible during heating or in case of fire.
Cool endangered receptacles with water spray.
Firefighter Protection
Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Wear protective clothing.
Dilute with plenty of water.
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Use neutralising agent.
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Frigutec® OAT+
UFI: 1QD4-GRJ1-M30W-4S6A
Frigutec® OAT-EVO
UFI: JH0T-EUQ4-Q00J-0G0N
Frigutec® OAT-EVO
UFI: JH0T-EUQ4-Q00J-0G0N
Frigutec® X-OAT
UFI: GYD4-0RM7-J30D-4SXH
Frigutec® OAT-Si++
UFI: 48XS-8URT-R00P-TKUY
Frigutec BS
---
Frigutec® BSN
UFI: TUC4-ERN2-J30Y-HCCP
Frigutec LongLife
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols.
Store in cool, dry conditions in well sealed receptacles.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
Only use chemical-protective gloves with CE-labelling of category III. DIN EN 374. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Butyl rubber (0.7 mm) Nitrile rubber (0.4 mm). Penetration time of glove material: ≥ 30 min. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Protective work clothing
No further relevant information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used and stored according to specifications.
Under normal conditions of use, no specific reactivity is known.
No dangerous reactions known.
No decomposition if used according to specifications.
No specific incompatible materials known.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability:
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The product does not contain any substances assessed as PBT or vPvB at concentrations ≥ 0.1%.
12.6 Endocrine disrupting properties
12.7 Other adverse effects
The product does not contain any substances ≥ 0.1% that have been assessed as PMT or vPvM.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must be specially treated adhering to official regulations.
Must be specially treated adhering to official regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1760
- Shipping Name
- CORROSIVE LIQUID, N.O.S. (Sodium trimethylhexanoate, SODIUM HYDROXIDE)
- Transport Class
- 8
- Packing Group
- II
Warning: Corrosive substances.
Warning: Corrosive substances.
Warning: Corrosive substances.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety, health and environmental regulations/legislation specific for the substance or mixture
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Frigutec® OAT100?
The signal word is danger.
What is the physical form of Frigutec® OAT100?
Frigutec® OAT100 is a liquid with clear color. It has not determined odor.
What is Frigutec® OAT100 used for?
Heat transfer fluid
What are the hazard statements for Frigutec® OAT100?
This substance has 2 hazard statements:
- H314: Causes severe skin burns and eye damage.
- H373: May cause damage to the kidneys through prolonged or repeated exposure. Route of exposure: Oral.
What is the melting point of Frigutec® OAT100?
The melting point is Not determined and the boiling point is 170 - 185 °C.