Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- RADIA 4670
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- 7EJ6-4F8V-RE03-QKUU
Identified Uses
Industrial use Wide dispersive use
Manufacturers & Suppliers
OLEON N.V.
manufacturer
Assenedestraat 2 BE 9940 Ertvelde Belgium
+32 9 341 10 11
http://www.oleon.com
Emergency Contacts
SGS ERS
+32 3 575 55 55
SGS ERS
+1 888 765 6554
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| ethylene glycol EC: 203-473-3 | 107-21-1 | 40 - 80% | Yes |
| glycerol EC: 200-289-5 | 56-81-5 | 50% | No |
| 1,2-propanediol EC: 200-338-0 | 57-55-6 | 50% | No |
| dipropylene glycol EC: 246-770-3 | 25265-71-8 | 20% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim to fresh air. Respiratory problems: consult a doctor/medical service.
Wash off immediately with soap and plenty of water. If irritation persists, consult a doctor.
Symptoms: Tingling/irritation of the skin.
Rinse immediately with plenty of water. Consult an ophthalmologist if irritation persists.
Symptoms: Irritation of the eye tissue.
Rinse mouth out with water. Get medical advice/attention if you feel unwell. Call a poison center (www.who.int/ipcs/poisons/centre/directory/en).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
AFFF foam. BC-powder. Carbon dioxide. Dry sand. Dry chemical powder. Use the extinguishing media recommended for the burning materials and fire situation.
Do not use water jet.
DIRECT FIRE HAZARD: Combustible. INDIRECT FIRE HAZARD: Heating may cause a fire or explosion. Temperature above flashpoint: higher fire/explosion hazard.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Mark the danger area. Exposure to fire/heat: have neighbourhood close doors and windows. Exposure to fire/heat: consider evacuation. Wash contaminated clothing before reuse.
Prevent soil and water pollution.
Clean contaminated surfaces with a soap solution. Flush/dilute with water. Take up liquid spill into absorbent material.
Materials: sand, earth, vermiculite or powdered limestone
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handling temperature : ≥ 10 °C above melting point
Store at ambient temperature. Keep out of direct sunlight. Meet the legal requirements.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Gloves
Safety glasses
Protective clothing. Materials for protective clothing: Good resistance: Nitrile rubber
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
On burning: release of carbon monoxide/carbon dioxide.
No additional information available
No supplementary information available.
No supplementary information available.
No supplementary information available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.2. Persistence and degradability
12.2. Persistence and degradability
12.2. Persistence and degradability
12.2. Persistence and degradability
12.2. Persistence and degradability
The substance is readily biodegradable in water.
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
The substance is considered not bioaccumulative with a log Pow of -1.1.
12.3. Bioaccumulative potential
12.1. Toxicity
The product is not considered harmful to aquatic organisms nor to cause long-term adverse effects in the environment.
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
12.6. Endocrine disrupting properties
12.7. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Prevent dispersion by covering with dry absorbent, Scoop solid spill into closing containers, Scoop absorbed substance into closing containers, Clean contaminated surfaces with an excess of water and soap solution, Wash clothing and equipment after handling
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product is compliant with major international chemical inventories. It is not subject to the Major Accidents Ordinance (12. BImSchV) in Germany. Specific restrictions apply in Denmark regarding young workers and pregnant/breastfeeding women.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for RADIA 4670?
The signal word is warning.
What is the physical form of RADIA 4670?
RADIA 4670 is a liquid appearing as liquid. with yellow. color. It has characteristic. sweet odour. odor.
What is the solubility of RADIA 4670?
Soluble in water. soluble in most organic solvents.
What is RADIA 4670 used for?
Industrial use Wide dispersive use
What are the hazard statements for RADIA 4670?
This substance has 1 hazard statement:
- H302: Harmful if swallowed.
What is the melting point of RADIA 4670?
The melting point is < 0 °C and the boiling point is > 150 °C (1 atm).