NEXBASE™ 3043

Remove person to fresh air and keep comfortable for breathing. Get medical attention if symptoms are severe or persist.

Symptoms: Unlikely to be hazardous by inhalation because of the low vapour pressure of the product at ambient temperature.

Remove contaminated clothing immediately and wash skin with soap and water. Get medical attention if irritation persists after washing.

Symptoms: Contact with hot product can cause serious thermal burns.

Rinse immediately with plenty of water. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if irritation persists after washing.

Symptoms: Oil mist: May cause eye irritation.

Do not induce vomiting. Get medical attention.

Symptoms: Entry into the lungs following ingestion or vomiting may cause chemical pneumonitis.

Water spray, foam, dry powder or carbon dioxide.

Do not use water jet as an extinguisher, as this will spread the fire.

Not known.

Avoid breathing mist. Wear adequate protective equipment at all operations. Prevent unauthorized access.

Small Spillages: Absorb spillage with sand or other inert absorbent.

Large spills should be collected mechanically (remove by pumping) for disposal.

Avoid release to the environment. Stop leak if safe to do so.

Immediately start clean-up of the liquid and contaminated soil.

Avoid heat, flames and other sources of ignition. Take precautionary measures against static discharges. Use only in well-ventilated areas. Avoid inhalation of vapours and contact with skin and eyes. Use personal protective equipment and/or local ventilation when needed.

Store in accordance with local regulations. Store in a demarcated bunded area to prevent release to drains and/or watercourses. Take precautions against leakage by constructing collecting pools and sewerage systems as well as by surfacing the loading and unloading stations. Store in tightly-closed, original container in a dry, cool and well-ventilated place. Protect from light.

Do not eat, drink or smoke when using this product. Wash hands and any other contaminated areas of the body with soap and water before leaving the work site.

Avoid heat, flames and other sources of ignition. Take precautionary measures against static discharges.

Use only in well-ventilated areas. Use personal protective equipment and/or local ventilation when needed.

Wear protective gloves. It is recommended that gloves are made of the following material: Polyvinyl chloride (PVC). Nitrile rubber. Change protective gloves regularly. Protective gloves according to standards EN 420 and EN 374.

Tight-fitting safety glasses.

Oil mist: Combination filter, type A2/P2. Filter device could be used maximum 2 hours at a time. Filter devices must not be used in conditions where the oxygen level is low (< 19 vol.-%). At high concentrations a breathing apparatus must be used (self-contained or fresh air hose breathing apparatus). Filter must be changed often enough. Respirators according to standards EN 140 and EN 141.

Protective clothing when needed. Wear anti-static protective clothing if there is a risk of ignition from static electricity.

Stable at normal ambient temperatures and when used as recommended.

There are no known reactivity hazards associated with this product.

No potentially hazardous reactions known.

Keep away from heat, sparks and open flame.

Strong acids. Oxidising agents.

Does not decompose when used and stored as recommended.

Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste Disposal Authority.

Dispose of this material and its container to hazardous or special waste collection point.