Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- HiTEC 6595 Fuel Additive
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Petrochemical industry: Fuel additive.
Uses advised against
Not available.
Manufacturers & Suppliers
Afton Chemical Corporation
manufacturer
500 Spring St., Richmond, VA 23219
+1-804-788-5800
Afton Chemical Limited
manufacturer
Euro-Tech Centre, London Road, Bracknell, Berkshire, RG12 2UW, England
+44 1344 304141
Emergency Contacts
Emergency Contact
+1-800-403-0044
Emergency Contact
+1-804-648-7727
Emergency Contact
+32-2-507-20-64
Emergency Contact
+81 345 789 341
Emergency Contact
+65 3158-1074
Emergency Contact
+86 10 5100 3039
Emergency Contact
+61 2801 44558
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Solvent naphtha (petroleum), heavy aromatic EC: 265-198-5 | 64742-94-5 | 30 - 60% | Yes |
| Polyolefin alkyl phenol alkyl amine | --- | 20 - 30% | Yes |
| Solvent naphtha (petroleum), light aromatic EC: 265-199-0 | 64742-95-6 | 5 - 9.9% | Yes |
| Benzene, 1,2,4-trimethyl- EC: 202-436-9 | 95-63-6 | 5 - 9.9% | Yes |
| Naphthalene | 91-20-3 | 5 - 9.9% | Yes |
| Benzene, 1,3,5-trimethyl- EC: 203-604-4 | 108-67-8 | 1 - 4.9% | Yes |
| 2-Ethyl hexanol EC: 203-234-3 | 104-76-7 | 1 - 4.9% | Yes |
| N-Propylbenzene EC: 203-132-9 | 103-65-1 | 0.5 - 0.99% | Yes |
| Cumene EC: 202-704-5 | 98-82-8 | 0.1 - 0.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention immediately.
In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention immediately.
Symptoms: swelling, redness
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention immediately.
Symptoms: Inflammation of the eye is characterized by redness, watering and itching.
DO NOT induce vomiting. If vomiting occurs naturally, have victim lean forward to reduce risk of aspiration. If affected person is fully conscious, give one glass of water to drink. Never give anything by mouth to an unconscious person. Get immediate medical attention.
Immediate Medical Attention
Get medical attention immediately.
Medical Treatment
Notes to physician: Not applicable.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
In case of fire, use water spray (fog), foam, dry chemical or CO₂.
Do not use water jet.
VAPOR MAY CAUSE FLASH FIRE. Vapors may accumulate in low or confined areas or travel a considerable distance to a source of ignition and flash back. Runoff to sewer may create fire or explosion hazard.
Firefighter Protection
Fire-fighters should wear positive pressure self-contained breathing apparatus (SCBA) and full turnout gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Immediately contact emergency personnel. Eliminate all ignition sources. Keep unnecessary personnel away. Use suitable protective equipment (section 8). Follow all fire-fighting procedures (section 5). Do not touch or walk through spilled material.
For small spills, add absorbent (soil may be used in the absence of other suitable materials) and use a non-sparking or explosion-proof means to transfer material to a sealable, appropriate container for disposal.
For large spills, dike spilled material or otherwise contain material to ensure runoff does not reach a waterway. Place spilled material in an appropriate container for disposal.
Avoid contact of spilled material with soil and prevent runoff entering surface waterways.
use a non-sparking or explosion-proof means to transfer material to a sealable, appropriate container for disposal.
Materials: absorbent (soil may be used in the absence of other suitable materials)
Related Products
Similar products with comparable safety profiles
HiTEC® 6599M Fuel Additive
---
HiTEC® 6596M Fuel Additive
UFI: HVHK-3DST-HT61-AGNN
HiTEC® 66105 Fuel Additive
UFI: HKNP-40H5-300T-0VQG
HiTEC® 66145M Fuel Additive
UFI: 39RS-G03S-M00M-JHFE
HiTEC 4679 Fuel Additive
---
HiTEC® 6595M Gasoline Additive
---
HiTEC® 6595M Gasoline Additive
UFI: Q0SF-HWSX-2Y46-FJN2
HiTEC® 6595M Gasoline Additive
UFI: Q0SF-HWSX-2Y46-FJN2
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Keep container closed. Use only with adequate ventilation. Avoid breathing vapor or mist. Keep away from heat, sparks and flame. Wash thoroughly after handling.
Keep container in a well-ventilated area. Keep container tightly closed and sealed until ready for use. Avoid all possible sources of ignition (spark or flame).
Wash thoroughly after handling.
Keep away from heat, sparks and flame. Dissipate static electricity during transfer by grounding and bonding containers and equipment before transferring material.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable.
No specific test data related to reactivity available for this product or its ingredients.
Not determined.
High temperatures, sparks, and open flames.
Strong oxidizing and reducing agents.
Decomposition products may include the following materials: carbon dioxide, carbon monoxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Toxicity
Toxicity
Toxicity
Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Persistence and degradability
Persistence and degradability
Persistence and degradability
Bioaccumulative potential
Mobility in soil
Results of PBT and vPvB assessment
Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste must be disposed of in accordance with federal, state and local environmental control regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1993
- Shipping Name
- FLAMMABLE LIQUIDS, N.O.S. (Solvent naphtha; Trimethylbenzenes)
- Transport Class
- 3
- Packing Group
- III
Marine pollutant
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This product contains substances for which Chemical Safety Assessments are still required.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for HiTEC 6595 Fuel Additive?
The signal word is na: r-phrases.
What is the physical form of HiTEC 6595 Fuel Additive?
HiTEC 6595 Fuel Additive is a liquid. [oily liquid.] appearing as clear. amber. with clear. amber. color. It has aromatic. odor.
What is HiTEC 6595 Fuel Additive used for?
Petrochemical industry: Fuel additive.
What is the melting point of HiTEC 6595 Fuel Additive?
The melting point is -20°C and the boiling point is 150 - 215°C.