Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PUREBASE®4
- Product Code
- n. a.
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Base oil
Manufacturers & Suppliers
PURAGLOBE Germany GmbH
manufacturer
Hauptstraße 30, 06729 Elsteraue, Germany
+49(0)3441 / 22 815 925
Emergency Contacts
Emergency Contact
+49(0)361-730 730
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst EC: 265-157-1 | 64742-54-7 | --- | No |
The harmonized classification of this substance (H350) is no longer applicable because the concentration limits are complied with according to the CLP regulation The harmonized classification of this substance (H304) is no longer applicable, because the viscosity is >20,5 mm2/s.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air.
Remove contaminated clothing. Cleanse affected areas thoroughly by washing with soap and water. Clean contaminated clothing before re-use.
Flush eyes immediately with plenty of water.
If swallowed, do not induce vomiting.
Immediate Medical Attention
Seek medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry powder, carbon dioxide, water spray jet, sand
Full water jet
Formation of ignitable vapors / gases is possible. Hot product may produce flammable vapors.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Take up with absorbent material smaller amounts of spilled material.
Prevent spilled material from entering canalisation or aquatic environment.
If possible, skim off spill or absorb into an appropriate absorbent material. Dig out contaminated soil and dispose according to regulation (waste act).
Materials: absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not eat or drink while handling the product; avoid oil nebulisation, material spilling and local overheating. Keep away from sources of ignition. Hot product develops inflammable vapours.
Store in well-ventilated areas. Avoid direct exposure to heat and light. Do not store at high temperatures.
Do not eat or drink while handling the product.
Keep away from sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide for good ventilation
Gloves (oil-resistant)
Safety goggles
No particular respiratory protection required in well-ventilated areas. Use respiratory protection for tank cleaning
Long-sleeved protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.
Reaction with strong oxidising agents
None known hazardous decomposition products
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Ecological Toxicity
12.2. Mobility
The product is not readily biodegradable.
12.2. Mobility
The product is hardly soluble in water.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The anticipated waste code No. is considered being a recommendation. If necessary, final assignment is to be made in coordination with the competent authority. The disposal information makes reference to this product and its residues resulting from the intended use. However, individual assessment is necessary if mixed with other materials or preparations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PUREBASE®4?
The signal word is no signal word.
What is the physical form of PUREBASE®4?
PUREBASE®4 is a liquid with l 0.5 – 2.0 color. It has – odor.
What is the solubility of PUREBASE®4?
n.av.
What is PUREBASE®4 used for?
Base oil