Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DIETHYLENE GLYCOL
Regulatory Identifiers
- CAS Number
- 111-46-6 Check regulations →
- EC Number
- 203-872-2 Check regulations →
- REACH No.
- 01-21194578 XXXX
Identified Uses
Industrial uses, Professional use, Consumer use see attached exposure scenario.
Manufacturers & Suppliers
Przedsiębiorstwo Produkcyjno-Handlowe "Chemia - Bomar" Edward Marciniak
manufacturer
49 – 345 Skorogoszcz, Chróścina 6C
+48 77 4121-033
http://www.plyny.pl
Emergency Contacts
Pomorskie Centrum Toksykologii Gdańsk
+48 58 682 04 04
Biuro Informacji Toksykologicznej Warszawa
+48 22 619 66 54
Ośrodek Informacji Toksykologicznej Poznań
+48 61 847 69 46
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Diethylene glycol EC: 203-872-2 | 111-46-6 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Keep at rest. Move to fresh air. Consult a physician if necessary.
Symptoms: May cause irritation of respiratory tract.
Wash with plenty of soap and water. Take off contaminated clothing and shoes immediately. Wash contaminated clothing before reuse. Consult a physician if necessary.
Symptoms: May be irritating.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Call a physician immediately.
Symptoms: Contact with eyes may cause irritation.
Do NOT induce vomiting. Rinse mouth with water. Never give anything by mouth to an unconscious person. Call a physician immediately.
Symptoms: Harmful if swallowed. Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhoea. Higher exposure : Central nervous system depression, headache, dizziness . Impaired consciousness Bloody vomiting . May cause damage to kidneys through prolonged or repeated exposure if swallowed.
Immediate Medical Attention
Call a physician immediately.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Alcohol-resistant foam, Aqueous film forming foam (AFFF), BC-powder .
High volume water jet
Combustible material. Fire or intense heat may cause violent rupture of packages. Exothermic reaction with acids. / Bases.
Cool containers / tanks with water spray.
Firefighter Protection
Evacuate personnel to safe areas.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Wear personal protective equipment. Do not breathe vapours or spray mist. Avoid contact with skin, eyes and clothing. Keep away from open flames, hot surfaces and sources of ignition.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Sweep up and shovel into suitable containers for disposal. Clean contaminated surfaces with an excess of water
Dam up. Large spills should be collected mechanically (remove by pumping) for disposal.
Do not flush into surface water or sanitary sewer system. Prevent product from entering drains.
Prevent further leakage or spillage if safe to do so.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure adequate ventilation. Avoid contact with skin, eyes and clothing. Do not breathe vapours or spray mist. Always replace cap after use. Do not burn, or use a cutting torch on, the empty drum. Do not puncture or incinerate.
Keep tightly closed in a dry, cool and well-ventilated place.
Use only in area provided with appropriate exhaust ventilation. Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feedingstuffs. Wash hands and face before breaks and immediately after handling the product. Remove and wash contaminated clothing before re-use.
Keep away from heat and sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions., hygroscopic
Combustible material
Reacts vigorously with strong oxidizers and acids. Fire hazard. Combustion/explosion hazards
Heat, flames and sparks. Remove all sources of ignition.
Incompatible with strong bases and oxidizing agents. Peroxides
Carbon oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.4. Mobility in soil
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.5. Results of PBT and vPvB assessment
The substance is not considered to be persistent, bioaccumulating, or toxic (PBT), nor is it considered to be very persistent or very bioaccumulating (vPvB).
12.6. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Where possible recycling is preferred to disposal or incineration. (Distillation). Collect and dispose of waste product at an authorised disposal facility.
Collect and dispose of waste product at an authorised disposal facility.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DIETHYLENE GLYCOL?
The signal word is warning.
What is the physical form of DIETHYLENE GLYCOL?
DIETHYLENE GLYCOL is a liquid appearing as liquid with clear color. It has characteristic odor.
What is DIETHYLENE GLYCOL used for?
Industrial uses, Professional use, Consumer use see attached exposure scenario.
What are the hazard statements for DIETHYLENE GLYCOL?
This substance has 2 hazard statements:
- H302: Harmful if swallowed.
- H373: May cause damage to organs through prolonged or repeated exposure.
What is the melting point of DIETHYLENE GLYCOL?
The melting point is ~ -8 - -10 °C and the boiling point is 242 - 252 °C.