Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Adigraf Water Based Block Printing White
- Product Code
- D185xxx011
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Art supplies and hobby preparations
Uses advised against
None known.
Manufacturers & Suppliers
Daler-Rowney Ltd.
manufacturer
Peacock Lane Bracknell, RG12 8ST Bracknell, United Kingdom
+44 1344 461 156
http://www.daler-rowney.com
Emergency Contacts
The National Poisons Information Service (NPIS)
0344 892 0111
24 hour service
NHS 111
111
24 hour service
NHS 24
112
24 hour service
NHS Direct
111
24 hour service
NHS Direct
0845 4647
24 hour service
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1,2-benzisothiazol-3(2H)-one;1,2-benzisothiazolin-3-one EC: 220-120-9 | 2634-33-5 | 0.05% | Yes |
| 3-iodo-2-propynyl butylcarbamate;3-iodoprop-2-yn-1-yl butylcarbamate EC: 259-627-5 | 55406-53-6 | 0.05% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of discomfort: bring the person into fresh air.
Upon irritation: rinse with water. In the event of continued irritation, seek medical assistance.
Rinse gently with lukewarm water. Remove any contact lenses if this is easy to do. Continue rinsing.
Rinse and flush mouth thoroughly and consume large quantities of water. In case of continued discomfort: seek medical assistance and bring this safety data sheet.
Immediate Medical Attention
Contact a doctor or casualty department – take the label or this safety data sheet. Contact a doctor if in doubt about the injured person's condition or if the symptoms persist.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol-resistant foam, carbon dioxide, powder, water mist.
Waterjets should not be used, since they can spread the fire.
Fire will result in dense smoke. Exposure to combustion products may harm your health.
Closed containers, which are exposed to fire, should be cooled with water.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation, especially in confined areas. Contaminated areas may be slippery.
Avoid discharge to lakes, streams, sewers, etc.
Wherever possible cleaning should be performed with normal cleaning agents. Avoid use of solvents.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact during pregnancy and while nursing.
No specific requirements
Smoking, drinking and consumption of food is not allowed in the work area.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The formation of vapours must be kept at a minimum and below current limit values (see above). Installation of a local exhaust system if normal air flow in the work room is not sufficient is recommended. Ensure eyewash and emergency showers are clearly marked.
Material: Nitrile, Glove thickness (mm): 2,0, Breakthrough time (min.): >480, Standards: EN374-2, EN374-3, EN388, EN407
Safety glasses with side shields. Standards: EN166
Respiratory protection is not needed in the event of adequate ventilation.
Wear appropriate protection clothing, e.g. coveralls in polypropylene or working clothes in cotton or polyester.
No specific requirements.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under the conditions, noted in section 7 "Handling and storage".
No data available.
None known.
None known.
Strong acids, strong bases, strong oxidizing agents, and strong reducing agents.
Under normal conditions of storage and use, hazardous decomposition products should not be produced
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
No data available.
12.2. Persistence and degradability
Based on available data, the classification criteria are not met.
12.3. Bioaccumulative potential
Based on available data, the classification criteria are not met.
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
The mixture does not contain any substances known to fulfil the criteria for PBT and vPvB classification.
12.6. Endocrine disrupting properties
The mixture does not contain any substances considered to have endocrine-disrupting properties in relation to the environment.
12.7. Other adverse effects
None known.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Product is not covered by regulations on dangerous waste.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Pregnant women and women breastfeeding must not be exposed to this product. The risk, and possible technical precautions or design of the workplace needed to eliminate exposure, must be considered.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Adigraf Water Based Block Printing White?
The signal word is no signal word.
What is the physical form of Adigraf Water Based Block Printing White?
Adigraf Water Based Block Printing White is a liquid with no relevant or available data due to the nature of the product. color. It has no relevant or available data due to the nature of the product. odor.
What is the solubility of Adigraf Water Based Block Printing White?
No relevant or available data due to the nature of the product.
What is Adigraf Water Based Block Printing White used for?
Art supplies and hobby preparations
What is the melting point of Adigraf Water Based Block Printing White?
The melting point is No relevant or available data due to the nature of the product. and the boiling point is No relevant or available data due to the nature of the product..