Fixativ

Upon breathing difficulties or irritation of the respiratory tract: Bring the person into fresh air and stay with him/her.

Remove contaminated clothing and shoes immediately. Ensure to wash exposed skin thoroughly with water and soap. Skin cleanser can be used. DO NOT use solvents or thinners. For burns: Rinse with water until pain stops then continue to rinse for 30 minutes.

Symptoms: Repeated exposure to solvents can result in the breaking down of the skin's natural fat layer and may result in an increased absorption potential of other hazardous substances at the area of exposure.

If in eyes: Flush eyes with water or saline water (20-30 °C) for at least 5 minutes. Remove contact lenses. Seek medical assistance and continue flushing during transport.

If the person is conscious, rinse the mouth with water and stay with the person. Never give the person anything to drink. Do not induce vomiting, unless recommended by the doctor. Have the person lean forward with head down to avoid inhalation of or choking on vomited material.

Symptoms: malaise

Alcohol-resistant foam, carbon dioxide, powder, water mist.

Waterjets should not be used, since they can spread the fire.

Highly flammable liquid and vapour. In use may form flammable/explosive vapour-air mixture. Fire will result in dense smoke. Exposure to combustion products may harm your health. Closed containers, which are exposed to fire, should be cooled with water.

Closed containers, which are exposed to fire, should be cooled with water.

Storages not yet ignited must be cooled by water mist. Remove flammable materials if conditions allow it. Contaminated areas may be slippery.

Avoid discharge to lakes, streams, sewers, etc.

cleaning should be performed with normal cleaning agents. Avoid use of solvents.

Use non-sparking tools. Take action to prevent static discharges. Avoid contact during pregnancy and while nursing.

Dry, cool and well ventilated. Room temperature 15 to 25°C

Smoking, drinking and consumption of food is not allowed in the work area.

Ground and bond container and receiving equipment. Use non-sparking tools. Take action to prevent static discharges.

Apply standard precautions during use of the product. Avoid inhalation of vapours.

Material: Nitrile, Glove thickness: 2,0 mm, Breakthrough time: >480 min., Standards: EN374-2, EN374-3, EN388, EN407

No specific requirements.

Respiratory protection is not needed in the event of adequate ventilation.

Wear appropriate protection clothing, e.g. coveralls in polypropylene or working clothes in cotton or polyester.

No specific requirements.

The product is stable under the conditions, noted in section 7 "Handling and storage".

No data available.

None known.

Avoid static electricity. Do not expose to any forms of heat (e.g. solar radiation). May lead to excess pressure.

Strong acids, strong bases, strong oxidizing agents, and strong reducing agents.

The product is not degraded when used as specified in section 1.

Dispose of contents/container to an approved waste disposal plant.

Dispose of contents/container to an approved waste disposal plant.