Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- KELTROL® ADVANCED PERFORMANCE RD
- Chemical Name
- Xanthan gum
Regulatory Identifiers
- CAS Number
- 11138-66-2 Check regulations →
- EC Number
- 234-394-2 Check regulations →
Identified Uses
Food additive Stabilizer Thickening agent
Uses advised against
None known.
Manufacturers & Suppliers
CP Kelco France
manufacturer
123 rue Jules Guesde, 92300 Levallois-Perret, France
+33 1 49 03 78 00
http://www.cpkelco.com
Emergency Contacts
CHEMTREC
+1 800 424 9300
CHEMTREC
+1 703 527 3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Xanthan gum EC: 234-394-2 | 11138-66-2 | --- | No |
Notes
Exempt or - : this substance or its uses are exempted from REACH registration or no REACH registration obligation as annual tonnage <1tpa.
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing.
Wash with plenty of soap and water.
Symptoms: Contact with dust can cause mechanical irritation or drying of the skin.
In case of eye contact, remove contact lens and rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Symptoms: Dust contact with the eyes can lead to mechanical irritation.
Rinse mouth thoroughly with water.
Immediate Medical Attention
Treat symptomatically.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog). Dry chemical. Carbon dioxide (CO2). Foam.
None known.
Avoid dust formation.
Firefighter Protection
Wear a self-contained breathing apparatus and chemical protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Avoid dust formation. Keep unauthorized personnel away. Slippery, can cause falls if walked on.
Vacuum or sweep material and place in a disposal container
Do not dry sweep dust. Wet dust with water before sweeping or use a vacuum to collect dust
Dispose of in accordance with federal, state and local regulations.
Related Products
Similar products with comparable safety profiles
KELTROL® F
---
DERTOLINE® R
---
HiTEC® 11170 Performance Additive
UFI: TXUR-J2EY-MT6F-A4C5
HiTEC® 611 Performance Additive
UFI: P23V-M161-F00E-3XJR
HiTEC® 340 Performance Additive
UFI: FFRA-A9AQ-HT21-VCP5
HiTEC® 340 Performance Additive
UFI: FFRA-A9AQ-HT21-VCP5
HiTEC® 343 Performance Additive
UFI: P3KE-NQVK-QF2U-0VT1
HiTEC® 11183 Performance Additive
UFI: DCJS-J0GD-G00F-WY7Y
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Minimize dust generation and accumulation. Avoid significant deposits of material, especially on horizontal surfaces, which may become airborne and form combustible dust clouds and may contribute to secondary explosions. This material can be ignited by heat, sparks, flames, or other sources of ignition (e.g., static electricity, pilot lights, mechanical/electrical equipment, and electronic devices such as cell phones, computers, calculators, and pagers which have not been certified as intrinsically safe). Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Avoid contact with skin, eyes or clothing. Avoid prolonged contact with material. Use personal protection recommended in Section 8. Employ good industrial hygiene practice.
Keep container tightly closed and dry.
Employ good industrial hygiene practice.
Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Avoid sources of ignition (e.g., static electricity, pilot lights, mechanical/electrical equipment, and electronic devices such as cell phones, computers, calculators, and pagers which have not been certified as intrinsically safe).
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas. Provide a good standard of controlled ventilation (10 to 15 air changes per hour).
Wear suitable gloves.
Wear safety glasses with side shields (or goggles).
In case of inadequate ventilation wear respiratory protection.
Wear suitable protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions
Hazardous polymerization does not occur
Dust formation. Keep away from heat, sparks and flame.
Strong oxidizing agents.
None known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Ecotoxicity
12.1. Ecotoxicity
12.2. Persistence and degradability
Readily biodegradable.
12.3. Bioaccumulative potential
No data available.
12.4. Mobility in soil
No data available.
12.5. Results of PBT and vPvB assessment
The substance does not meet the criteria for PBT or vPvB classification.
12.6. Other adverse effects
None known
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste product or used containers according to local regulations
Dispose of waste product or used containers according to local regulations
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for KELTROL® ADVANCED PERFORMANCE RD?
The signal word is no signal word.
What is the physical form of KELTROL® ADVANCED PERFORMANCE RD?
KELTROL® ADVANCED PERFORMANCE RD is a solid with white to tan, uniform in appearance color. It has odorless odor.
What is KELTROL® ADVANCED PERFORMANCE RD used for?
Food additive Stabilizer Thickening agent
What is the melting point of KELTROL® ADVANCED PERFORMANCE RD?
The melting point is Not applicable and the boiling point is Not applicable.