NextSDS Logo
Safety Data Sheet EN

2-Ethoxy-1-propanol

CAS 19089-47-5

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
2-Ethoxy-1-propanol
Product Code
2L8A
Chemical Name
2-Ethoxy-1-propanol

Regulatory Identifiers

CAS Number
19089-47-5 Check regulations →

Identified Uses

Laboratory and analytical use Laboratory chemical

Uses advised against

Do not use for private purposes (household). Food, drink and animal feedingstuffs.

Manufacturers & Suppliers

Carl Roth GmbH + Co. KG logo

Carl Roth GmbH + Co. KG

manufacturer

Schoemperlenstr. 3-5, D-76185 Karlsruhe, Germany

+49 (0) 721 - 56 06 0

http://www.carlroth.de

Emergency Contacts

National Poisons Information Centre Beaumont Hospital

+353 1 809 2166

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Flam. Liq. Cat. 3 H226

GHS Pictograms

GHS02 - Flammable

GHS02

Hazard Statements

H226 Flammable liquid and vapour

Precautionary Statements

P261 Avoid breathing mist/vapours
P280 Wear protective clothing/eye protection

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Molecular formula C5H12O2; Molar mass 104,2 g/mol; CAS No 19089-47-5

Chemical Name CAS Number Concentration Hazardous
2-Ethoxy-1-propanol 19089-47-5 95% No

2-Ethoxy-1-propanol ≥95 % article number: 2L8A ROTH

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Provide fresh air. In all cases of doubt, or when symptoms persist, seek medical advice.

Skin contact

Rinse skin with water/shower. In all cases of doubt, or when symptoms persist, seek medical advice.

Eye contact

Rinse cautiously with water for several minutes. In all cases of doubt, or when symptoms persist, seek medical advice.

Ingestion

Rinse mouth. Call a doctor if you feel unwell.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

co-ordinate firefighting measures to the fire surroundings! water spray, dry extinguishing powder, BC-powder, carbon dioxide (CO₂)

Unsuitable media

water jet

Specific hazards

Combustible. In case of insufficient ventilation and/or in use, may form flammable/explosive vapour-air mixture. Solvent vapours are heavier than air and may spread along floors. Places which are not ventilated, e.g. unventilated below ground level areas such as trenches, conduits and shafts, are particularly prone to the presence of flammable substances or mixtures. Vapours may form explosive mixtures with air.

Instructions

Fight fire with normal precautions from a reasonable distance.

Firefighter Protection

Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

For non-emergency personnel: Avoid contact with skin, eyes and clothes. Do not breathe vapour/spray.

Environmental

Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.

Cleanup methods

Absorb with liquid-binding material (sand, diatomaceous earth, acid- or universal binding agents).

Materials: sand, diatomaceous earth, acid- or universal binding agents

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Provision of sufficient ventilation. Keep away from sources of ignition - No smoking. Take precautionary measures against static discharge. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting/equipment. Use only non-sparking tools.

Storage

Keep container tightly closed.

Hygiene

Wash hands before breaks and after work. Keep away from food, drink and animal feedingstuffs. When using do not smoke.

Fire prevention

Keep away from sources of ignition - No smoking. Take precautionary measures against static discharge. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting/equipment. Use only non-sparking tools.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. The times are approximate values from measurements at 22 °C and permanent contact. Increased temperatures due to heated substances, body heat etc. and a reduction of the effective layer thickness by stretching can lead to a considerable reduction of the breakthrough time. If in doubt, contact manufacturer. At an approx. 1.5 times larger / smaller layer thickness, the respective breakthrough time is doubled / halved. The data apply only to the pure substance. When transferred to substance mixtures, they may only be considered as a guide. NBR (Nitrile rubber) >0,11 mm >480 minutes (permeation: level 6)

Eyes

Use safety goggle with side protection.

Respiratory

Respiratory protection necessary at: Aerosol or mist formation. Type: A (against organic gases and vapours with a boiling point of > 65 °C, colour code: Brown).

Skin/Body

Take recovery periods for skin regeneration. Preventive skin protection (barrier creams/ointments) is recommended.

Environmental

Keep away from drains, surface and ground water.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
not determined
Colour Intensity
---
Form
---
Odor
this information is not available
Odor Threshold
---
Ph
not determined
Melting Point
not determined
Boiling Point
137,5 °C at 1.013 hPa
Flash Point
45,9 °C at 1.013 hPa
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
not determined
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
0,904 g/cm³ at 20 °C
Flammability
flammable liquid in accordance with GHS criteria
Upper Explosive Limit
not determined
Lower Explosive Limit
not determined
Explosive Limits
---
Auto Ignition Temperature
not determined
Decomposition Temperature
not relevant
Solubility
---
Partition Coefficient
this information is not available
Solubility In Water
not determined
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
not determined
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.

Reactivity

It's a reactive substance. Risk of ignition.

Hazardous reactions

If heated: Risk of ignition. Vapours may form explosive mixtures with air.

Avoid

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

Incompatible

There is no additional information.

Decomposition

Hazardous combustion products: see section 5.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

Shall not be classified as hazardous to the aquatic environment.

12.2 Persistence and degradability

Theoretical Oxygen Demand: 2,151 mg/mg Theoretical Carbon Dioxide: 2,113 mg/mg

12.3 Bioaccumulative potential

Data are not available.

12.4 Mobility in soil

Data are not available.

12.5 Results of PBT and vPvB assessment

According to the results of its assessment, this substance is not a PBT or a vPvB.

The substance is not a PBT or a vPvB.

12.6 Endocrine disrupting properties

Does not contain an endocrine disruptor (ED) at a concentration of ≥ 0,1%.

Does not contain an endocrine disruptor (ED) at a concentration of ≥ 0,1%.

12.7 Other adverse effects

Data are not available.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of contents/container in accordance with local/regional/national/international regulations.

Disposal

This material and its container must be disposed of as hazardous waste.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3271
Shipping Name
ETHERS, N.O.S.
Transport Class
3
Packing Group
III
ADR

Provisions for dangerous goods (ADR) should be complied within the premises.

IMDG

223, 274

IATA

Limited quantities (LQ) 10 L

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Safety, health and environmental regulations/legislation specific for the substance or mixture

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 2-Ethoxy-1-propanol?

The signal word is warning.

What is the physical form of 2-Ethoxy-1-propanol?

2-Ethoxy-1-propanol is a liquid with not determined color. It has this information is not available odor.

What is 2-Ethoxy-1-propanol used for?

Laboratory and analytical use Laboratory chemical

What are the hazard statements for 2-Ethoxy-1-propanol?

This substance has 1 hazard statement:

  • H226: Flammable liquid and vapour

What is the melting point of 2-Ethoxy-1-propanol?

The melting point is not determined and the boiling point is 137,5 °C at 1.013 hPa.