Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SASOLWAX(TM) FT Hard waxes
- Synonyms
- SASOLWAX™: B46, B55, C80, C80CB, C80M, C80MN7, C80N6, C80N8, C105, C105CB, H8DB, CM700, H1, H1CB, H1N6, H1N6CB, H5, H8, H8EGTL, H105, HM028, HWS, 1655, C80U, H5CP, FT 170, C80MN8, H1-N8, H1-N4, EXP1581, EXP 1583, L6800, WPR01.
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial use.
Manufacturers & Suppliers
Sasol Chemicals, a division of Sasol South Africa Ltd
manufacturer
Sasol Place, 50 Katherine Street, Sandton, 2090, South Africa
+27103445000
Emergency Contacts
Europe, Israel, Africa, Americas
+44 (0)1235 239 670
Middle East, Arabic African countries
+44(0)1235 239 671
Asia Pacific
+65 3158 1074
China
+86 400 120 6011
South Africa
+27 (0)17 610 4444
RSA-Local only
0800 112 890
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Synthetic wax, Paraffinic hydrocarbons
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Synthetic wax, Paraffinic hydrocarbons EC: 232-315-6 | 8002-74-2 | 100% | No |
Notes
Not a hazardous ingredient
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air in case of accidental inhalation of vapours.
Cool melted product on skin with plenty of water. Do not remove solidified product. In case of burns by molten product, medical treatment is needed.
Rinse with water. If eye irritation persists, consult a specialist.
Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.
Immediate Medical Attention
In case of burns by molten product, medical treatment is needed. If symptoms persist, call a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Dry powder.
Water spray.
Avoid contamination with oxidising agents.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Control personal contact with the substance, by using protective equipment.
Prevent release into the environment.
Allow to solidify. Clean up all spills immediately.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide sufficient air exchange and/or exhaust in work rooms.
Keep in a dry, cool place.
Keep away from open flames, hot surfaces and sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide sufficient air exchange and/or exhaust in work rooms.
Gloves suitable for permanent contact.: - Material: butyl-rubber - Break through time: 4 h - Material thickness: 0.5 mm
Safety glasses
In case of insufficient ventilation, wear suitable respiratory equipment.
Overalls. PVC protective suit may be required if exposure is severe.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Stable under recommended storage conditions.
Hazardous polymerisation does not occur.
Heat.
Oxidizing agents. Strong acids
No data available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is SASOLWAX(TM) FT Hard waxes known by?
SASOLWAX(TM) FT Hard waxes is also known as: SASOLWAX™: B46, B55, C80, C80CB, C80M, C80MN7, C80N6, C80N8, C105, C105CB, H8DB, CM700, H1, H1CB, H1N6, H1N6CB, H5, H8, H8EGTL, H105, HM028, HWS, 1655, C80U, H5CP, FT 170, C80MN8, H1-N8, H1-N4, EXP1581, EXP 1583, L6800, WPR01.
What is the hazard signal word for SASOLWAX(TM) FT Hard waxes?
The signal word is no signal word.
What is the physical form of SASOLWAX(TM) FT Hard waxes?
SASOLWAX(TM) FT Hard waxes is a solid with white to pale brown color. It has odourless odor.
What is SASOLWAX(TM) FT Hard waxes used for?
Industrial use.
What is the melting point of SASOLWAX(TM) FT Hard waxes?
The melting point is > 75 °C and the boiling point is > 370 °C.