Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- AMMONIUM BISULPHITE SOLUTION
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- GCUE-409D-V00K-S94X
Identified Uses
FOR INDUSTRIAL USE FOOD ADDITIVE REDUCING AGENT FOR PROFESSIONAL USE See attached exposure scenario.
Uses advised against
N.A.
Manufacturers & Suppliers
ESSECO S.r.l.
manufacturer
Via San Cassiano 99 28069 - Trecate (NO) Italy
+39-0321-7901
Emergency Contacts
Esseco
+39-0321-7901
Emergency Contact
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| AMMONIUM BISULPHITE EC: 233-469-7 | 10192-30-0 | 60 - 70% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest.
Immediately take off all contaminated clothing. After contact with skin, wash immediately with soap and plenty of water.
Symptoms: persistent skin irritation
Irrigate eyes with copious amounts of water for at least 10-15 min, holding eyelids apart to ensure thorough rinsing. Protect uninjured eye.
Symptoms: irritation, blurred vision or swelling
Do not induce vomiting, get medical attention showing the SDS and label hazardous.
Immediate Medical Attention
In case of persistent skin irritation consult a doctor. Ask for medical advice. If irritation, blurred vision or swelling occurs and persists, obtain medical advice from a specialist. Get medical attention showing the SDS and label hazardous.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water. CO2 or Dry chemical fire extinguisher. Foaming. According to the materials involved in the fire.
None in particular.
Produces oxides of sulphur and nitrogen on combustion
Move undamaged containers from immediate hazard area if it can be done safely.
Firefighter Protection
Wear suitable protective clothing (helmet, protective clothings, goggles, fire resistant gloves, boots) and protect respiratory organs (self contained breathing apparatus).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear personal protection equipment. Remove persons to safety. See protective measures under point 7 and 8.
Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes, inhalation of vapours and mists. Don't use empty container before they have been cleaned. Before making transfer operations, assure that there aren't any incompatible material residuals in the containers.
Keep this product in a dry place. Keep away from unguarded flame, sparks, and heat sources. Avoid direct exposure to sunlight. Adequately ventilated premises.
Contaminated clothing should be changed before entering eating areas. Do not eat or drink while working.
Keep away from unguarded flame, sparks, and heat sources.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear suitable gloves tested to EN374. Suitable material: NBR (nitrile rubber) (Recommended thickness of the material: 0.4 mm; Permeation time: > 480 min). Contact the glove manufacturer for specific advice on glove selection and breakthrough times for your use conditions.
Safety goggles with side protection and protective shield. Technical reference standard: UNI EN 166
Depending on the potential for exposure, select respiratory protective equipment suitable for the specific conditions of use and in compliance with current legislation. Half-face mask with combined filter. Technical reference standard for filters to be used in the presence of gases and vapours: UNI EN 14387. Combined filter: B/K-P2 (grey-green-white colour). Filter mask FFP2/FFP3 for solid particles. Technical reference standard: UNI EN 149
Wear chemical resistant clothing. Technical reference standard: UNI EN 13034. Wear chemical resistant safety shoes. Technical reference standard: UNI EN 20345
Comply with the applicable environmental regulations limiting discharge to air, water and soil.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under normal conditions
Stable under normal conditions.
Keep away from heat and direct sunlight.
Acids, Oxidants.
Toxic gases, Sulphur dioxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.1. Toxicity
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
No PBT, vPvB or endocrine disruptor substances present in concentration >= 0.1%
12.6. Endocrine disrupting properties
No endocrine disruptor substances present in concentration >= 0.1%
12.7. Other adverse effects
N.A.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Recover if possible. In so doing, comply with the local and national regulations currently in force.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Regulation (EU) n. 2020/878, Regulation (EC) n. 1907/2006 (REACH), Regulation (EC) n. 1272/2008 (CLP), Dir. 98/24/EC
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for AMMONIUM BISULPHITE SOLUTION?
The signal word is warning.
What is the physical form of AMMONIUM BISULPHITE SOLUTION?
AMMONIUM BISULPHITE SOLUTION is a liquid with yellow color. It has pungent odor.
What is AMMONIUM BISULPHITE SOLUTION used for?
FOR INDUSTRIAL USE FOOD ADDITIVE REDUCING AGENT FOR PROFESSIONAL USE See attached exposure scenario.
What are the hazard statements for AMMONIUM BISULPHITE SOLUTION?
This substance has 1 hazard statement:
- H319: Causes serious eye irritation.
What is the melting point of AMMONIUM BISULPHITE SOLUTION?
The melting point is N.A. and the boiling point is ±105°C.