Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- RADIA 6123
- Product Form
- Substance (UVCB)
Regulatory Identifiers
- CAS Number
- 164250-88-8 Check regulations →
- EC Number
- 809-905-2 Check regulations →
Identified Uses
Lubricating oil: vegetal product
Uses advised against
No additional information available
Manufacturers & Suppliers
OLEON N.V.
manufacturer
Assenedestraat 2, 9940 Ertvelde - Belgium
+32 9 341 10 11
http://www.oleon.com
Emergency Contacts
SGS ERS
+32 3 575 55 55
24/7
SGS ERS
+1 888 765 6554
24/7
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sunflower oil, oleic acid-high EC: 809-905-2 | 164250-88-8 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the victim into fresh air. Respiratory problems: consult a doctor/medical service.
Wash immediately with lots of water. Soap may be used. Take victim to a doctor if irritation persists.
Rinse immediately with plenty of water. Take victim to an ophthalmologist if irritation persists.
Rinse mouth with water. Call Poison Information Centre (www.who.int/ipcs/poisons/centre/directory/en). Consult a doctor/medical service if you feel unwell.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
AFFF foam. BC powder. Carbon dioxide. Dry sand. Dry chemical powder. Adapt extinguishing media to the environment.
Solid water jet ineffective as extinguishing medium.
DIRECT FIRE HAZARD: Combustible. INDIRECT FIRE HAZARD: Heating increases the fire hazard. Temperature above flashpoint: higher fire/explosion hazard. No direct explosion hazard.
Cool tanks/drums with water spray/remove them into safety.
Firefighter Protection
Heat/fire exposure: compressed air/oxygen apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Mark the danger area. No naked flames. Wash contaminated clothes.
Mark the danger area.
Clean contaminated surfaces with an excess of water and soap solution. Take up liquid spill into inert absorbent material.
Materials: dry sand/earth/vermiculite or powdered limestone
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from naked flames/heat. In finely divided state: use spark-/explosionproof appliances. Finely divided: keep away from ignition sources/sparks. Measure the concentration in the air regularly. Carry operations in the open/under local exhaust/ventilation or with respiratory protection. Comply with the legal requirements. Clean contaminated clothing. Keep the substance free from contamination. Do not discharge the waste into the drain. Keep container tightly closed.
Keep container tightly closed.
Clean contaminated clothing. Keep the substance free from contamination.
Keep away from naked flames/heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Gloves
Safety glasses
Respiratory protection not required in normal conditions
Protective clothing. Materials for protective clothing: GIVE GOOD RESISTANCE: nitrile rubber
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
On burning: release of (carbon monoxide - carbon dioxide).
No additional information available
No supplementary information available.
No supplementary information available.
No supplementary information available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.2. Persistence and degradability
12.2. Persistence and degradability
Biodegradable in water.
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
12.6. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Prevent dispersion by covering with dry absorbent, Scoop solid spill into closing containers, Scoop absorbed substance into closing containers, Clean contaminated surfaces with an excess of water and soap solution, Wash clothing and equipment after handling
Affects self-cleaning capacity of effluent. Use appropriate containment to avoid environmental contamination. Remove to an authorized incinerator equipped with an afterburner and a flue gas scrubber with energy recovery. May be discharged to wastewater treatment installation.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Regulatory information for RADIA 6123, including compliance with international chemical inventories and specific EU/National regulations.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for RADIA 6123?
The signal word is no signal word.
What is the physical form of RADIA 6123?
RADIA 6123 is a liquid appearing as liquid. with light yellow to dark yellow. color. It has characteristic odour. sweet odour. odor.
What is the solubility of RADIA 6123?
Insoluble in water. Soluble in oils/fats.
What is RADIA 6123 used for?
Lubricating oil: vegetal product
What is the melting point of RADIA 6123?
The melting point is -18 °C and the boiling point is > 350 °C.