Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ACTACLEAR 2400 CARRIER FLUID
- Product Code
- 05493226
- Chemical Name
- Nonylphenolpolyether
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Polyol components for the production of polyurethanes
Manufacturers & Suppliers
Covestro Deutschland AG
manufacturer
COVDEAG-CEO-GI-GQ-GPS&RA-GPS&I 51365 Leverkusen
+49 214 6009 8134
Emergency Contacts
Chemtrec
+1-703-527-3887
Antigifcentrum (Centre Antipoisons)
+32 (0) 70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
polyether
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| polyether | --- | --- | No |
This product contains no substances of very high concern in concentrations where an information obligation applies (REACH Regulation (EC) No. 1907/2006, Article 59).
Notes
No dangerous ingredients according to REACH-Regulation (EC) No. 1907/2006.
First Aid Measures
Emergency procedures for chemical exposure incidents
Take the person into the fresh air and keep him warm, let him rest; if there is difficulty in breathing, medical advice is required.
In case of skin contact wash affected areas thoroughly with soap and plenty of water. Consult a doctor in the event of a skin reaction.
Hold the eyes open and rinse with preferably lukewarm water for a sufficiently long period of time (at least 10 minutes). Contact an ophthalmologist.
DO NOT induce the patient to vomit, medical advice is required.
Immediate Medical Attention
Consult a doctor in the event of a skin reaction. Contact an ophthalmologist. Medical advice is required if there is difficulty in breathing or if swallowed.
Medical Treatment
Basic first aid, decontamination, symptomatic treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2), Foam, extinguishing powder, in cases of larger fires, water spray should be used.
High volume water jet
Burning releases carbon monoxide, carbon dioxide, oxides of nitrogen and traces of hydrogen cyanide. In the event of fire and/or explosion do not breathe fumes.
Firefighter Protection
Firemen must wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Put on protective equipment (see section 8). Ensure adequate ventilation/exhaust extraction. Keep unauthorized persons away.
Do not allow to escape into waterways, wastewater or soil.
Take up with absorbent for chemicals or, if necessary with dry sand and store in closed containers.
Materials: absorbent for chemicals, dry sand, closed containers
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin and eyes.
Keep container tightly closed and dry.
Keep away from foodstuffs, drinks and tobacco. Wash hands before breaks and at the end of workday. Keep working clothes separately. Change contaminated or soaked clothing immediately.
Precautions should generally be taken against electrostatic charges according to the equipment used and the way the product is handled and packaged.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves are recommended. Conditionally suitable materials for protective gloves; EN 374: Nitrile rubber - NBR (>= 0.35 mm) Breakthrough time not tested; dispose of immediately after contamination.
Wear eye/face protection.
Unless the product is entirely enclosed, do not handle it until you have studied the respiratory precautions issued by the appropriate authority or accident prevention association. If vapors form, respirators must be used. Put on full-mask respirator with filter type ABEK.
Wear suitable protective clothing. Safety precautions for handling freshly molded polyurethane parts: see section 16
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition below initial boiling point.
This information is not available.
No hazardous reactions when used as directed.
This information is not available.
This information is not available.
No hazardous decomposition products when stored and handled correctly.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
None disposal into waste water.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
See section 6 - 8.
See section 6 - 8.
See section 6 - 8.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Any national regulations for the handling of hazardous substances must be observed.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ACTACLEAR 2400 CARRIER FLUID?
The signal word is no signal word.
What is the physical form of ACTACLEAR 2400 CARRIER FLUID?
ACTACLEAR 2400 CARRIER FLUID is a liquid appearing as liquid with colourless, transparent color. It has mild odor.
What is the solubility of ACTACLEAR 2400 CARRIER FLUID?
not established
What is ACTACLEAR 2400 CARRIER FLUID used for?
Polyol components for the production of polyurethanes